Replacement of internal wiring, comprehensive maint of center bldgs and installation bldgs, repair /replacement of LT network, LT UG Cable, panels, LT poles, conductors and misc works at MIRC under GE (S) Ahmednagar

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M & L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.wiring shall be done as per complaints received from user only on reqired basis it is not necessary to do whole wiring of any whole bldg. 3. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 2 above but for one 3 pin socket outlet, 5 Amps on same board with other switches

All as per serial item No. 2 here in before but for one 3 pin socket outlet, 5 Amps on independent board.

All as per serial item No. 2 here in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 2 here in before but for one light point controlled by 2 way switches.

All as per serial item No. 2 herein before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase,Neutral and earth for one 15 Amp, 6 pin socket on independent board.

M & L Point wiring complete on surface conduit concealed type with two runs of 1.5 sqmm for phase and neutral single core multistranded copper conductor cable of 1100 Volts grade PVC insulated and unsheathed , FRLS cable drawn through conduit concealed alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories for one light point or one fan point controlled by one, one way switch all as specified and as directed NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.wiring shall be done as per complaints received from user only on reqired basis it is not necessary to do whole wiring of any whole bldg. 3. All points shall be earthed up to fixtures i.e holdrs,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.4. Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.

All as per serial item No. 8 above but for one 3 pin socket outlet, 5 Amps on same board with other switches

All as per serial item No. 8 here in before but for one 3 pin socket outlet, 5 Amps on independent board.

All as per serial item No. 8 here in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 8 here in before but for one light point controlled by 2 way switches.

All as per serial item No. 8 herein before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase,Neutral and earth for one 15 Amp, 6 pin socket on independent board.

S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F socket outlet, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 5/15 Amps, 230V, AC. all as specified & as directed.

S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F bell push, flush type, 5 Amp, single pole, 230 volts, white finish all as specified & as directed.

S&F switch piano, flush button, 5 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed.

S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 450 watts, suitable for ceiling fan 1200/1400mm sweep all as specified & as directed.

S&F buzzer/ bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F in repairs, batten for single side LED tube light with all accessories with out tube rod made up of rigid MS powder coated sheet of suitable thickness and suitable for LED tube rod of capacity 20 watt prewired. Make :- Havells Cat Part No MAXOLED(BATTEN) LHFXCENNTN1W020 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, LED tube rod of capacity 20 watt LED light source 6500K With uniform light output complete with all accessories . Make :- Havells Cat Part No MAXOLED(TUBE) LHLDDCXCML8Q020 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, LED batten in 20 watt with premium metalic grey finish, along with superior grade diffuser for glare free soothing light with 4 V Surge protection & High Voltage Protection up to 440 with LED light source 6500k with all accessories including its connection with 2 core sheathed copper conductor cable of size 0.5 sqmm complete all as specified and as directed. Make :- HAVELLS LED PRIDE PLUS DECOR Cat No LHEXACP71N1J020 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, ultra slim, square profile, LED lighting fixture with extruded polycorbonate, environmental friendly, energy efficient ready to use pack LED tube light fitting, 9 Watt with LED light source 6500k with uniform light output, with all accessories including its connection with 2 core sheathed copper conductor cable of size 0.5 sqmm all as specified and as directed. Make :- HAVELLS E-LITE LED PRIDE PLUS Cat No LHEXBLP71N!009 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, Lumeno LED Bulb, 10 Watt (Cool day light) having colour temp 6500 K and lumen output 900 suitable for B-22 type to fix on batten holder and wall light etc complete all as specified and as directed. Make :- Havells cat No LHLDEUEEML8R010 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, 6 watt LED, AC 230 volt New innova swivel spotlight, Aesthetically designd lens based accent light for crisp light output complete with all acessories and connections all as specified & as directed. Make :- Havells Professional luminaires Item Code INNOVA NEO ,& LHEEEGBPBFIH1OO6 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, 7 watt surface mounted spot light in matt finish for premium aesthetic, AC 230 volt complete with all accessories and connections all as specified & as directed. Make :- Havells Professional luminaires Item Code INNOVA NEO SURFACE & LHEEEGBPBFH1OO7 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, 600 mm x 600 mm size, recess mounted LED luminaire of capacity 36 watt, with driver, for soft glare free light, AC 230 volt complete with all acessories and connections, complete all as specified & as directed. Make :- Havells Professional luminaires Item Code ENDURASLIMPROPLUS2X2PLR36WLED857MOD for luminaire & LEDDRIVER36V36WS for driver or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, flat panel square fixture, slim, compact, aluminium die cast lit panel , recess mounting 1 x 15 watt, 230 volt with opal diffuser and separate electronic driver, LED light source 6500K with uniform light output, with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings, complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE,Item Code LHEBAEP7IZ1W015 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, flat panel square fixture, slim, compact, aluminium die cast lit panel , recess mounting 1 x 18 watt, 230 volt with opal diffuser and separate electronic driver, LED light source 6500K with uniform light output, with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings, complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE,Item Code LHEBAEP7IZ1W018 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, slim, compact, aluminium die cast lit panel, Recess cum surface mounting 1 x 6 watt, 230 volt LED flat panel square fixture with opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings complete all as specified & as directed. Make :- Havells Cat Part No TRIM CLIPON LED PANEL Item Code LHAABP5IN1W006 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, ultra modern surface mounting luminaire, suitable for amstrong / grid ceiling in MS housing with high brightness LEDs fixture capacity 18 watt LED light source 6500K with uniform light output with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings, complete all as specified & as directed. Make: Havells Cat No TRIM CLIPON LED PANEL SQUARE LHEAABP71N1W018 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, ultra modern surface mounting, 42 watt luminaire, suitable for amstrong / grid ceiling in MS housing with high brightness LEDs fixture size 600 mm x 600 mm x 70 mm, prewired, including connections from ceiling rose to light fittings, complete all as specified & as directed. Make: Havells Cat No PLUTOSURFA CE2X2PLS42W LED857S or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, LED edge lit panel drivers of capacity 4/8 watt with universal connector for easy installations complete with all as specified and as directed. Make :- HAVELLS Cat No OCTANE LED PANEL DRIVERS LSSLNW0168 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, LED edge lit Panel drivers of capacity 15 W/18 W watt with universal connector for easy installations complete with all as specified and as directed. Make :- HAVELLS Cat No OCTANE LED PANEL DRIVERS LSSLNW0170 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, LED edge lit panel drivers of capacity 36/42 W watt with universal connector for easy installations complete with all as specified and as directed. Make :- HAVELLS Cat No LEDDRIVER36V36WS or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, 50 watt LED flood light, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting all as specified and as directed. Make :- Havells, Cat No. LHEXAYP7PN6K050 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, 150 watt, LED flood light, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting all as specified and as directed. Make: LUKER, Cat No. LFLSL150 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Havells

S&F in repairs, security light fitting of building with single piece new generation energy saving and environmental friendly long life LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of Light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of MSFI 4 0 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminim cable all as directed and as specified. Make :Havells Cat No LHEXAYP7PN6K030 or equivalent model of make Philips /Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

M & L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

M & L for sub main wiring with 2 runs of 2.5 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.Three runs of 2.5 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

S&F in repairs, sheet metal enclosures with plug socket, single pole and neutral with two pin and earth plug with one MCB of 20 Amps (SP) complete all as specified and as directed. Make:Havells/Legrand/HPL/INDO ASIAN/ L&T/ Hager/ Siemens/Schneider

S&F in repairs, flexible cable, PVC insulated, twin core with copper conductor of size 24/0.2 mm all as specified and as directed.

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed. Make: Havells cat no DHMGBSPF006-32 or equivalent model of make Legrand/ L&T/Hager/ Siemens/ HPL/ABB/ Schneider/GE/C&S Electricals Ltd./Indo Asian

S&F in repairs, MCB SPN, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed. Make: Havells cat no DHMGBSNF006-32 or equivalent model of make Legrand/ L&T/Hager/ Siemens/ HPL/ABB/ Schneider/GE/C&S Electricals Ltd./Indo Asian

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. Make:Havells,Cat No:DHDMSH0DDW08 or equivalent model of make Legrand/ L&T/Hager/ Siemens/ HPL/ABB/ Schneider/GE/C&S Electricals Ltd./Indo Asian

S&F in repairs, sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) triple pole and neutral 415 volts 4 way protection class IP-42,suitabl for fixing MCBs,Isolators etc,confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 100 Amps rated copper busbar,with Neutral bar,Earthbar and cable alley for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed.Make:Havells,Cat No:DHDMTH0DDW04 or equivalent model of make Legrand/ L&T/Hager/ Siemens/ HPL/ABB/ Schneider/GE/C&S Electricals Ltd./Indo Asian

S&F in repairs ISOLATOR TPN, AC 415 V, 63 amps, 10 KA capacity ,'C' series, making connection with suitabl size of copper lugs etc complete all as specified and as directed. Make:Havells/Legrand/HPL/INDO ASIAN/ L&T/ Hager/ Siemens/Schneider

S&F AC single phase static energy meter of accuracy class 1.0, rating 5-30 Amp, 240 V, 50 Hz only Kwh compact meter with plifer proof meter box with dealing screw provision including taking down existing energy meter and depositing to MES store yard all as specified and as directed.

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

Excavation in trenches not exc 1.5m wide and not exc 1.5 m in depth for foundation of pole, laying of cable etc for shafts, wells, cespits, manholes, pier holes,etc.not exc 10 sqmm on plain and not exc 1.5m in depth and getting out in soft/loose soil all as specfied and as directed..

All as per serial item No 54 but depth exc. 1.5 mtr and not exc. 3 mtrs.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specfied and as directed.

Removing excavated surplus soil to distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point all as specfied and as directed.

Supply and lay HDPE PIPE (PE 100,SDR-21, 6 Kgf/Sqcm) IS 4984-2016) 50 mm dia for laying of LT cables etc complete with all accessories all as specified and as directed. .

Supply and lay HDPE PIPE (PE 100,SDR-21, 6 Kgf/Sqcm) IS 4984-2016) 63 mm dia for laying of LT cables etc complete with all accessories all as specified and as directed. .

Supply and lay HDPE PIPE (PE 100,SDR-21, 6 Kgf/Sqcm) IS 4984-2016) 110 mm dia for laying of LT cables etc complete with all accessories all as specified and as directed. .

Taking out existing 300 Sqmm, 3.5 core, underground LT XLPE armoured cable from trenches or pole or underground in pipe/duct carefully alongwith protection covers, cleaning of the same and relaying in trenches or pole or through pipe, Jointing and testing complete all as specified and as directed. Note :- Excavation and earthwork shall be measured and paid separately.

All as per serial item No 61 but 240 Sqmm, 3.5 core

All as per serial item No 61 but 185 Sqmm, 3.5 core

All as per serial item No 61 but 150 Sqmm, 3.5 core

All as per serial item No 61 but 120 Sqmm, 3.5 core

All as per serial item No 61 but 95 Sqmm, 3.5 core

All as per serial item No 61 but 70 Sqmm, 3.5 core

All as per serial item No 61 but 50 Sqmm, 3.5 core

All as per serial item No 61 but 35 Sqmm, 3.5 core / 4 core

All as per serial item No 61 but 25 Sqmm, 3.5 core / 4 core

All as per serial item No 61 but 16 Sqmm, 4 core

All as per serial item No 61 but 10 Sqmm 2 core

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable of size 185 sqmm, 3.5 core with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall sheathed including cable gland, lugs, jointing material etc and jointing, connecting, testing and commissioning including taking out existing cable alongwith protection covers complete all as specified and as directed.

All as per serial item No 73 but 120 Sqmm, 3.5 core

All as per serial item No 73 but 95 Sqmm, 3.5 core

All as per serial item No 73 but 70 Sqmm, 3.5 core

All as per serial item No 73 but 50 Sqmm, 3.5 core

All as per serial item No 73 but 35 Sqmm, 3.5 core

All as per serial item No 73 but 25 Sqmm, 3.5 core

All as per serial item No 73 but 16 Sqmm, 4 core

All as per serial item No 73 but 10 Sqmm, 2 core

S&F in repairs 80mm bore dia galvanised steel tube, light grade for protection of cable including necessary fittings all as specified and as directed.

All as per serial item No 82 but 50 mm bore dia

All as per serial item No 82 but 40 mm bore dia

M&L in repairs for straight through cable jointing kit, heat shrinkable for 1.1 KV grade, 10 to 16 Sqmm, 4 core, XLPE cable with jointing material and accessories and testing after jointing all as specified and as directed.

All as per serial item No 85 but 25 to 50 sqmm, 3.5 core

All as per serial item No 85 but 70 to 120 sqmm, 3.5 core

All as per serial item No 85 but 150 to 185 sqmm, 3.5 core

All as per serial item No 85 but 240 to 300 sqmm, 3.5 core

M&L in repairs for end termination cable jointing kit, heat shrinkable for 1.1 KV grade, 10 to 16 Sqmm, 4 core, XLPE cable with jointing material and accessories and testing after jointing all as specified and as directed.

All as per serial item No 90 but 25 to 50 sqmm, 3.5 core

All as per serial item No 90 but 70 to 120 sqmm, 3.5 core

All as per serial item No 90 but 150 to 185 sqmm, 3.5 core

All as per serial item No 90 but 240 to 300 sqmm, 3.5 core

M&L for drilling hole under road for laying of underground cable through pipe of suitable size complete all as specified and directed at site.

Supply install in repairs/replacement and testing out door wheather proof bus bar chamber of size 80 cm x 30cm x 25cm made out of 18 SWG MS sheet having one side openable hinged door shutter with locking arrangement and provision of two nos 80cm long 40mm x 40mm x 6mm angle iron legs welded and embedded in and including PCC 1:3:6, type C2, foundation, and 04 Nos copper bus bar of 400Amp rating, provision of one MCCB, TPN, 125 Amp, 16 KA for controlling electric supply complete errected on ground, bus bar chamber painted with two coats of approved synthetic enamel paint over one coat of primer including making cable connection with necessary gland , lugs/thimbles all as specified and as directed. NOTE: Cost of dismantling/ taking down old unserviceable bus bar chamber and PCC foundation shall be included in the quotedd rate of this item.

S&F in repairs/replacement of steel tubular swaged pole complete with mild steel box plate, 6 mm thick of size 300 x 300 mm, finial taper plug, pole cap, bolts, nuts, washers & screws as specified, type 410- SP-31 (9 m long), made out of ERW mild steel tubing confirming to IS-2713 Part II including drilling holes of required size for fixing cross arms etc erected in true vertical position including painting the pole with two coats of aluminium paint over a coat of red oxide primer on exposed pole surfaces and two coats of black bituminoius paint for portion embedded in concrete including painting three black/red/ bands at lower portion of pole of 1.5 m height at 300 mm spacing, painting pole No with black paint at suitable height including demolition of foundation concrete and coping complete all as specified and as directed.

M&L for PCC 1:3:6, type C2, using 40 mm graded stone aggregates as in foundation of pole/stays all as specified and as directed.

M&L for PCC 1:2:4, type B2, using 40 mm graded stone aggregates as in coping of pole and similar work etc including necessary formwork and finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for stay assembly, comprising of 16 mm dia stay rod, 1800 mm long, loop type insulator of size 65 mm x 90 mm, galvanised stay plate 6 mm thick of size 250 x 250 mm and stay bow including dismantling and taking out existing old stay assembly complete all as specified and directed & as shown in Electrical Plate No. 1 of SSR Pt I. Note : Excavation/, earth work and PCC shall be measured and paid seperately.

Dismantling of GI cradle/earthwire/stay strand complete all as specified and as directed.

M&L for galvanised stay strand 7/3.15 mm complete all as specified and as directed.

S&F in repairs, galvanised iron continuous earth wire, 4mm dia for cradle/guarding, connecting properly to cross arms hook etc with and including 22 SWG binding wire all as specified and as directed.

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI or steel earth strip 25 mm x 4 mm, by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 32mm dia GI pipe, light grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

Labour and fault detector machine required for locating fault in underground LT cable, 1100 volts by using fault detector machine including transportation and by carring out high pressure test all as directed by Engr-in-charge.

Disconnecting of electric supply from over head line and removing existing binding wire and unservicible ACSR conductor and restringing of ACSR conductor including binding of conductor on insulator with new binding wire & reconnecting the electric supply complete all as directed by Engr-in-charge.

S&F in repairs, line separators for two conductors of over head lines all as specified and as directed.

S&F in repairs, line separators for three conductors of over head lines all as specified and as directed.

S&F in repairs, line separators for four conductors of over head lines all as specified and as directed.

S&F cross arms, bracings, support channel, back plate hooks etc fabricated from structural steel, sections (MS Channel) of required size and shape including nuts, bolts,washers, welding, bending , cutting cold or hot, drilling holes for inserting bolts as indicated and directed including painting with one coat of red oxide primer and two coats of silver aluminium paint including dismantling existing cross arms, MS Channel or angle section complete all as specified and as directed.

S&F pin type porcelain vitreous brown/white insulator with approved make including one galvanised MS spindle two GI Washers and GI nut of size 100 mm height and 65 mm dia 1100 Volt grade including taking out old unserviceable insulator complete all as directed

S&F shackle type porcelain vitreous brown/white insulator with approved make including galvanised MS strip washers, insulated bolts, washers nut, size 75 mm height 90 mm dia for 1100 volt grade including taking out of old unserviceable insulator complete all as directed.

M&L for aluminium conductor steel reinforced (ACSR), any size, (Weasel/Ferret/Squirrel as required) including stringing, binding, jointing, jumpering etc on insulators or on poles with minimum sag complete including dismantling ACSR conductor from LT/HT pole all as specified and as directed.

M&L for preparation of surfaces of LT pole by scrapping damaged paint and painting with two coats of silver aluminium paint and alternate painted strip of 30 cm width of colour as approved by Accepting officer upto 1.5 meter height from bottom of the pole and writing pole No with black paint on yellow circuit all as directed by Engineer-in-Charge.

Trimming of tree branches touching to the LT/HT over head line or near to the LT/HT over head line as per the direction of AGE E/M/JE incharge complete including removing the tree branches from site complete all as specified and directed. Note : (i) Written shut down shall be obtained from concerned JE/AGE (E/M) before taking the trimming work in hand by contractor. (ii) Span from one pole to next pole (30 to 50 RM) will be considered as a one Job (iii) Any damage caused due to negligence of workmen will be rectified without any extra payment (iv) T & P such as ladder, rope, cutter, Axes and other related material will be provided by the contractor.

Cleaning of bushes /small plants/grass up to root level aruound and surrounding area of E/M installations (i.e two pole / four pole structures,out door substation yards & misc E/M installations etc) including surface dressing n.exc 15 cm deep and removing debris to distance n.exc 50m complete all as specified and directed by Engr-in-charge.

M&L for disconnecting burnt LT cable from MCCB/Main switch/OH Line etc and cleaning the bus bar and removing carbon and rusted nut bolts etc complete and reconnecting the LT cable after replacement of aluminium lugs, glands etc all as specified and as directed for LT under ground cables 16 sqmm, 3.5 core

All as per serial item No 117 but for LT under ground cables 25 sqmm 3.5 core

All as per serial item No 117 but for LT under ground cables 35 sqmm 3.5 core

All as per serial item No 117 but for LT under ground cables 50 sqmm 3.5 core

All as per serial item No 117 but for LT under ground cables 70 sqmm 3.5 core

All as per serial item No 117 but for LT under ground cables 95 sqmm 3.5 core

All as per serial item No 117 but for LT under ground cables 120 sqmm 3.5 core

All as per serial item No 117 but for LT under ground cables 150 sqmm 3.5 core

M&L for repairs to LT panel boards, size upto 1.20 m x 1.20 m x 0.45 m with necessary welding works to doors, replacement of unserviceable hinges and al-drop bolt complete and painting with one coat of synthetic enamel paint of approved color internally and externally all as specified and as directed.

M&L for taking out old unserviceable MCCB TP/TPN from existing LT panel board and supply and fix MCCB TP 63 amps capacity rupturing capacity 16 KA at 415 volt 50 Hz AC, including necessary modification in panel board if required to fix the MCCB complete with replacement of incoming and out going cable connection with lugs, aluminium conductor cable of proper size, nuts bolts, replacement of burnt lugs and wire/cable pieces etc as required at site and as directed.

All as per serial Item No 126 but MCCB, TP 100 amps capacity, rupturing capacity 25 KA.

All as per serial Item No 126 but MCCB, TP 160 amps capacity rupturing capacity 36 KA.

All as per serial Item No 126 but MCCB, TP 200 amps capacity rupturing capacity 36 KA.

All as per serial Item No 126 but MCCB, TP 400 amps capacity rupturing capacity 36 KA.

S&F in repairs, MCB TPN 100 Amps 10 KA 415V 10KA 'C' curve miniature circuit breaker (MCB) in the DB complete with connection testing and commissioning all as specified and as directed.

All as per serial Item No 131 but MCB TPN 63 Amps 10 KA

All as per serial Item No 131 but MCB TPN 40 Amps 10 KA

S&F in repairs, change over switch, 63Amps, 4 pole, 415 V housed in sheet metal enclosure including replacement of incoming and outgoing cable connections with aluminium conductor cable, lugs, nuts, bolts all as specified and as directed.

S&F in repairs, change over switch, 100Amps, 4 pole, 415 V housed in sheet metal enclosure including replacement of incoming and outgoing cable connections with aluminium conductor cable, lugs, nuts, bolts all as specified and as directed.

Supply, install, testing and commissioning factory made and tested (including CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted, compartmantalised and IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 400 amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of 50x50x6mm angle iron , powder coated, Front and rear opening type with aprons for cable entry with double door shutter and locking arrangement with and including dismantling/ taking down old unserviceable LT feeder piller box , comprises of following. Incoming (a) MCCB 200 amps, 4 pole, 36 KA, 415 volts - 01 No (b) Bus bar electrolytic grade copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 400 Amp, 4 pole, not less than 45 cm long mounted on insulators for incomming supply 01 No. (c) Digital Ammeter & Voltmeters-01 set (d) Neon indicating lamps (R, Y & B) -01` Set. Outgoing (a) MCCB 100 amps, 4 pole, 25 KA, 415 volts grade - 01 No (b) MCB TPN 63 amps, 4 pole, 10 KA , 415 volts, 50 Hz - 04 No. (c) MCB SPN 40 amps, 10 KA , 415 volts, 50 Hz - 01 No.

AZAD SERVICES

ASHWAMEDH ENGINEERS

BHAVIN INFRA

metro electrical services

Ms. S.K. ASSOCIATES