CERTAIN REPAIR TO ROAD AND ROAD FURNITURE UNDER GE AGE BR I GE GURDASPUR

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 Sqm (exc 50 mm deep but not exc.100mm deep) including raking over and the surface and edges to proper required gradient and camber including removing the unserviceable material to a distance not exc 50 metres away and stacking serviceable material for reuse complete all as specified and directed

Material and labour 7.5cm thick (compacted thickness) WBM with coarse aggregates of (Granite, trap or Basalt stone) of grading 2 (63 to 40mm size) granite trap or), spread, rolled an basalt trappedd consolidated to gradient and camber .

Material and labour 7.5cm thick (compacted thickness) WBM with OLD coarse aggregates found from scarifying of grading 2 (63 to 40mm size)or of grading 3 (50 to20mm ) spread, rolled and consolidated to gradient and camber required.

Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and binder content of 4% by weight of total mix using coarse aggregate grading 2 (63mm to 40mm size) rolled with 8 to 12 tonne power road roller complete all as specified and directed. Note : (a) Material for premix bituminous macadam shall be mixed in hot mixing plant. (b) The premix bituminous macadam shall be laid with mechanical paver. (c) The cost of aforesaid is deemed to be included in the quoted rate.

Material and labour for preparing unsurfaced water bound macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen at the rate of 10 kgs per 10 Square metre of road surface, laying rolling consolidating bituminous premixed carpet 40mm thick consolidated thicknesswith 5.50% binder content using paving bitumen VG-30 by weight of total mix ,mixed in hiot mechanical plant rolled and compacted with 8 to 12 tonne power road roller to required gradient and camber complete all as specified and directed. Note:- Material for premixed carpet and seal coat shall be mixed in hot mixing plant and shall be laid with mechanical paver

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer @ 5kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with 5.5% binder content by weight of total mix, rolled and compacted with 8 to 12 Tonne power road roller to required gradient and camber complete all as specified Note : (a) Material for SDAC shall be mixed in hot mixing plant. (b) Mix design of bitumenous SDAC will be got done from approved Lab. (c) The pemix carpet shall be laid with machenical paver.

Material and Labour for marking lines dashes, arrows, letters etc on road pavement and the like of any width with using thermoplastic compound white paint hot applied 2 mm thick including glass with machine confirming to BS3262 and according to the specification laid down IRC & MOST (Ministry of Surface Transport) specification 20011(4th revision) complete all as specified. Note:- Marking shall be carried out with thermostat machine

Repair to pot holes of depth, not exc 30mm area not exc 1.0sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 9.8Kg per 10 Sqm, blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and chipping to uniform surface) depth of pot holes not exc 30mm complete all as specified and directed. Note : (a) Material for premixed bituminous macadam shall be mixed in hot mixing plant.

Repair to pot holes of depth, exc 30mm area not exc 1.0sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 9.8Kg per 10 Sqm, blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and chipping to uniform surface) depth of pot holes not exc 30mm complete all as specified and directed. Note : (a) Material for premixed bituminous macadam shall be mixed in hot mixing plant.

Supply and fixing in replacement for road solar stud size 125x125x25mm made from aluminium alloy and PC construction, solar powered by monocrystel solar panel alongwith high capacity rechargable battery (led - 10mm, 3 pieces each side and total 6 pieces are used for high brightness) water proof confirming to IS-67-1977 having load capacity of 40 tonnes complete all as specified and directed. Make :- Dark Eye Cat Part No DA-110 or equivalent of Makes specified in list of Makes

Supply and fixing in repair road stud colours ABS plastic dynamically design having high impact strength high density and fixed with two numbers reflectors on both side made out of MS pipe 50mm dia and mounted on oval shape metal plate of dimensions of 302x167mm fitted with 02 nos 70x23 mm rectangular reflectors complete all as specified including PCC 1:2:4 for fixing

M&L for moorum /red bajri filling in floors or paving laid in layers n.exc 15 cm t5hick spread levelkled and rammed including watering.

M&L for forming embakments incl raising (or lowering earth spread in layers n.exc 30 cm thick watering ramming /rolling and finishing to required size shape etc 1.5 m high from base.

Rolling and consolidating formation surfaces in cutting for road berms by roller exc 8 ton and n.exc 12 ton complete all as specified and directed

Demolition of concrete in ground floor, paving etc not exc 15 cm thick ( below or above ground level) and complete all as specified.

Material and Labour for cement concrete 1:2:4 type B2 using 40 graded stone aggregate as in surface channels and drains complete all as specified.

Material and Labour for cement concrete type C-2 , 1;3;6 (40mm graded aggregate),100mm thickness average as in sub base, sub floors, floors and pavings including watering and consolidation

Material and labour machine pressed precast concrete interlocking coloured paver Block any shape and size, IS15658-2006 of, 60mm thick ,M-35 grade with grey cement and pigment over and including 25mm thick sand cushion complete all as specified.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick with grey cement and pigment set and jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L preparation of old concrete or plastered surface painting two coats of synthetics enameled paint on surfaces of any description over 10 cm girth or width not other wise descriped complete all as specified and directed.

ss enterprises

GORAYA AND CO

G S TRADERS

TARSAM LAL SAINI CONTRACTOR