Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹28.2 L+₹23,857 (0.85%)Rejected-AOC BUNGLOW 19 THE MALL KAMPTEE CANTT | KAMPTEE CANTT | NAGPUR | MAHARASHTRA | 441001 | L2 | Rejected-AOC Not Lowest | |
| 3 | L3₹28.3 L+₹29,354 (1.05%)Rejected-AOC | L3 | Rejected-AOC Not Lowest | |
| 4 | L4₹28.6 L+₹62,673 (2.24%)Rejected-AOC A 91 DEFENCE COLONY AGRA CANTT AGRA UP 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-AOC Not Lowest | |
| 5 | L5₹2.9 Cr+₹2.6 Cr (930.5%)Rejected-AOC | L5 | Rejected-AOC Not Lowest |
Tender Value
Refer Docs
EMD Value
₹66,000
Closing Date
14 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
PROVN OF GUARD REST ROOM WITH ATT BATHROOM AND TOILET FOR 01XJCO AND 08X OR AT BHAJIMANDI GATE AT KAMPTEE UNDER GE KAMPTEE
2023_MES_617456_2
84781/E8
Open Tender
Civil Works
Item Rate
60 days
GE KAMPTEE
As per tender documents
7 documents required · 7 mandatory
₹500
GE KAMPTEE
₹66,000
Yes
4 Jan 2024
24 Nov 2023
15 Dec 2023
24 Nov 2023
14 Dec 2023
30 Nov 2023
Amount
(A) BUILDING WORKS
Surface dressing not exc 15 cm deep and getting out in soft /loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5m in depth and not exc 1.5m in width for fundation etc or for shafts, wells, cesspits, manholes, pier holes etc. not exc and getting out in sqm on plan & getting out in soft/loose soil complete all as specified and directed.
All as per item No 1.02 here in above but each additional 1.5 m or part thereof in depth beyond the first 1.5m complete all as specified and directed.
Material and labour for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and fillings complete all as specified and directed.
Material and labour Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) using 20mm graded aggregates as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.
Material and labour Form work to side of columns and similar work for fair finished complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) using 20 mm graded aggregates as in columns and pillars etc complete all as specified and directed.
Material and labour Form work to side of sides and soffits of floor, lintel or roof beams including supports, overhangs etc also splays between floor and beam etc complete for fair finished complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.
Material and labour Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) using 20 mm graded stone aggregate as in chajja etc complete all as specified and directed.
Material and labour formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide for fair finish complete all as specified and directed.
Material and labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Supply & Fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.
Supply & Fixing milt steel TMT bars 6 to 8 mm dia cut to length, bent to shape requred, including crancing bending and binding spirally for hooping for columns, hooking ends & binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.
Supply & Fixing mild steel TMT bars 5 mm dia & over upto & including 10mm dia as stirrups, spacers and binders cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.
Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.
All as per item No 1.19 here-in-above but half brick wall in CM 1:4 complete all as specified and directed.
Material and labour Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished fair and even with out using extra cement complete all as specified and directed.
Material and labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured & paid separately).
Supply only Liquid water proofing compound of approved quality complete all as specified and directed.
Material and labour Rendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.
Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Material and labour hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed.
Material and labour for RCC M-25 design mix as in ground floor (for grade slab)cover slab, landings etc using of graded stone aggregate of suitable size (reinforcement will be measured and paid separately ) complete all as specified and directed.
Material and labour providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg), as in sub base in floor/paving etc complete all as specified and directed.
Material and labour for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floor finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floor finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour coloured glazed ceramic tiles 300x450x6 to 7mm thick, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.
Materials and labour for scratch free light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.
All as per item No 1.32 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.
Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.
Material and labour 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.
Material and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, parapets and copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed
Material and labour for prepartion of new plastered surface and applying two coats of oil bound distemper over a coat of Primer over two coats of putty complete all as specified and directed.
All as per item No 1.37 here-in-above but in ceiling complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preperation of surfaces complete all as specified and directed.
Supply & fixing Pressed steel frames 125x60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) for filling hallow section complete, etc complete all as specified and directed.
Supply & fixing Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
Supply & fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Supply & fixing Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.
Material and labour for providing cement concrete 1:3:6 type C-1 (Using 20mm graded stone agg) as in fixing of hold fast, bed blocks etc includig necessary form work as required complete all as specified and directed.
Supply & fixing flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30mm thickness and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for door etc, as specified in SSR part-I, Sec-08, Clause 8.24(a), complete all as specified and as directed.
Supply & fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed.
Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing complete all as specified and directed.
Supply & fixing 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq. m in each pane complete all as specified and directed
Supply & fixing 5.50 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed
Supply & Fixing Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed
Material and labour preaparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.
Material and labour for Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply & Fixing 100mm long medium weight cold rolled mild steel butt hinges complete all as specified and directed.
Supply & Fixing 150 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.
Supply & Fixing 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.
Supply & Fixing150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply & Fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.
Supply & Fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.
Supply & Fixing Towel Rail 20mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supply & Fixing vitreous China squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.
Supply & Fixing 110 mm dia PVC (SWR) 'S' / 'P' trap, including jointing with solvent cement complete all as specified and directed.
Supply & Fixing 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make: Prayag Cat No 501or equivalent in specified makes.
Supply & Fixing Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.
Supply & Fixing Vitreous China urinals, halft stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
Supply & Fixing 15 mm bore CP Urinal spreader for urinals complete all as specified and directed.
Supply & Fixing PVC connection 15mm size, 450mm long with PTMP nuts both side complete all as specified and directed.
Supply & Fixing Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 1000 litres capacity complete all as specified and directed.
Supply & Fixing ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specified and directed.
Supply & Fixing bib taps fancy type chromium plated, with crunch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified and directed.
Supply & Fixing stop cock /Angle cock fancy type chromium plated, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed.
Material and labour 15mm GI tubing 'Medium grade' with all fiting and fixed complete tom wall and celing or laid in floor of fllowing sizes complete all as specified and directed.
All as per item No 1.72 above but 20mm bore complete all as specified and directed.
Supply & Fixing 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.
Supply & Fixing PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Material and labour PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.
Supply & Fixing CP grating of size 100mm dia complete all as specified and directed.
Supply & Fixing PVC cowl slotted vent cowl 110 mm size complete all as specified and directed.
Supply & Fixing in chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15mm bore of pipe Complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Material and labour for provision of water proofing treatment by using APP torch on mineral/slate finished membranes over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per Square metreon clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3mm thick and weight not less than 3.00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps respectively and applying two coats of aluminium paint @ 100 ml per sqm complete all as per manufacturers instructions complete all as specified and directed.
Material and labour for rendering 10mm thick in cm 1:4 on brick or concrete surfaces using water proofing liquid compound and finishing surfaces even & fair without using extra cement complete all as specified and directed. Note: Water proofing liquid will be measured and paid separately.
Material and labour for treating the top surface of filled earth and soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
Material and labour for treatment at Junctions of the Wall and the Floor at the rate of 7.5 litres of emulsion per per Sq metre of the vertical wall or column surface complete all as specified and directed.
Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
(B) SEWAGE DISPOSAL NOTE :- Items of TMT bar, 1:4:8 D2 and earthwork such as Excavation, returning filling, removing etc shall be measured under relevant items here-in-before.
Material and labour for excavating over areas, not exc 1.5 m deep and getting in hard/dense soil out complete all as specified and directed.
Material and labour for excavating over areas, exc 1.5 m deep and not exc 3m getting in hard/dense soil complete all as specified and directed.
Material and labour for brick with fly ash brick with sub class 'B' bricks using old size bricks straight of curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed.
Material and labour for providing RCC 1:1 1/2:3 type A-1(nominal mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour Rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished fair and even complete all as specified and directed.
Material and labour Salt glazed stoneware drain pipes laid in trenches and jointed as specified of 150mm dia complete all as specified and directed.
Material and labour concrete bed to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete in PCC (1:4:8) complete all as specified and directed.
(C) ROAD / PATH NOTE :- Items of earthwork such as removing excavated material shall be measured under relevant items here-in-before.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
Material and labour for providing cement concrete 1:5:10 type E2 (Using 40mm graded stone aggregate) in sub base/sunken portion complete all as specified and directed.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Supply & fixing Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
Material and labour for PCC in coping, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed type B0 (1:2:4) using 12.50mm graded aggregate complete all as specified and directed.
(D) AREA DRAINAGE NOTE :- Items of Brick work and earthwork such as Excavation, removing etc shall be measured under relevant items here-in-before.
Material and labour for providing cement concrete 1:5:10 type E2 (Using 40mm graded stone agg) as in foundation, mass concrete and filiings complete all as specified and directed.
Material and labour Rendering 15mm thick on brick/stone masonry surface or other than fair faces of brick with CM 1:4 complete all as specified and directed.
Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.
Material and labour for providing cement concrete 1:2:4 type B1 (Using 12.50mm graded stone agg) in for cills, steps plinth courses, coping etc and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
(E) INTERNAL ELECTRIFICATION
Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specified and directed. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.
All as per item No 5.01 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.
All as per item No 5.01 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.
All as per item No 5.01 above but One 3 pin 5 amp socket outlet point on the independent board with other switches, complete all as specified and directed.
All as per item No 5.01 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.
Supply & Fixing switch modular type single pole one way 6 Amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: legrand/ Crabtree / Indo Asain.
Supply & Fixing socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. Make: Legrand/ Crabtree / IndoAsian.
Supply & Fixing switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make:Legrand/ Crabtree / IndoAsian.
Supply & Fixing socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Legrand/ Crabtree / IndoAsian.
Supply & Fixing ceiling rose, surface type, three terminals 5 amps complete all as specified and directed.
Supply & Fixing fan step regulator, 120W - 2 module complete all as specified and directed.
Supply & fixing 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make: Havells/ Jaquar/ Halonix/ Bajaj
Supply & fixing LED baton fitting 2' length including drivers having energy consumption, 10/11W, 230 V, 50Hz, 6500K, not less than 800 lumen prewired, complete all as directed by the Engineer-in-Charge. Make : Havells/ Jaquar/ Halonix/ Bajaj
Supply & fixing LED light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed. Make: Havells/Jaquar/Halonix/Bajaj
Supply & fixing building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc.) complete all as specified and directed. Make : Havells/Jaquar/Halonix/Bajaj
Supply & fixing ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make: Bajaj/ CG/ Havells.
Supply & fixing Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose with making holes complete all as specified and directed. Make: Bajaj/ CG/ Havells.
Supply & fixing sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.
Supply & fixing MCB single pole & Neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.
Supply & fixing MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.
Material and labour for earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the Material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 type B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.
(F) EXTERNAL ELECTRIFICATION NOTE :- Items of earthwork such as Excavation, returning filling, removing etc shall be measured under relevant items here-in-before.
Supply and fixing Double wall corrugated High Density Polymer Ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, poles including bends, sockets and other connected accessories complete all as specified and directed. Make : Ketron/Tirupati or equivalent in specified makes.
Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm, 4 core including testing after laid and jointed complete all as specified and directed. Make: Polycab / Havells / Finolex
(G) EXTERNAL WATER SUPPLY NOTE :- Items of earthwork such as Excavation, returning filling, removing etc shall be measured under relevant items here-in-before.
Supply & fixing GI tubing medium grade with all fittings laid in trenches and fixed complete to wall and ceilings or laid in floors as socket, bends/ elbow, union, tee etc for 25mm bores complete all as specified and directed.
Supply & fixing in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 25mm bore including taking down / removing old unserviceable valve complete all as specified and directed.
M/s T.S.JOHAR
DEESHA CONSTRUCTIONS
M/s Shrangi Rishi Construction
Rehal Construction
Devika Constructions
DIVESH HARISH SIRIAH
AK CONSTRUCTION
Bidder Name
M/s Shrangi Rishi Construction
Rehal Construction
DEESHA CONSTRUCTIONS
M/s Rahul Traders
Devika Constructions
AK CONSTRUCTION
M/s T.S.JOHAR
DIVESH HARISH SIRIAH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .