SPECIAL REPAIR TO CERTAIN OTM ACCN AT AIR FORCE MULLANPUR UNDER AGE (I) HIGHGROUND CHANDIGARH

Amount

Taking down chowkhats or frames with shutters without taking off shutters from the frames, area not exc. 1.5 Sqm each and removing from the site including cutting holes for taking out hold fasts and making good dismantled portion in CM 1:3 or in PCC 1:2:4 type B-1 after inserting new hold fast/chowkats incl any cutting hole required for fixing new chowkats, complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frames, area exc 1.5sqm not exc. 4 Sqm each and removing from the site including cutting holes for taking out hold fasts and making good dismantled portion in CM 1:3 or in PCC 1:2:4 type B-1 after inserting new hold fast/chowkats, complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed.

Supply and fix factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3 to 3/3.

Supply and fix factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.

Material and labour for Mild steel framed work such as grills, gratings or guard bars etc with ends of bars shouldered and/or riveted or forged into spikes,barred iron doors,ladders walkways railings etc conforming to Fe.290.Gde-E-165,complete all as specified and directed.

Material and labour for Applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, over 10cm width or girth, including preparation ,complete all as specified and directed.

Supply and fix Sheet glass 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified ,complete all as specified and directed.

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery. , complete all as specified and directed.

Supply and fix 125 mm x 60 mm pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete as specified. Note: The sizes/dimensions and type (profile) of frames shall be as shown in IS and thickness of MS sheet 1.25mm thick, complete all as specified and directed .

Supply and fix pressed steel frames of size 105x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc complete all as specified and directed.

Material and labour for PCC 1:2:4 type B0 using 12.50 mm graded crushed stone aggregates as in filling of pressed steel chowkhats, cill, step and for inserting hold fasts etc and similar work , complete, all as specified and directed.

Supply and fix Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side 35mm thick complete all as specified and directed.

Supply and fix 35 mm thick 2nd class hardwood (Hollock) glazed and skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified and directed.

Supply and fix 150mm extruded aluminium alloy handle, fabricated type, anodized, complete all as specified and directed.

Supply and fix 200 mm long aluminum anodized barrel tower bolts of extruded section, complete all as specified and directed.

Supply and fix Aluminium alloy, anodised sliding door bolts 300mm long with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix Mild steel helical door spring, 300 mm ,ordinary rat tail, rod pattern springs including roller and roller plate complete, fixed to chowkhats , complete all as specified and directed.

Material and labour for Applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces, over 10cm width or girth, including preparation ,complete all as specified and directed.

Supply and fix Factory made wood grain printed PVC sheet door frame 50 mm x 47 mm with a wall thickness as 5 mm, made out of extruded 5mm PVC foam sheet, mitre cut at two corners and joined by inserting 2 Nos of 150mm long brackets of 15 mm x 15 mm MS square tube. The two vertical door profile are to be reinforced with 19 mm x 19 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame shall be fixed to wall using 65/100 mm long MS screws through the frame by using PVC fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member & edges will be painted to match with printed sheet complete all as per shown on SSR 2010 Part-II complete all as specified and directed. Make: Rajshree/ Sintex or equivalent of make as mentioned in Appendix 'A'.

Supply and fixing factroy made wood grain printed solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded decorative colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and decorative coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of decorative colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing.

Supply and fix 100 mm size butt hinges stainless steel fixed to PVC/aluminium door etc. ISI Marked , complete all as specified and directed.

Supply and fix, Drapery rod 20mm dia, fancy type, any shade, including set of fixing bracket, fennels etc, fixed to wall, length 1.50 to 2.50 metre, fixed as in repairs, including removal of old to store for reuse or credit, complete all as specified and directed.

Supply and fix 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around,complete all as specified and directed

Supply and fix continuous ( piano ) hinges mild steel, bright finish or electroglavanised,size 30mm complete all as specified and directed

Supply and fix second class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

Supply and fix hasp & staple safety type aluminium anodised 100mm size fixed with screws complete all as specified and directed

Supply and fix magnetic catches suitable for shutter thickness 20mm, complete all as specified and as directed.

Dismantiling ceiling boards of any description including cover fillets, complete all as specified and directed

Supply and fix Modular False ceiling with vinyl laminated gypsum tiles having 8 mm thickness, of size 595mmx595mm the tiles to be fixed with suspension system (Grid) of size 24mm x32mm , made of hot dipped galvanised steel section to prevent corrosion and the exposed surfaces of grid chemically clened capping prepainted /backed in polyester paint. The standared procedure for installation of grids is to be followed, where main runners of standard lenth of 3600 mm used along with cross section of 1200mm c/c . Wall angle (size 22mm x22mm) of the same quality as the grids to be used on the periphery along the wall or partion using screws at 600mm c/c and cross tee (24mmx23) tobe interlocked between main runner at 600mm c/c(max) to form agrid of 600mm x600mm. The main runner to be hung from the sofit with the help of 4mm dia GI wire hanger and 6mm dia wire anchore fastner @ 1200mm c/c ( Max ). Make : Diamond) Note : The work to be carried out by the auth manufacturer only.

Material and labour for repair to existing false ceiling of any type with mineral fiber tiles having 16 mm thickness, of size 595mmx595mm tiles and refixing/repair of existing frame work with additional hanger, replacement of defective parts of aluminum frame work complete all as sepcifeid and as directed Note:- Replacement of addintional member of frame work if required is also included in item rate.

Dismantling of wall lining , any thickness, including cover fillets, complete all as specified and as directed

Supply and fix Solid PVC Wall panneling including of 5 mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed

Supply and fix 5 mm thick PVC sheet fillet of width 35 mm thick wall panelling inclusive of fixing of wall to make PVC frame, complete all as specified and directed.

S & F Powder coated Anodised aluminium (minimum 15 micron) frame for doors, windows, ventilators and fixed glassing etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix Powder coated Anodised Aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as peg stays 150mm long (1no.). hinges type B-21 100mm long(2 no.) suitable handle (1 No) incl complete all as specified and directed.

Supply and fix powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Supply and fix 5.5 mm thick tinted glass in aluminium doors & windows with rubber packing including hacking out old broken glass ( any thickness, size from aluminium beading ) complete all as specified and directed

Supply and fix in repair 5.5 mm thick tinted glass in aluminium doors & windows with rubber packing including hacking out old broken glass ( any thickness, size from aluminium beading ) complete all as specified and directed

Supply and fix 12mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fix Figured glass, pin head type 4 mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with rubber packing and aluminium bidding including provision of glazing pins/ spring clips wherever necessary,complete all as specified and directed.

Supply and fix in repair double action floor spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty including taking down un-serviceable floor spring complete all as specified and directed.

Supply and fix door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

Supply and fix in repair 12 mm thick partical board medium density,flat pressed, single layer type or three layer type with BWR type adhesive, fixed in Aluminium frame complete all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring over all length of plate 150mm complete all as specified and directed.

Taking down existing aluminium doors/windows and re-fixing after tightening loose screw including replacement of unserviceable screw complete all as specified and directed.

Supply and fix in repair of damaged aluminium beading of aluminium doors windows with new beading complete all as specified and as directed.

Supply and fix in repair of un-serviceable rubber packing of aluminium door & window including taking down carefully glass panels & re-fixing the complete all as specified and as directed.

Dismantling of brick tiles or terracing tiles single layer in roofs pointed in cement mortar, stacking serviceable brick tiles for re-use, brick bats for credit and removal of rubbish out side MoD land, complete all as specified and directed.

Demolition of un reinforced cement concrete of any description or as roof padding and coving concrete and in any position not otherwise specifically provided for and remove all the debris out of MoD land complete all as specified and as directed.

Material and labour, roughing surface of old concrete slabs by wire brush sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.00 Kg/Sqm on roof surface, removal of rubbish off the premises upto a distance not exceeding 50 metres, complete all as specified and directed.

Material and labour, providing cement concrete type B0, (1:2:4) 12.5 mm graded aggregate stone as in padding in roof required thickness to maintain required slope including finished the surface fair and even without using extra cement,as in roof kerb,benching and like complete all as specified and directed.

Material and labour, cleaning the new or old pastered or concrete surfaces and water proofing treatment of roof horizontal surfaces consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of minimum 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

Material and labour, cleaning the new or old pastered or concrete surfaces and water proofing treatment on vertical surfaces of roof consisting as under including taking down old membrane:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of minimum 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

Material and labour for Hydraulically pressed concrete tiles plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed, pointed in CM 1:3 mixed with 5% crude oil by weight of cement.

All as per serial item No 55 here in before but except burnt clay tiles/concrete tiles ,(old service able ties as obtained from serial item No 49 here in before shall be reused) ,complete all as specified and directed. Note :- The cost of cleaning and washing of brick tiles for re-use shall be deemed to be included in the unit rate quoted by the tenderer.

Material and Labour, 40mm thick brick tiles laid on and including 15mm thick cement screed bed in CM (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed.

All as per serial item No 57 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable tiles as obtained from Serial item No 49 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.

Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair PVC (SWR) bend 110 mm bore complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250 n exc 500ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including taking down float valve and refixing etc complete as specified and as directed. (Cleaning repairing etc. measured separately).

Dismantling of PVC water storage tank/Demolition of RCC tank of capacity exceeding 250 litre but not exceeding 500 litre, including removal to store or unserviceable to as credit , complete all as specified and directed.

Supply and fix Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified and directed.

Supply and fix in repair brass ball valves, 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix in repair Gun metal gate valves with iron wheel head screwed both end for iron pipe and fixed 20mm bore complete all as specified and as directed

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor & roof etc., including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor & roof etc., including cleaning for refixing or removal to store, complete all as specified and directed.

Supply and fix Steel water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors or in roofs, complete all as specified and directed.

Supply and fix Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors or in roofs, complete all as specified and directed.

Re-fixing old steel water tubing and connections of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling or in roofs , complete all as specified and directed.

Re-fixing old steel water tubing and connections of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling or in roofs , complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces of wall/ceiling/chajja/parapet wall and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scafolding and form works up to 5 mtr height where necessary.

Material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4), and finish the surface even and fair, complete all as specified and directed Note : The rate quoted by the Contractor is deemed to be included necessary scafolding and form works up to 5 mtr height.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour joint free non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour joint free non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Supply and fix glazed ceramic joint less tiles coloured of size 450 x 300 x7 mm thick joint free on vertical surfaces such as dados etc set and jointed in neat cement slurry and pointed in coloured cement, incl screed bed 10 mm thick CM (1:4) complete all as specified and directed.

Material and labour for Vitrified ceramic tiles light shade, 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including cement screed 15 mm thick in CM 1:6 complete all as specified and directed.

Material and labour for Vitrified ceramic tiles light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including cement rendering 10 mm thick in CM 1:4 complete all as specified and direction.

M& L for 300 x 300mm 15-20mm thick high density coloured parking endura tiles laid in floor with neat cement slurry @3.00Kg/Sqm over and including 15mm thick screed bed of cement mortor 1:4 and pointed with white cement with pigment to match the shade of tiles , complete all as specified and as directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded and pointed in cement mortar, complete all as specified and directed.

Material and labour, 18-20mm thick Granite (pure black colour) stone work (table rubbed and polished) as on horrizontal/vertical surface such as cooking platforms, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:6), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Machine cut Kota stone slab, 20mm to 25 mm thick as in flooring, laid over and including cement screed bed 15mm thick in cement mortar (1:6), and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and polishing (granite finish polish) complete, all as specified and directed.

Material and labour for machine cut kota stone slab as in skirting 20-25mm thick over and including 10 mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing polishing etc complete all as specified and as directed.

Rounding to edges of stone slabs18 to 20mm thick as in in steps, jambs, pillars, cokking plateforms and likes complete all as specified and directed.

Demolition of brickwork / brick masonry, built in cement or cement lime mortar , including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Material and Labour for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, as in boundry wall, over head water tank staging etc, complete all as specified and directed.

All as per item No.87 here in before but except bricks. Note:- Serviceable bricks retrieved from Serial item No 86 here-in-before shall be used(rates include for cleaning of bricks also)

Material and labour for brick work with sub class 'B' brick straiight or curved on plain exceeding 6m mean radius as in half brick thick wall in CM(1:4) complete all as directed.

Material and labour for precast cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate louvres and jallies, 45 mm thick (measured solid) incl. all moulds set in CM 1:4 complete all as specified and directed

M &L for precast cement concrete 1:2:4 type B1 using 20 mm graded aggregate columns, posts, boundary pillars of any section indicated, with plain fair faces, including chamfers, weatherings, throating etc including setting in CM 1:4 complete with joint to match all as specfied and as directed

Demolition of un reinforced cement concrete of any description and in any position not otherwise specifically provided for and remove all the debris out of MoD land complete all as specified and as directed

Material and labour two coats of cement base paint over a coat of alkali resistant priming paint on newly plastered surfaces including preparation of surfaces, complete all as specified and directed.

Material and labour for Rendering 15 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth, without using extra cement, complete all as specified and directed.

Material and labour for Rendering 5 mm thick in cement mortar (1:3) as on concrete surfaces (such as Top & side of chhaja,facia,sofit/ceiling etc) finished even and smooth without using extra cement, complete all as specified and directed

Demolition of cement concrete (Reinforced) of any description and in any position complete all as specified and directed

Material and labour for Reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed

M& L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Material and labour for TMT steel bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete as in reinforcement to concrete all as specified and as directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish out MoD land complete all as specified and as directed.

Material and labour for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and directed. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

Dismantling of cast iron soil drain pipes, waste vent pipes in any position jointed in cement mortar and taking out of trenches by excavation if required, in any position including fittings (50/75/100mm dia) including cleaning for re-fixing or removal to store or for credit complete all as specified and directed.

Material and labour for 75mm dia Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

Material and labour for 50mm dia Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed.

Material and labour for 100mm dia Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

Supply and fix cast iron bend 75mm dia (any radius) diminishing pieces (larger bore measured) with cement joint complete all as specified and directed.

Supply and fix cast iron bend 100mm dia (any radius) diminishing pieces (larger bore measured) with cement joint complete all as specified and directed.

Supply and fix cast iron cowls for 50mm bore pipe complete as specified and as directed.

Supply and fix cast iron socket for 100mm bore pipe complete as specified and as directed.

Supply and fix cast iron socket for 75mm bore pipe complete as specified and as directed.

Supply and fix cast iron P or s trap for 100mm bore pipe complete as specified and as directed.

Supply and fix Cast iron floor trap, with grating including jointing to waste pipe dia 75mm fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Material and labour for Cutting chases not exc 10 cm girth in brick walls for concealed water tubing and making good, complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single sheeted in any length with rubber ring joints, laid in trenches or in floors, of 75 mm bore including taking down old pipes and ncluding necessary excavation and demolition of PCC etc if required complete all as specified and directed.

Supply and fix PVC (SWR) pipes single sheeted in any length with rubber ring joints, laid in trenches or in floors, of 110 mm bore including taking down old pipes and ncluding necessary excavation and demolition of PCC etc if required complete all as specified and directed.

Supply and fix in repair Double bowl sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1145mm x 510mm bowl size 510mm x 460mm x 230mm complete all as specified and directed. (Make NIRALI Model Elegance Glossy or equivalent of make as mentioned in Appendix 'A')

Supply and fix in repairs vitreous china squatting pan (Orissa pattern) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including trap set in and including concrete complete including making good to floor of size 580x440mm white with intergral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush). (Make CERA Model No S3010105 or equivalent of make as mentioned in Appendix 'A')

Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) , white, of style and pattern as existing, complete with and including plastic seat cover, S trap, white, size 580x440mm fixed all as directed. (Make : CERA Cat No S1050101 or equivalent of make as mentioned in Appendix 'A')

Supply and fix in repair vitreous china oval under/over counter wash basin of any colour , size 560x470mm (Make ; CERA, Cat No S2030104 washbasin or equivalent of make as mentioned in Appendix 'A') including CP brass waste coupling and CP bottle trap etc complete all as specified and as directed.

Supply and fix in repair Vitreous china wash basin of size (550 x 400 mm), white, flat back, supporting on and including suitable angle iron bracket, including 32mm dia CP brass coupling, along with PVC waste pipe complete, including connection to pipe etc, with and including 15mm dia 450mm long PVC connection pipe with steel check nut (exluding taps) including & pinning in ends of brackets and taking down and removal of old wash hand basin , complete all as specified and directed.(Make CERA, cat no S20401102 or equivalent of make as mentioned in Appendix 'A')

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern 10 Ltr capacity, low level, white, with inlet,ball valve, float and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any and fixing complete all as specified and directed. (Make - CERA, Cat No B1020102 cistern or equivalent of make as mentioned in Appendix 'A')

Supply and fix in repair Health faucet with hose & hook (1200mm long) fixed in repairs complete all as specified and directed Make- Jaguar Product code : ALD-CHR-573 or equivalent of make as mentioned in Appendix 'A'.

Supply and fix in repair Bib taps, cast copper alloy, chromium plated, fancy type, screwed down, with crutch or butterfly handle, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed.

Supply and fix in repairs Angle cock cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore complete all as specified and as directed.

Supply and fix in repair Pillar taps, 15 mm dia bore cast copper alloy chromium plated fancy type, with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair wall mixer with provision for overhead shower 115mm long bend pipe on upper side, connecting legs and wall flanges (Make; Jaguar, Product code CON-CHR-273NUPR, Product range- Continental or equivalent of make as mentioned in Appendix 'A') complete all as specified and as directed.

Supply and fix in repair central hole basin mixer with popup waste system with 450mm long braided hoes (Make : Jaguar, Product code- CON-CHR-169KNB, Product range-Continental or equivalent of make as mentioned in Appendix 'A') complete all as specified and as directed.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix in repair Bath rooom PVC cabinet mirror (Make : prayag or equivalent of make as mentioned in Appendix 'A' ) complete all as specified and as directed.

Supply and fix in repair Glass shelves for bath room corner set of three complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provide for complete all as specifed and as directed.

Supply and fix roof tusses, purlins, rails and fasterings and heavy bracket framing(beam, tee angle, channel of flat sections) of grade Fe-410 W(GdeE-250) including distance pieces, cleats etc complete all as specified and as directed.

Fixing only of roof tusses, purlins obtained from item No 134 after necessary cutting/welding complete all as specifed and as directed.

Material and labour for preparation of old painted steel surfaces over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old decorated wall surfaces by brooming down or steel wire brushing scrapping down smoke soot,moulds mass and efftorecerot salts and grading oil and greasy sport and applying one coat of white lime wash on walls including cornices etc complete all as specified and as directed.

All as per ser item no-138 here in before but on ceiling surfaes complete all as specified and as directed.

Material and Labour, complete removal of existing treatment on old decorated plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer over and including applying 01mm thick white cement based (JK/Birla) cement wall care putty, complete all as specified and directed. Note : The rate quoted by the contractor shall be deemed to including use and waste cost of ladder/ wooden platform etc.

Material & labour, removal decorative finishes complete from existing (external plastered) surfaces of walls and chhajas & preparation of surface by brooming down, and steel wire brushing/scrapping down where required; to remove efflorescent salts, grease spots etc.; by washing, rubbing down using sand paper and applying 01mm thick white cement based wall care putty (JK/Birla) including stopping of disturbed surfaces, and applying two coats of cement base paint, over and including a coat of primer, complete all as specified and directed. Note (s): (i) Rate quoted by contractor shall be deemed to include the cost of necessary use and waste sacafolding, ladder, wooden platform etc.

Material & labour, removal complete existing/ old decorated wall unplastered/plastered surfaces of walls by brooming down, and steel wire brushing/scrapping down where required; to remove efflorescent salts, grease spots, moulds, moss etc, & washing, rubbing down using sand paper and applying 01mm thick white cement based wall care putty (JK/Birla) including stopping of disturbed surfaces, and applying two coats of exterior acrylic emulsion (1st quality paint), over and including a coat of primer, complete all as specified and directed. Note(s): (i) Rate quoted by contractor shall be deemed to include the cost of necessary use and waste scafolding, ladder, wooden platform etc. (ii) Painting work shall stand guranted against fadding/Peeling off for 05 years & the cost against this aspect shall be deemed included in the rate of this item.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including a coat of alkali resistant primer, complete all as specified and directed.

Material and labour for preparation of old decorated wall surface and applying two of plastic emulsion paint of 1st quailty complete all as specified and as directed.

Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings, bell, security lights etc., removing materials from site and making good the disturbed surfaces of walls,ceilings etc complete all as specified and directed.

Material and Labour for Point wiring with 1.5 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding med grade, ISI marked PVC conduit not less than 20 mm dia with accessories concealed on wall/ceiling and incuding provision of 1.5 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken box or pressed steel terminal boxes made out of 1.6 mm thick MS sheet with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers incl and making good the disturbed surfaces as per existing for for one light/fan point controlled by one switch complete all as per specified and directed.

All as per item No 146 above but for one socket outlet point 5 Amps on same board complete all as per specified and directed.

All as per item No 146 above but for one socket outlet point 5 Amps on independent board complete all as per specified and directed.

All as per item No 146 above but with 2.5 sqmm cable for 3 pin 15 amps switch socket outlet (Power point) complete all as per specified and directed

Supply and fix switch piano 6 Amps flush type single pole one way 230 volt , AC supply complete all as specified and directed.

Supply and fix switch piano 16 Amps flush type single pole one way 230 volt , AC supply complete all as specified and directed.

Supply and fix socket outlet 3 pin 6 amps 230 volt AC flush type complete all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin 6/16 amps 230 volt. flush type complete all as specified and directed.

Supply and fix ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220 V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing fan regulator electronic step type (socket type), 250 volts, AC supply suitable for ceilling fan of any type/make/sweep complete all as specified and directed.

Supply and fix lamp holder PVC /polycarbonate type with back plate complete all as specified and as directed.

Supply and fix MCB single pole 240 volts, 50Hz , breaking capacity 10KA, B curve 5A to 32A, ISI marked all incl dismantling and taking down old unservicable complete all as specified and as directed.

Supply and fix MCB SPN 240 volts, 50Hz , breaking capacity 10KA, B curve 32 A, ISI marked incl dismantling and taking down old unservicable complete all as specified and as directed.

Supply and fix sheet metal enclosures distribution board SPN 8 ways double door , IP 43 protection, 240 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable for MCBs/RCBOs as incomer and out going complete dully grouted on the wall (flush) incl dismantling and taking down old unsv and making connections with suitable size of lugs and making good the disturbed surface matchig with existing surface complete all as specified and directed.

Material & labour for new earthing complete with galvanised earth plate electrode 60cm x60cmx 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers made out of galvanise iron or steel up to DB including earth work , PCC work, CI cover, funnel with watering pipe, wire mesh etc all as shown on plate No.3 of SSR Part-I, connected to earthing test point all as specified or indicated and testing on completion complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC insulated , unsheathed stranded copper conductor cable FRLS 6 sqmm drawing in concealed conduit not less than 25 mm dia incl conduit and making good the disturbed surface incl one additional PVC insulated , stranded copper conductor FRLS of 6.0 sqmm, green colour for earth continuity conductor incl taking down of unsv sub main wiring complete all as specified and directed.

Dismantling and taking down after disconning electrical connection old recessed mounting 600mmx600mm LED light carefully and refixing false ceiling complete all as per specified and directed.

Note: The total amount shall subject to adjustment of credit of Rs 42484.50 for old Materials as per Schedule of Credit

Babu Ram Sud and Sons

jmv engineers

Dhillon Construction Company

R R Traders