Renovation and Const. of ro...

S/E of 16 sqmm 4 core armoured cable

Providing and Fixing motor Havells 1-HP cooper single phase self priming monoblock pump complete in all respect with all accessories

S/E of surface/wall mounted =20W LED 4 feet fitting with Epoxy Powder coated white/Grey extruded aluminium channel housing for efficient heat dissipation. Total system lumen of 20 watt LED should be = 2000 or above in cool day light (5700K to 6500K), Power factor )0.95, CRI )80, Average life )50000 hours. Complete with mounting Brackets and accessories as required with connections(Industrial) Make: Philips, Havells, Wipro, Bajaj. (NS)

S/E of 15 watt surface mounted LED Downlight New generation,Energy Saving, aesthetically designed sleek surface mounted t Pressure die- cast Aluminum luminaire in powder coated white finish in round profile with optimized heat sink for efficienct and independent electronic LED Driver..Total system lumen of 15 watt LED should be 960 to 1080 or above in cool day light (3000k-5700K as per desired by Engineer -in-charge), Power factor )0.95, CRI (Ra) )80, Average life ) 35000 hours, complete with all accessories as required with connections (Industrial) Make: Havells /Bajaj/Wipro/Philips/Crompton (NS)

S/E of 10 watt wall mounted Decorative light casted in Mild steel complete with all accessories with connections as per drawings Make: Havells /Bajaj/Wipro/Philips/Crompton (NS)

Supplying and fixing of copper bus bar 100 amp 4 bars duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. (NS)

Pdg. and fixing digital metering equipment for LT cubical panel consisting of 96mmx96mm 0-500V, volt meter with selector switch, Amp. meter (of required ratio upto 600/5 amp.) with selector switch and required CTs 3 Nos. a set of 3 No. phase indication lamps RYB LED.(NS)

S/I/T/C of push ON/OFF type 25 A modular type motor starter switch (white color) for AC`s including the cost of petty material required to compete the job upto entire satisfaction of Engineer-in-charge. (NS) Make:- Schneider/Crabtree/Legrand/Anchor/Havells

Providing and installing split type air conditioners, five star rating inverter type with copper coils 1.6 ton capacity ± 10%) fitted with super tropical - DC PAM inverter- return cooled - rotary compressor operating on refrigerant R-410-A/R-32 suitable for wall mounting confirming to IS : 1391 (part-2)/92 (except power consumption norms) with upto date amendments, suitable for operating on 230 volts, 50 Hz single phase A.C. supply having following specifications:-(i) Cooling coil row -3 Nos.(ii) Air flow (CMH)1100 -1450 cum/ hr.(iii) Sound level (H/M/L)- 41/38/34/25(silent mode)(iv) Louvers swing- 3D plus 3D Auto etc. complete in all respectMAKE :- O General/Mitsubishi (Heavy Industries) (five star rating) Model as approved by the Engineer-in-Charge including: 1. Providing and installation of automatic voltage stabilizer of 5.00 KVA capacity (heavy duty) copper wound 100 up voltatge complete in all respect. (N.S.) Make:-Voltstar,V-Guard,Microtek 2.Providing and fixing extra copper tubing/regrigerent pipe for above split air conditioners (if required) consisting of inlet, outlet pipes, insulation and electric wiring etc. as per requirement, complete in all respect beyond 4.0 metres length. (NS) NOTES :- INSTALLATION OF AIR CONDITIONERS INCLUDES:- 1. Mounting/ fitting indoor and outdoor units at their respective locations 2. Providing and laying refrigerant pipe line of four metres length and beyond (if required) and connecting both the units after drilling holes in the wall, if required. Thickness of the copper tubing shall not less than 0.80 mm. 3. Insulating the suction pipe with expanded polythene pipe tubing. 4. Providing and laying drain pipe to throughout the condensate water being formed in the indoor unit 5. Leak testing entire system 6. Charging refrigerant gas in the unit 7. Electric wiring : suitable electric wiring and switch should be provided with in 4 metres of the location of the units as per requirement 8. PVC channels for concealing the pipes etc. 9. Refrigerant piping thickness- 18 guage (1 mm) (i) Liquid line :- 6.35mm (1/4`) (ii) Gas line:- 15.88mm(5/8`) 10. Providing and fixing 2.5 sqmm x 4 core coper wire sheathed for connections and communication between indore unit to outdoor unit. (NS) 3.Providing and fixing in position powder coated MS stands for outdoor units of air conditioners including suitable nuts and bolts etc. of best quality complete in all respect (NS)