Renewal Work of Delhi-Aligarh-Kanpur (Old N.H.-91) Aligarh Shahri Abadi Portion (ODR) in Km-135(640). (By B.C.)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor @ 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as morth specification no 503. (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Bitumen VG-10, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity laying and rolling with a smooth wheeled roller, finished to required level and grades Complete. as morth specification no 510 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor @ 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as morth specification no 503. (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. Ch-5, (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Please Enable Macros to View BoQ information