Carrying out Zone works for period ending 30.06.2027 on Zone No-6 Mech. Workshop including workshop administrative building and store depot Izzatnagar.

Item Breakup - C-N.S-Items.

Hydraulic Excavator of 1 cum bucket.

Tractor with trolley. Total 197296.00

Item Breakup - D-N.S-Items.

Artisan (Blacksmith 2nd class, Carpenter 2nd Day class, Mason 2nd class & Painter Etc.).

Helper (Technician) Total 2553293.00

Item Breakup - E-N.S-Items.

Stone Aggregate (Single size) : 12.5 mm cum nominal size.

Portland Cement (OPC-43 Grade).

Block board construction flush door commercial ply on both faces 30 mm.

Coarse sand (zone III).

Synthetic enamel paint in black or chocolate Litre shade.

Synthetic enamel paint in all shades except Litre black or chocolate shade.

100% Premium acrylic dirt resistance, Silicone Litre additives exterior paint.

Structural steel such as tees, angles channels Quintal and R.S. joists.

Vitreous China pedestal for wash basin.

G.I. Union 15 mm nominal bore.

G.I. Union 20 mm nominal bore.

G.I. Union 25 mm nominal bore.

Polyethylene water storage tank with cover Litre and suitable locking arrangement.

Vitreous China flat back wash basin 550x400 Each mm.

Hydraulic door closer tubular type Aluminum Each section body.

Vitreous China orisha type W.C. pan of size Each 580 mm.

Floor mounted white vitreous China double Each trap symphonic WC with 10-liter cistern and all fittings & fixtures, seat cover etc.

12 mm commercial ply.

Unplasticized P.V.C. connection pipe with brass Each union 45 cm long 15 mm bore.

H.P. or L.P. ball valve with polythene floats: 15 Each mm dia.

H.P. or L.P. ball valve with polythene floats: 20 Each mm dia.

H.P. or L.P. ball valve with polythene floats: 25 Each mm.

C.P. brass waste 32 mm.

C.P. brass waste 40 mm each.

C.P. Brass angle valve 15 mm.

C.P. Brass bibcock 15 mm.

C.P. Brass long nose bibcock 15 mm.

C.P. Brass long body bibcock 15 mm.

Stainless steel butt hinges 125x64x1.9 mm IS: 10 Nos. 12817 marked.

Stainless steel butt hinges 100x58x1.9 mm IS: 10 Nos. 12817 marked.

Stainless steel butt hinges 75x47x1.8 mm IS: 10 Nos. 12817 marked.

Stainless steel kitchen sink - without drain Each board 610x460 mm bowl depth 200 mm.

15 mm PTMT bib cock.

15 mm PTMT bib cock with flange (fancy).

15 mm PTMT bib cock long body with flange.

PTMT pillar cock.

U-PVC pipes (working pressure 4 kg / cm²) Metre Single socketed pipe 75 mm dia.

U-PVC pipes (working pressure 4 kg / cm²) Metre Single socketed pipe 110 mm dia. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

UPVC bend 87.5° 75 mm bend.

UPVC bend 87.5° 110 mm bend.

Semi Rigid PVC waste pipe for sink and wash Each basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings.

Semi Rigid PVC waste pipe for sink and wash Each basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings.

Flexible (coil shaped) PVC waste pipe for sink Each and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings.

Flexible (coil shaped) PVC waste pipe for sink Each and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings.

Flushing Cistern P.V.C. 10 liter capacity (low Each level) (White) (with fittings, accessories and flush pipe)

Galvanized wire mesh of average width of Sqm aperture 1.4 mm and nominal dia of wire 0.63 mm.

8 mm dia C.P. Brass/ S.S. Jet with flexible tube Each up to 1 meter long with S.S. triangular plate for European type W.C.

15 mm dia PTMT stop cock (male thread).

20 mm dia PTMT stop cock.

1.0 mm thick decorative laminated sheet. Total 394116.35

Item Breakup - F-N.S-Items.

Providing and fixing PVC false ceiling tiles of Sqm required size in true horizontal/vertical levels suspended on interlocking MS tube grid of section 25mmx25mmx1.2mm. PVC ceiling tiles should have a section size of 6mmx250mm with wall thickness of 0.8mm. Perimeter edge of tiles shall be covered by extruded PVC corner Beeding of size 9mm x 8mm x1 mm. MS tube section grid should be properly secured with walls and anchored to roof with the help of suitable clamps with complete work.

Supplying, erecting and laying in position 3 Sqm mm thick plain embraced polycarbonate sheets of appd. & transparency on the roof in the profile to match the profile of roofing sheets etc.

Providing hand packed dry flat brick flooring, Sqm class designation 7.5 (FPS Bricks), excluding pointing with joints filled with sand over a bed of dry sand (ordinary) of average thickness 25 mm including ramming sub grade (Flat Brick).

Providing and applying water proofing Sqm treatment to RCC roof slab etc. by application of two coats of cement slurry mixed with water proofing compound (Acrylic based polymer, solid content 30% ± 3, pH >7) in the ratio of 1:2 (1 part of water proofing compound :2 parts of cement by weight), followed by tow coats of single component moisture cured polyurethane based elastomeric water proofing coating conforming to ASTM C-836-89 having tensile strength 3.1 N/mm² . topping layer of 25 mm thick cement concrete 1:2:4 (to be paid separately) to be laid. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Sealing of cracks in roofs by making a V- Metre shaped groove and filling the groove with acrylic-strene based copolymer waterproofing compound.

Supplying & installation of wind driven turbine Each ventilator with FRM base to match profile of aluminum galvanized corrugated (GC) roofing sheets of SVS make or similar of throat/elbow diameter 24'' to be fixed on the roof of the sheds. Installation shall be done in such manner that the roof remains watertight and leak proof.

Supplying, Erecting & fixing in position 150 Metre mm dia PVC Rainwater pipes of appd. Quality wherever required. Complete inside the ways of diesel shed up to 9.0 mtr. height in shut down period complete with all labour.

Brick work with Railway bricks in foundation cum and up to plinth with 1:6 cement mortar (1 cement: 6 Coarse sand).

Brick work with Railway bricks above plinth cum level and up to floor V level in all shapes and size with 1:6 cement mortar (1 cement: 6 Coarse sand).

Supplying, erecting and fixing precast Each concrete reinforced bench with back rest. Bench shall consist of 2 nos. L shaped base support in natural cement colour of thickness 100 mm, back height 1000 mm, front height 450 mm, base width 620 mm and 5 nos. reinforced concrete planks in red colour and size of 1500 x 100 x 50mm and 1 no. reinforced concrete plank of 150 x 200 x 50mm; manufactured by using M-30 grade concrete & reinforced suitably; all parts to be joined with galvanized nuts and bolts of suitable size. All bolts to be sealed after assembly. Complete job to be done as per directions of Engineer In charge.

Supplying polycarbonate sheet LEXAN or similar multiwall etc. complete.

Supply of WEEDICIDE Glyphosate medicine.

Providing Epoxy 5mm thick floor coating by Sqm following procedure (a) scrubbing at surface grinding of surface using electrical grinder and removing of all loose to particle dust. (b) primer coat after through surface prepration providing and applying epoxy primer on the surface p n a one coat epoxy primer (c) epoxy screed : providing and applying epoxy top coat over screed and finishing. 1mm thick

Manufacturing aluminium sheets 0.91 mm thick (Hindalco or similar make) ridges and NL curve of reqd.shape and size as directed by engineer-in -charge at site.

Providing ,fabricating ,fitting & fixing in Sqm position 6 mm thick toughened glass in doors ,window & north lights at all levells including cutting etc. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Providing and fixing permanently colour Sqm coated trapezoidal profiled sheet of depth 28- 30mm at 195- 205mm pitch distance with precisely engineered "Rib & Flute" design. Profiled sheets shall be min. 0.5mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume /galvalume steel sheet (550 mpa yield strength) having a coating of mass of 150gsm zinc aluminium coating AZ- 150 total on both sides as per, AS 1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) / Super Polyester paint coat on exposed surface over a primer coat of 5 microns a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene / EPDM washer on crests of the sheet

Providing & fixing of coloured galvalume plain Metre sheet flashings at ridges / apex junctions of roofing cladding, cover / corner / barge pieces etc. in required shape, colour duly fixed with stitching screws (with EPDM washers etc. as per site requirement) 601mm to 1200 mm width (girth).

Providing 38 mm thick metallic concrete Sqm hardener, flooring metallic cement hardener cosisting of mix 1:2 (one part cement hardener, two parts stone aggregates 6 mm nominal size ) by volume with metalic hardening compound of the approved quality mix in the ratio 1:4(one part metallic of approved quality and four parts cement) by weight including finishing etc. complete(cement will be paid separately )as per direction of Engineer In-charge at site

Providing, fabricating, fitting and fixing in Sqm position 6 mm thick toughened glass in doors, window, clear story window and north lights at all levels including cutting etc.

Supplying and fixing of Nylon fishing net Square aperture 25x25mm of desired shade with all Foot fitings and accessories i/c all material, labour, GST etc. complete as per direction of engineer incharge at site

Supplying fitting and fixing of 12mm toughned Square glass doors and fixed glass including cutting Foot holes, grinding of glass edges and making corner round fixing of glassware make handware knob type

Aluminum Composite Cladding Providing and Sqm fixing aluminum Composite panel shaving total thickness of 4mm (with 0.5mm thick aluminium foil sking on both sides) along with minimum 25 micron PVdF coating on top coil and Polymer/epoxy coating aon back coil (4-7 microns) fixed on aluminium substructure of 50mmx25mmx3mm or 38mmx38mmx4mm (IS grade aluminum extrusion) with stainless stee fastening system Total 2733579.35

Item Breakup - G-N.S-Items.

Drilling of bore well for specified depth in all Metre types of soil and rock mechanically with all contractor's tools, plants, materials and labour up to 75 meters For (150mm dia).

Providing and lowering 110 mm PVC pipe in Metre boring.

Shrouding of tube well bore by pea gravel of cum Lalkuan size 1.5 mm to 4.7 mm including supply of pea gravel.

Development of Tube Well by using 350 PSI Hour compressor.

Development of Tube Well by OP unit of 3 Hour cusec capacity and testing of tube well for yield.

Providing and fixing rectangular counter wash Each basin with 15mm dia CP brass pillar tap of MARC, equivalent make of superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/ architect at site.

Providing and fixing Wall hanging W C Italian Each type with concealed cistern with SS bottom, superior quality, (Hind ware, pair ware etc.) including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/architect at site.

Prov & fixing CP Brass Basin hole mixture Each Hindwaare or similar.

Prov & fixing CP brass WALL MIXER with Each telephonic shower 15mm dia ISI mark, Superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

supplying fitting and fixing of 15mm dia C P Each brass pillar tap long body (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Supplying and fixing C P brass hand faucet Each shower of MARC make or equivalent

Supplying fitting and fixing 15mm dia CP brass Each short body bib cock (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Supplying fitting and fixing 15mm dia CP brass Each longt body bib copck (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Providing and fixing CP brass angle valve Each (ideal orient or equivelent make) complete fitting T & P levies etc.complete as per direction of engineer incharge/architect at site

Supplying and fixing Health faucet jaguar or Each similar make IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Providing and fixing CP brass wash basin mixer Each 15mm dia of ISI mark, superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

Supplying and fixing C P brass Over Head Each shower of MARC make or similar Total 152406.36

Item Breakup - H-N.S-Items.

Removal of trees with roots from the wall.

Operation of all required sluice valves at Each/month workshop izatnagar including supplying valvemen to provide timely water supply in workshop izatnagar in day shift i/c visiting all pump houses to see whether they are runningor not and informing to SSE/W. Visiting Over head tanks to see they are filled full or not, also visitng all times during valve operation in workshop izatnagar to water is being supplied in ws izn and store depot izn and remain all time alert complete with all manpower,T&P,GST taxes etc.(Total 01 person require per day each in day shift) Total 114752.76