15TH FC 2ND INSTALLMENT TIED FOR 2025-26 1

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 B with standard specifications.

Cement Concrete 1:4:8 (One cement, four fine aggregate and eight course aggregate) mix using 40mm HBG ISS metal from approved quarry including cost and conveyance of all materials to site and labour charges, including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specifications as directed by the departmental officers

Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm x and BG 10 stiffened with MS angles of size 25mm x 25mm x 3mm laid over silver oak joists of size 10cm x 6.5 cm spaced at about 90 cm c/c and supported by consurina props of 10 cm to 13cm dia spaced of 75cm c/c complying with standard specifications and as directed by the departmentsl officers etc., complete

Supply and fabrication of steel and placing in position MS/Ribbed tor steel grills for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specificationsas directed by the departmentsl officers

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Brick work with C.M. 1:5 (One cement and five sand) mix using II clsss table moulded chamber burnt bricks of size 8 3/4" x 4 1/4" x 2 3/4" including cost and conveycnce of all materials and labour charges for neat finishing and curing etc., complete complying with standard specificationsas directed by the departmental officers.

Supply, delivery and filling with Gravel Filling from approved quarry in layer not more than 15 cm thick including watering with all layers and consolidation complying with standard specifications including cost and conveyance of Gravel at site and labour chrages and all other incidental charges etc., complete as per standard specifications

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three M- Sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Plastering with C.M.1:4 (One cement and four sand) mix using 12 mm thick including cost and conveyance of all materials and labour charges ete., complete complying with standard specifications as directed by the departmental officers

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two M- Sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete.

Supply, fabricating & fixing in position of M.S door of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.

Supply, fabricating & fixing in position of M.S window outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting the new iron works in all floors two coats of best synthetic enamel paint of approved quality and colour and brand to be approved by the executive engineer before use on works over one coat of promer including scrapping and preparation of surface cost of brushes high scoffolding charges neat finishing complying with standard speficications and as directed by the departmental officers.

Wiring with 2 x 1.5 Sq.mm PVC insulated single core unsheated copper conductor cable of 1100 V grade in suitbale heavy gauge MS conduit pipeon wall and ceiling with MS accessories inslush with wall with 150mm x 100mm 75mm MS switch box with 3mm thick hylum sheet cover with continuous earth wire conection of 14 SWG TC wire and making good of the concealed portion with suitable colour with concealed light point

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube. SD-89

Providing and fixing PVC rain water down fall pipe of the following 110mm dia with necessary TW clamps plugs, shoes, bends, other clamps, screws nails etc., complete complying withstandard specification. The rate is inclusive ofcost of removable iron gratingsof appropriate size. The sie of teak wood plugs used is 1509 x 25mm in front and 200 x 75mm in read wall side with a depth of 110mm. The pipe is to be fixed by means of U clamps at the centre of pipes to be fixed

Supply and deliveryof 63mm dia 6ksc PVC pipe 6KSC PV pipe inluding ost and conveyane and all other lanour charges etc., omplete as per standard specification. (M-0868 SR 2025-26 Pg-158)

Lowering the 63mm PVC pipe 6KSC PVC Riged pipe into trenches proper grade and alignment including cost and conveyance of all material and all other labour charges for laying , testing etc., complete (M-2010 SR 2025-26 Pg-253)

Refilling excavated earth including all Labour charges including cost and conveyance etc complete.(M-0075 SR 2025-26 Pg-32)

Charges for conducting Geophysical survey.

Drilling of 160mm dia bore well in hard rock area to any depth including labour charges for inserting casing pipe assembly in the drilled hole including transporting charges for the Rig and supporting vehicles from one place to another place. M-1049/SR-2025-26/Pg-168

Supply and delivery of 160mm dia PVC Casing pipe as per the standared specification. M-0873/SR-2025-26/Pg-158

Supply and delivery of Open well 200x75 LPMXM Bore well vertical Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. (WD-M1748 SR 2024-25 Pg.No-109)

Supply and delivery of Three Phase panel board.D.O.L with two level guard and auto start M-1071/SR-2025-26/Pg-169

Supply and Following of 3 Core 2.5Sqmm Submersible Cable Including Cost and Conveyance etc Complete. M-3077/SR-2025-26/Pg-176

Supply and Delivery Of 63mm HDPE Pipe Including all the labour charges etc.compete. M-1642/SR-2025-26/Pg-231

Cost and supply of Nylone rope for ereting pump including all charges M-1072 /SR-2025-26/Pg-

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. (WD-W0872,SOR 2024-25, IT.No - 17c, Pg.No-204)