C.O Type I quarter 4 Nos for HPPWD employees at Bhoranj Distt Hamirpur SH C.O building portion water supply sanitary installation septic tank and site development including boundary wall

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5m (One point five meter) in width or 10 sqm (Ten square meeter) on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m ( one point five meter), including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m (Fifty meter) Ordinary Rock as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases for columns

Suspended floors, roofs, landings, balconies and access platform

Columns, piers, abutments, pillars, posts and struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Edges of slab and break in floors and walls under 20cm wide

Stairs, (excluding landings) except spiralstaircases

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:5:10 (one cement : five coarse sand: ten graded stone aggregate) 40mm ( Forty millimeter) nominal size all work upto plinth level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:3:6 (One cement : three coarse sand: six graded stone agg 20mm ( Twenty millimeter) nominal size graded stone aggregate 40 mm (Forty millimeter) nominal size foundation and plinth as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:2:4 (One cement : two coarse sand : four graded stone aggregate 20 mm (Twenty millimeter) nominal size) All work up to plinth level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:4:8 (One cement : four coarse sand: eight graded stone agg 40mm (Forty millimeter) nominal size graded stone aggregate 40 mm (Forty millimeter) nominal size) all works upto plinth level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:3:6 (One cement : three coarse sand : six graded stone aggreegate) 20mm (Twenty millimeter) nominal size graded stone aggregate 40 mm (Forty millimeter) nominal size All work up to plinth level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 ( One cement : two coarse sand: four graded stone aggregate 12.5 mm (Twelve point five millimeter) nominal size as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg/sqm (One point seven killogram per square metre) on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete, 20 mm (Twenty millimeter) nominal size Design mix M-20 (M-twenty) in Foundation footings bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement design mix M-20 (M-twenty) 20 mm nominal size Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of Reinforced cement concrete work design mix M-20 (M-twenty)20 mm (Twenty millimeter) nominal size in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel reinforcement(Tata Tiscon/sail make) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing up to floor five level precast cement concrete 1:1½:3 (One Cement: One point five coarse sand : three graded stone aggregate 20 mm (Twenty millimeter) nominal size.solid block, including hoisting and setting in position with cement mortar 1:3 (one cement : three coarse sand), cost of required centering, shuttering complete as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying autoclaved aerated cement blocks masonry with 150mm (One hundred fifty millimeter)/230mm (Rupees two hundred thirty millimeter)/300 mm (Three hundred millimeter) thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete Upto floor two level as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying autoclaved aerated cement blocks masonry with 100 mm (One hundred millimeter) thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (One cement : four coarse sand ). The rate includes providing and placing in position 2 Nos (Two number) 6 mm (six number) dia M.S. bars at every third course of masonry work Upto floor two level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing cup board shutters 25 mm (Twenty five millimeter) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked,of Action tesa,Black cobra,Green ply,Kit ply make exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm(Twenty five millimeter) wide x12 mm (Twelve millimeter) thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,of Action tesa,Black cobra,Green ply,Kit ply make in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).18mm thick as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12mm thick commercial ply conforming to IS: 1328 BWR type ofAction tesa,Black cobra,Green ply,Kit ply make plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm (Eighteen point five millimeter) fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. grills of (Tata/sailmade) required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC rigid foam sheet 1 mm (One millimeter) thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

300×16mm (Three hundred into sixteen millimeter)

250×16mm (Two hundred fifty point sixteen millimeter)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

200x10mm (Two hundred into ten millimeter)

150x10mm ( One hundred fifty into ten millimeter)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

125mm (One hundred twenty five millimeter)

100mm (One hundred millimeter)

Providing and fixing 40 mm (Forty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimeter) bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complet as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished brass hard drawn hooks and eyes :150mm (One hundred fifty millimeter) as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm ( One point twenty five millimeter) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25mm (Twenty five millimeter) dia as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing 40x5 mm (Forty into five millimeter) flat iron hold fast 40 cm (Forty centimeter) long including fixing to frame with 10 mm (Including ten millimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimeter) 1:3:6 mix ( One cement : three coarse sand : six graded stone aggregate 20mm (Twenty millimeter) nominal size as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone slab flooring over 20 mm (Twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement : four coarse sand) :25mm (Twenty five millimeter) thick Upto floor six level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete Upto floor six as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black,Cherry Red, Elite Brown, Cat Eye or equivalent. up to floor six as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for pre finished nosing to treads of steps of marble stone. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of Khazaria,Nitco,Rak of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc.floor two level to floor three level complete as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying vitrified floor tiles in 600x600 mm (Six hundred into six hundred millimeter ) sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight percent) and conforming to IS: 15622, of Khazaria,Nitco,Rakof approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three pont three Killogram per square meter) including grouting the joints with white cement and matching pigments etc., completeSize of Tile 600x600 mm (Six hundred into six hundred millimeter) Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Vitrified tiles in 600x600mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of Khazaria,Nitco,Rakof approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve millimeter) thick bed of cement mortar 1:3 (One cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three killogram per square meter) including grouting the joint with white cement & matching pigments etc Upto floor four level complete tile 600x600mm (Six hundred into six hundred millimeter) size as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (Twelve millimeter) thick bed of cement Mortar 1:3 (One cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg/sqm (Three point three killogram per square meter) including pointing in white cement mixed with pigment of matching shade complete Floor two level to floor three level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cement concrete flooring 1:2:4 (One cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm (Forty millimeter) thick with 20 mm (Forty Millimeter) nominal size stone aggregate Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (One cement : Three coarse sand), finished with a floating coat of neat cement.18mm thick Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for providing and fixingglass strips in joints of terrazzo floors.40 mm (Forty millimeter) wide and 4 mm (Four millimeter) thick. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised iron profile sheets(Tata/Sail) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.600 mm (Zero point six hundred millimeter) (+ 0.05 %) (plus zero point zero five percent) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre (Twelve meter) or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) (Five point five into fifty five millimeter) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet (Tata/Sail)roofing accessories 0.50 mm ( zero point fifty millimeter) (+0.05 %) (Plus zero point zero five percent) total coated thickness, Zinc coating 120 grams (One hundred twenty gramas) per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Ridges plain (500 - 600mm) (Five hundred to six hundred millimeter)

Cutter (600 mm over all grith) (Six hundred millimeter)

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty into fifty into fifty millimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (One cement : four coarse sand) and making good the wall etc. complete.110mm (One hundred ten millimeter) dia of D-plast or Vectus make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimeter) gap for thermal expansion, (i) Single socketed pipes.110mm (One hundred ten millimeter) diaD-plast or Vectus make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.D-plast or Vectus make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Plain bend 110mm dia (One hundred ten millimeter)

Shoe (Plain) 110mm dia (One hundred ten millimeter)

Coupler 110mm dia (One hundred ten millimeter)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel (Tata/Sail)work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm (Fifteen into three millimeter) lugs 10 cm (Ten centimeter) long embedded in cement concrete block 15x10x10 cm (Fifteen into ten into ten centimeter) of C.C. 1:3:6 (One Cement : three coarse sand : six graded stone aggregate 20mm (Twenty millimeter) nominal size). as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel(Tataor Sail) round holding down bolts with nuts and washer plates complete. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing MS tube hand rail(Tataor Sail) of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety leter per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (Zero point seventy five leter per ten square meter) of approved brand and manufacture as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm (Six millimeter) plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make Upto floor four level . as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen millimeter) cement plaster on rough side of single or halfbrick wall of mix 1:6 ( One cement : Six sand) Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20 mm (Twenty millimeter) cement plaster of mix1:6 ( One cement : six sand) Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including water thinnable priming coat with cement primer as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20 mm (Twenty millimeter) cement plaster of mix1:6 ( One cement : Six sand). Upto floor four level as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm (One point six seven leter per ten square meter) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (Two point twenty killogram per ten square meter) as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making plinth protection 50mm (Fifty millimeter) thick of cement concrete 1:3:6 (One cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (Twenty millimeter) nominal size) over 75mm (Seventy five millimeter) thick bed of dry brick ballast 40 mm (Forty millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoo as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished brass helical door spring (superior quality as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing Float glass panes of nominal thickness 4mm (four millimeter) (weight not less than 10kg/sqm (Ten killogram per square meter) glass panes with puty and nails i/c removal o broken glass panes where ever necessry as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing in cast iron cover with frame for man holes 455x610mm (Four hundred fifty five into six hundred ten millimeter) rectangular C I cover light duty weight not less than 23kg (twenty three kilogramme) as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm (Twenty into twenty into ten centimeter) cement concrete blocks 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (Twenty millimeter) nominal size) as per standard designWith 20x20 mm (twenty into twenty millimeter) square bar as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( One cement : Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twnety millimeter) nominal size), foundation concrete 1:4:8 mix (One cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimeter) nominal size), inside plastering 12 mm (Twelve millimeter) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (Twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimeter) and 45 cm (Forty five centimeter) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight killogram) (weight of cover 23 kg (Twenty three killogram) and weight of frame 15 kg ( Fifteen killogram )With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: in cement mortar 1:6 ( One cement : Six sand) in foundation and plinth as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : in cement mortar 1:4 (One cement : four sand) in super structure as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre (Ten litre) low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid European pan EWC CAT no 20012 size 81x50x80cms (Eighty one into fifty into eighty) with sleek plus dual cistern having dual flush systeam of Cera/Hindware/Jaquar in white shade as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimeter) dia C.P. brass single hole basin mixer of approved quality and make , including painting of fittings and brackets, cutting and making good the walls wherever require d White Vitreous China Wash basin Standard category No 10001 size 550x400x830mm (Five hundred fifty into four hundred into eight hundred thirty millimeter) with a 15 mm (Fifteen millimeter) CP Brass single hole basin mixerof Hindware or Cera make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32mm (Thirty two millimeter) diaof Hindware or Cera make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm (Six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeof Jaquar,Hindware or Cera make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour600 mm (Sixty millimeter) long towel rail with total length of645 mm, width 78 mm and effective height of 88 mm (Eighty millimeter), weighing not less than 190 gms ( one hundred ninety grams)of Jaquar, Hindware or Cera make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x120x5 mm ( Six hundred into one hundred twenty into five millimeter )glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete.of Jaquar,Hindware or Cera make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixingCP soap Dish Holder having length of 138mm (One hundred thirty eight millimeter), breadth 102mm (One hundred two), height of 75mm (Seventy five millimeter) with concealed fitting arrangements, weighing not less than 106 gms (One hundred six grams). Of ,Jal, Jaquar,Hindware Make.or its equivalent as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15mm (Fifty millimeter) nominal boreOf continental series ,Jal, Jaquar,Hindware Make.or its equivalent as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams). 15mm (Fifteen millimeter) dia. Of continental series,Jal, Jaquar,Hindware Make.or its equivalent as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm (Fifteen millimeter). nominal dia as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm (Fifteen millimeter) nominal bore as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P Brass toilet paper holder of Jal, Jaquar,Hindware Make.or its equivalent as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm (Forty five centimeter) length 15mm (Fifteen millimeter) nominal bore Cera/Jaguar Finolex or hindware Make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixinggun metal gate valve with C I wheel of approved quality (screwed end) Zindal /Tata make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

20 mm (Twenty millimeter) nominal bore

25 mm (Twenty five millimeter) nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete15mm (Fifteen millimeter) sizeZindal /Tata make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ferrule with CP mouth cover including boring and taping the main 15mm (Fifteen millimeter) nominal bore. Tata/zindal make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making connection of G I distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee i/c cutting and threading the pipes complete as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap classSP-1 complete with C.I. grating brick masonry chamberwith water tight C.I. cover with frame of 300 x300 mm (Three hundred into three hundred millimeter)size (inside) the weight of cover to be not less than 4.50kg (Four hundred fifty killogram) and frame to be not less than 2.70 Kg (two hundred seventy killogram) as perstandard design square mouth trap 100m x100mm (One hundred meter into one hundred millimeter) size P-typeWith common burnt clay F.P.S. (nonmodular) bricks of class designation 7 as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Zindal /Tata make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (Fifteen millimeter) nominal size

20mm (Twenty millimeter) nominal size

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Sintex make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 meter (One Meter)long with S.S. triangular plate to Eureopean type W.C. of quality and make of Jal, Jaquar,Hindware Make.or its equivalent as as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimeter)gap for thermal expansion, (i) Single socketed pipes as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75mm (Seventy five) nominal size

Providing and fixing UPVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, Supreme/finolex/Kitch make including cost of cutting and making good the walls and floors, floor trap 100 mm (One hundred millimeter) inlet and 100 mm (One hundred millimeter) outlet as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimeter) gap for thermal expansion Single tee with door as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Single tee with door75x75x75mm (Seventy five into seventy five into seventy five millimeter)

Single tee with door110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimeter)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimeter) gap for thermal expansion Single tee with outdoor as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Single tee with outdoor75x75x75mm (Seventy five into seventy five into seventy five millimeter)

Single tee without door110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimeter)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimeter) gap for thermal expansion.D-plast or Vectus make 75mm bend (Bend 87.5*) as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty into fifty into fifty millimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75mm (Seventy five millimeter) nominal size

110mm (One hundred ten millimeter) nominal size

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (Forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever requiredKitchen sink without drainREK 1916 of over all size 610x510 mm (Six hundred ten into five hundred ten millimeter) bowl depth 200 of Diamond make as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m (One point five meter), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (Twenty centimeter) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m (Fifty meter)Pipes, cables etc. exceeding 80 mm (Eighty millimeter) dia. but not exceeding 300 mm (Three hundred millimeter)dia as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Ambika Bhawani Constructions