REPLACEMENT OF LT OH ELECT LINES WITH UG CABLE (3 PH) AT CQA(SV) OFFICE COMPLEX, PROVN OF STANDBY POWER SUPPLY FOR SECURITY LIGHT AT STN SPORTS COMPLEX NEAR SWIMMING POOL AND PROVN OF ELECT CHIMENY IN KITCHEN AT KLP OF CERTAIN UNIT UNDER GE DEHU ROAD

Amount

Job No : 32/2076/2024-25 : Replacement of low transmission overhead (LT OH) electrical lines with underground cable (03 Phase) at CQA (SV) office complex under GE Dehu Road

Dismentling / Taking down old Aluminium conductor steel rainforced any type and size.

Dismentling / Taking down old insulator any type and size for 1100 volts grade.

Dismentling / Taking down of Cross arms of MS channels or angle section complete.

Dismentling of old stay assembly complete.

Supply & Laying in repair cable XLPE insulated PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter of following sizes:- Make :- Polycab/ Gloster, KEI

10 Sqmm x 4 Core

25 Sqmm x 4 Core

35 Sqmm x 3.5 Core

70 Sqmm x 3.5 Core

95 Sqmm x 3.5 Core

120 Sqmm x 3.5 Core

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out Soft / loose all as specified and directed :-

Excavation in trenches for errection of poles etc.,n. exc 1.5m wide, exc 1.5m and n. exc 3.0m in depth and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M & L in repair HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

All as per item no 10 here in before but size of cable 50 mm dia

All as per item no 10 here in before but size of cable 80 mm dia

M& L for GI tubing 50 mm dia light grade for cable protection

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

Supply and fix bus bar chamber of size 600 x 450 x 300 mm, outdoor type pedestal mounted dust proof, weather proof, vermin proof front side top hinged double door type with locking arrangement rear side single door hinge type with locking arrangement, sheet steel cubical type with slanting roof made out of 3.15 mm thick CRCA sheet with powder coated finished suitable length and size and MS angles to fix bus bar chamber with ground clearance of 45 cm. High conductivity 3 phase and neutral Aluminium bus bar of 200 Amps capacity duly mounted on pre-cast insulators, arrangement for four outputs bus bar (holes in bus bar for connection) including installed of MCCB of capacity 100 Amp, 16 KA for switch on / off LT supply all as directed by Engr-in-Charge.

M & L in repairs for earthing with galvanised steel earth plate electrode 60cmx60cmx6.3mm burried directly in ground earth pit not less than 2.25 m deep below normal ground level with top edge of the plate vertically to depth of not less than 1.2m below ground level connected to and including GI strip of size 25 x 4 mm as earthing lead welded with earth electrode (excluding GI protection pipe) and connecting to equipments by means of earthing lead connecting to equipments by means of GI bolts & nuts etc. with provision of char-coal and salt etc. all as per electrical plate No. 3 of SSR Part I, 2009 including RCC cover and MS angle iron frame watering arrangement with GI pipe 20mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete all as specified and directed by Engr-in-Charge.Note: Rate quoted deemed to be including excavation by compressor M/C for Soft disintegrated rock to required depth.

Supply instal testing and commissioning of CPRI approved factory make LT panel board , outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.15 mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral copper bus bar of 400 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items Incoming:- (a) 250 amp change over switch -01 nos (b) MCCB 250 amps 4 pole 25 KA thermal & magnetic release - 1 Nos. (c) Advanced Multi functional meter 4420 series LCD meter C1 with RS 481 MAKE :- CAT No WC442011OOOO of L&/Seimens/Schiender (d) LED type indication lamp for RYB. Outgoing: (a) MCCB 125 amps 4 pole 16 KA thermal & magnetic release- 03 Nos. (b) MCCB 63 amps 4 pole 16 KA thermal & magnetic release - 01 Nos. (c) two blank space for MCCB

Supply instal testing and commissioning of CPRI approved factory make LT panel board , outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.15mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral copper bus bar of 500 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items Incoming:- (a) 320 amp change over switch -01 nos (b) MCCB 320 amps 4 pole 25 KA thermal & magnetic release- 1 Nos. (c) Advanced Multi functional meter 4420 series LCD meter C1 with RS 481 MAKE :- CAT No WC442011OOOO of L&/Seimens/Schiender (d) LED type indication lamp for RYB. Outgoing: (a) MCCB 160 amps 4 pole 16 KA thermal & magnetic release - 03 Nos. (b) MCCB 63 amps 4 pole 16 KA thermal & magnetic release - 01 Nos. (c) two blank space for MCCB

Job No : SHQ/DEHU/MINOR/2024-25/06 : Provn of standby power supply for security light at station sports complex near swimming pool under GE Dehu Road

Supply and installation of silent Diesel Engine driven generating set 25 KVA Water Cooled producing 42 BHP @ 1500 RPM with 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 4722BS EN 60034-1 complete with relay panel and switch gears for automatic starting on main failure Logic Panel and SMPS battery charger having meter and sound proof canopy as per CPCB IV+ norms and foundation etc. mounted on a Base Frame. Along with:- (a) AMF-AType Control Panel (b) Fuel tank (c ) Battery with leads (d) First fill of oil (e) Engine safeties & protections (f) Anti vibration mounting pads (g) Acoustic Enclosure suitable for 25 kVA DG Set. Latest CPCB IV + Norms.of capacity upto 25 KVA. Make: Engine:- Kirloskar, Cummins, Ashok Leyland. Alternator: Stamford,Kirloskar, Ashok leyland Engine: Four Cylinders Inline, Liquid Cooled, Turbocharged and Developing 42 hp @ 1500 RPM. Diesel Engines are with Electric Start, Compression Ignition, 4 Stroke Cycle ,Designed to run continuously at 1500 RPM . It confirms to IS 10002, ISO-3046, BS 5514 standards. Alternator: Alternator, suitable for continuous duty operations rated at 1500 RPM 415 V, 0.8 PF, 50Hz, 3Ph. in SPDP Enclosure, Self- Excited & Self- regulated, Brush less, ‘H’ class Insulation, Floor mounted with anti frication Shielded Ball Bearing on end. The alternator conforms to IS: 4722, BS EN 60034-1 suitable for tropical conditions.

OTHER ACCESSORIES: (i)Radiator with Fan. (ii)Fuel Injection Equipments with Mechanical Governor. (iii) Dry type Air Cleaner. (iv) Exhaust Silencer. (v) Lube Oil filter (Spin On Type. (vi) Fuel Oil filter (Spin On Type). (vii) 12V Electric starting system. (viii)Battery charging alternator. (viii) Stop Solenoid. (ix) Cylinder Head temperature Gauge. (x)Battery Voltage. (xi) First Fill Lube Oil. BASE FRAME:- Suitable to couple above Engine & Alternator made from steel sheet metal. FUEL TANK : 8 Hrs Capacity for continuous running, with Diesel fuel Inlet & Outlet, Air Vent & Drain plug arrangements. BATTERY:-1 No.12 V Battery with Leads STANDARD GENSET CONTROLLER UNIT WITH CONTROL PANEL: Controller unit with totally enclosed, Steel Construction Control Panel suitable for indoor floor / wall mounting installation having following safeties and display parameters. ACOUSTIC ENCLOSURE: (i)The Enclosure is modular in construction. (ii) Base Frame is made of Sheet metal. (iii) Durable industrial locking system is provided on Doors. (iv) Door Gaskets are made in high quality EPDM material.

Job No : LV-5 (S)/LBW/01/UNIT LV-2 (S)/2025-26 : Provision of elecrtrical chimeny in kitchen at KLP of certain unit under GE Dehu Road

M&L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 2.5sqmm copper conductor FRLS PVC casing caping and surface/concealed PVC Conduit & accessories having ISI mark to be fixed with proper screws/ (MS steel strips if required ) including all accessories/ fittings/ junction boxes /inspection covers etc including hard PVC board of required size fixed with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches fan regulators etc including 2.5 sqmm (22/0.30mm) 1100 V grade PVC insulated, unsheathed flexible muliti stranded copper conductor FRLS cable as continuous earthwire connected to metallic bodies of luminaries/fans etc. at one end and to common earth duly at other end for.

All as per item No 18 above but with 2.5 sqmm (36/0.3mm) FRLS cable for one socket 5 pin 15Amps flush type on independent board with including earthwire complete.

S & F Switch socket combination flush type multi purpose 5A/16A, 5 in 1controlled by one switch 230V.

S & F ceiling rose surface PVC 50 mm dia three terminals including PVC mounting block, white/lvoury /Urea finish.

S & F MCB SPN 32 amps, 240Volts 10KA

Material and labour for Sub-main wiring complete with 2x4 sqmm single core PVC insulated but unsheathed multistranded copper conductor cable 1100 V grade drawn through concealed PVC conduit with wall thickness not less than 1.8 mm incl sunken type pressed steel terminal boxes including 4 sqmm single core PVC insulated but unsheathed copper conductor grade 1100 V grade cable as earth continuity wire complete all as specified. (two run 4 sqmm and one run 4 sqmm) (Make : Finolex/Anchor/Polycab)

S & F Electrical Chimney making S.S. Hood 202 Sheet, Highland hood size : 3.5/10 Running feet, hight 10 inches

S & F S.S. Filters

Supply, fabrication, installation and testing factory made GI Ducting for Commercial Kitchen Exhaust Air System 24 Gauge 0.6 mm thickness Jindal make sheet 120 / 80 GSM complete with MS supporting and hardware etc.

Supply, installation, testing and commissioning of 3 HP, 1440 Exhaust Fan for commercial Kitchen Exhaust Air System 3 Phase 1 Year Motor Warranty as specified and directed air system with Heavy Duty Starter for 3 HP Motor.

N D ELECTRICAL (BID ID -3371237)

Shri Sai Electricals (BID ID -3381348)

S.M.Sales Corporation (BID ID -3379046)

PREETI ENTERPRISES (BID ID -3374095)