Repair work of Bage Barrage under water Resorces Sub Division Ashta under Water Resources Division Sehore

Repair work of Bage Barrage under water Resorces Sub Division Ashta under Water Resources Division Sehore.

Excavation in all kind of soft/loose/ hard/dense soils, moorum & moorum mixed with boulders and mud including dressing, placing the excavated soil neatly in specified dump area or disposing off the same as directed, including cost of site clearance, all materials, machinery, labour and dressing etc. Complete Including all lead and lift and as per direction of engineer in charge.

Earthwork for embankment (hearting/ casing) using selected soil from approved borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour and dressing, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting to achieve maximum dry density using sheep foot roller/vibratory compactors etc. Complete Including all lead and lift and as per direction of engineer in charge.

Providing and laying M-20 grade Plain Cement Concrete design mix using graded aggregate, clean, hard including cost of all materials, machinery, labour, formwork, centring, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing, packing joints of shuttering etc. Complete. Using aggregate of maximum size. Including all lead and lift and as per direction of engineer in charge.

22 cm thick dry stone pitching without quarry spall with individual stone of 22 cm depth and minimum size 0.014 cum complete Including all lead and lift and as per direction of engineer in charge.

Providing, Laying and Jointing non- pressure(NP3) RCC socket & spigot pipes with rubber gasket joint/ joint caulked with cement mortar 1:2 including testing of joints. [Conforming to IS ; 458-1988, IS 783:1985) etc. complete Including all lead and lift and as per direction of engineer in charge.

Design, Drawing, fabrication, supply, erection, testing and commissioning of Vent liners (steel liners for sluice/tunnel or as per requirement in Dam/irrigation system) including Embedded parts consisting of Liner plates ,anchors, stiffeners, girders, fasteners etc. and any required necessary item , with all accessories for all type Gates/sluice channels/any section of water resources projects including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, tools and tackles, applying two coat of zinc rich epoxy primer to give dry film thickness of 70± 5 microns and finish coat(two coats)of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150± 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., including packing & forwarding, transportation charges complete, as per specifications and approved drawings Including all lead and lift and as per direction of engineer in charge.