Loading
Loading…
Loading…
Tender Value
₹4.8 Cr
EMD Value
₹9.7 L
Closing Date
3 Jul 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GEN
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: In case tender value Rs. 50 lakhs or more, The tenderer must have minimum average annual contractual turnover of V/N or 'V" whichever is less; where V= Advertised value of the tender in crores of Rupees= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VI B, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
1.For participating in tenders for an electrical nature of work, the contractor shall have to possess valid electrical license of appropriate voltage issued by any State Government under Clause 45 of Compilation of Rule of Indian Electricity Rules 1956 or as amended from time to time. Electrical works of 11 KV and above including OHE, 'A' class Electrical Contractor license is essential. 2.The license can be possessed with one of the partners or in his own name, if sole proprietor. Firm should submit a self-attested copy of the Electrical Contractor License along with the offer; otherwise the offer will be summarily rejected.
Eligibility Criteria means any contract which have satisfactorily executed & completed by the tenderer, which are mentioned as below as similar nature of works. As regards the similar works, the tenderer should have satisfactorily executed Work of 1.Electrification of Service building. 2.Electrification of Staff quarters. 3.Electrification of offices. 4.Electrification of road and colony lighting 5.Electrification of circulating area lighting 6.Erection and commissioning of LT, HT up to 33 KV overhead lines. 7.Substation installation and commissioning. 8.Electrification of washing pit, sheds & workshops etc. 9.Comprehensive/semi comprehensive maintenance of service building or staff quarters or sub stations or DG set or lifts. 10.Annual electrical maintenance contract of train lighting and/or air conditioning coaches excluding RMPU units of AC coaches. 11.Any above work or combination of (1) to (10) above. Tenderers should submit documentary proof in regards to fulfilling these eligibility criteria along with their offer. In case of any ambiguity, the decision of Chief Electrical Engineer in regards to classification of work will be final.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. IN case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
19 conditions · 1 needing a document upload
Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per latest GST Law. Contractor has to submit GSTN registration and PAN card.
Conditions regarding inclusion of "Letter of credit" as mode of payment attached as Annexure LC". As per Railway Board Letter No. 2018/CE-I/CT/9 dt. 04.06.2018, special condition of LC has been applied. The contractor shall have the option to take payment from Railway through a letter of credit (LC) arrangement, for all the tender having advertise cost of Rs. 10 Lakh or above.
The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter during execution of contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Latest GCC has been introduced and published / available on railway's website. The provisions of GCC will be applicable on all tenders published here after. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC, while execution of work.
Contractor is to abide by the provisions of Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract ( copy uploaded and attached with this tender). In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. And upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration/ updation of Portal shall be done as par clause 55 C (i) of Indian Railways General Condition of Contract.
While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____ Month, _____Year."
Part(A):Bhopal division - Improvement of illumination of platform and other electrical work at different stations. Part(B):Electrical work of CBT hall on first floor of CBT building at ATC premises. Part(C):Provision of distributed EI in lieu of existing RRI along with provision of MSDAC in parallel with DC track circuits at Rani Kamlapati station (Electrical Work). Part(D):Ganjbasoda-Upgradation of second entry & leftover work of main Circulating area at PF no 1 side under Amrit Station Scheme (Electrical Work).
ELECT-GEN-BPL-T-16-2026
ELECT-GEN-BPL-T-16-2026
Open
Works - General
6 Months
Bhopal, Madhya Pradesh
₹0
₹9.7 L
3 Jul 2026
11 Jun 2026
19 Jun 2026
308 items across 4 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,09,79,771.63 | ||
| — | Item Breakup for | details. | — | ||
| Supply, erection, connection, testing and commissioning of light points with casing caping wiring with modular switch socket board(included), PVC pipe complete with all necessary accessories as per wiring specification attached. The wiring shall be carried out with copper conductor of 1100Vgrade size 1.5 sq.mm - 4 sq.mm & 2.5 mm green colour earth wire for the following point - Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, LEGRAND or equivalent:- | — | — | — | 19,04,606.88 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing & commissioning of 2.5 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 42,900 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing & commissioning of 4.0 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 3,51,844.5 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing & commissioning of 6.0 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 16,43,264 | |
| — | 10400.00 | — | — | ||
| Supply, fixing, testing & commissioning of 10.0 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 12,97,920 | |
| — | 100.00 | — | — | ||
| Supply, fixing, connection, testing & commissioning of AC power point by separate wiring with 4 sq.mm copper wire and MS pipe, 20A metal clad and 16A SP MCB complete in all respect as per railway technical specification attached. (For Geyser/AC unit/Others). Make: For wire- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For switch socket with MCB - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,60,728 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing & commissioning of casing capping 32 mm x 20mm for submain/ main wiring with all accessories as per specification attached. Make: POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 3,49,258 | |
| — | Item Breakup for | details. | — | ||
| "Supply, installation, connecting, testing and commissioning of 20 Watts Indoor LED tube complete with other accessories such as clamps, bracket, square block etc. as per railway specification attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent." | — | — | — | 1,53,298.89 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, fixing, wiring, connecting, testing, and commissioning of 45 watt outdoor type LED Streetlight fitting of IP66 rating complete with suitable MS clamps, nut - bolts, anchor fasteners etc. as per technical specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 29,89,005 | |
| — | Item Breakup for | details. | — | ||
| "Supply, installation, connecting, testing and commissioning of outdoor type 70 W LED flood light with high pressure die cast aluminum housing with PC IP66 rating complete with suitable MS clamps, nut-bolts, anchor fasteners etc as per railway specification attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent" | — | — | — | 14,59,718.7 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing and commissioning of outdoor type 100W LED flood light fitting complete with suitable MS clamps, nut-bolt, anchor fastners etc as per site requirement and as per technical specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 3,47,985 | |
| — | Item Breakup for | details. | — | ||
| "Supply, erection, connection, testing and commissioning of 160W LED flood light fitting IP66 rating, The Luminaires casing/housing shall be Spun Aluminum/Die Cast Aluminum with higher thermal conductivity with toughned glass, complete in all respect. It also includes supply of suitable fixing arrangements for fixing the LED fitting as per technical specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent." | — | — | — | 4,95,660 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning of 20 Watts outdoor INVERTER LED (EMERGENCY LED) Batten tube complete with other accessories such as clamps, bracket, square block etc. as per technical specifications attached. Make- PHILIPS, Jaquar, WIPRO, Osram or equivalent. | — | — | — | 1,74,613.92 | |
| — | Item Breakup for | details. | — | ||
| "Supply, erection, fixing, connecting, testing & commissioning of ENERGY EFFICIENT ceiling fan(Brushless Direct Current ( BLDC) motor type Ceiling Fan 1400 millimeter) complete with blades and electronic module regulator on the ceiling making connections by 23/.20 mm flexible copper wire from ceiling rose to fan and fixing the fan regulator on switch boards with 1.5 feet long down rod as per technical specifications attached. Make- BAJAJ, ORIENT, USHA or equivale " | — | — | — | 6,12,392.7 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing testing &commissioning of modular type BLDC ceiling fan regulator as per technical specification attached. | — | — | — | 43,753 | |
| — | 100.00 | — | — | ||
| Supply and erection of MS fan hook clamp along with nut bolt as per Railway technical specification attached. (Note:- Before starting the work, the sample should be got approved by the Railways) | — | — | — | 11,729 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing, commissioning of 380 mm sweep all Metal body construction industrial type heavy duty 4 pole single phase exhaust fan, propeller type, single phase, 1400 RPM complete with all standard accessories including civil works of opening in the wall and finishing the same after work, as per the manufacturer as per specification attached. Make-BAJAJ, ORIENT, USHA or equivalent. | — | — | — | 1,40,668.5 | |
| — | Item Breakup for | details. | — | ||
| "Supply of material and erection of Octagonal galvanized steel pole of 5 mtr height on cement concrete foundation complete with foundation bolts, single arm etc. with GI spiral earthing as per specification attached. Make - BAJAJ,PHILIPS, CROMPTON or equivalent." | — | — | — | 38,19,998.4 | |
| — | Item Breakup for | details. | — | ||
| "Supply of material and erection of Octagonal galvanized steel pole of 5 mtr height on cement concrete foundation complete with foundation bolts, Double arm etc. with GI spiral earthing as per specification attached. Make - BAJAJ,PHILIPS, CROMPTON or equivalent." | — | — | — | 21,48,837.6 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of RSJ pole of 175x85mm of (19.6 kg/mtr.) & 9 mtrs. with earth coil for overhead line complete with muffing & cement concrete foundation. (Note:- Before starting the work, the sample should be got approved by the Railways) | — | — | — | 1,70,224.7 | |
| — | Item Breakup for | details. | — | ||
| "Supply, installation, connecting, testing and commissioning of complete material for installation and erection of High mast tower 16 mtrs. height (12 Nos. of 160W/150W LED fitting), complete with foundation, head frame, carriage lantern along with light fitting, power tool, control panel etc. along with 2 nos. neon aviation light as per technical specifications attached. Make- BAJAJ,PHILIPS, CROMPTON or equivalent." | — | — | — | 8,63,147.64 | |
| — | Item Breakup for | details. | — | ||
| Erection , Stringing , connecting, testing and commissioning of LTOH line of 5 ACSR, 2 Nos. 8 SWG GI Wire, cradle guard etc. to be fixed on cross-arms provided on poles. The spacing of cross cradle guards wires should not be more than 3 Mts with erection of pole in truly vertical position with re-fixing of existing MS channel cross-arms and with supply of pin insulators on straight runs and shackle insulators at ends, MS clamps, washers, nut-bolts etc. (Each span shall be approximately 45 meter long) | — | — | — | 24,837.6 | |
| — | Item Breakup for | details. | — | ||
| Supply, Installation, Connecting, Testing and commissioning of stay set of 20 mm complete with all accessories for pole /pole structure. | — | — | — | 5,755.83 | |
| — | 2000.00 | — | — | ||
| Supply of Aluminium Conductor SAAC/AAAC/ACSR-IS:398 (Q3) DG-80 ACSR | — | — | — | 1,04,560 | |
| — | Item Breakup for | details. | — | ||
| "Supply, erection, testing &commissioning of 24 V SMPS based Float Cum Boost Charger (Battery Chargers)for 24 Volts, 150 AH with all accessories and internal wiring as per technical specification attached. Make: AMAR RAJA,SIGNOTRON, EXIDE or equivalent." | — | — | — | 1,94,332.2 | |
| — | 12.00 | — | — | ||
| Supply, erection, testing &commissioning of 12 V, 150AH capacity tubler lead acid heavy duty battery with Battery Trolley as per technical specification attached. Make: AMAR RAJA, Microtek, Luminous, EXIDE or equivalent. | — | — | — | 3,29,863.92 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning GI pipe earthing arrangement complete as-per specification attached with earth pit and connection strip. (GI PIPE Make: Tata, Jindal, Surya or equivalent) | — | — | — | 9,71,468 | |
| — | Item Breakup for | details. | — | ||
| "Supply, erection, connection, testing and commissioning of 8 SWG GI wire as per technical specification attached." | — | — | — | 86,510 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning of digital timer switch 16A capacity, complete with associated accessories & enclosure. Make-HAGER, L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 2,03,141.6 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation , testing and commissioning of 3 pole power contactor type of suitable capacity as per timer above. Make-HAGER, L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 3,01,420 | |
| — | Item Breakup for | details. | — | ||
| Laying, erection, connection and testing of PVC Aluminium armoured cable in the following manner and as per railways scope of work. (Cable will be supplied by Railway at concerned depot.) | — | — | — | 28,47,562 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying & fixing of DWC/HDPE pipe of 110/120mm dia along with all required material for joining the pipes, as per specification attached. (Note:- Before starting the work, the sample should be got approved by the Railways.) | — | — | — | 61,13,136 | |
| — | 200.00 | — | — | ||
| "Supply and fixing of heavy duty HDPE Pipe 160 MM for provision of Cables in pipe as per technical specification attached. (Note:- Before starting the work, the sample should be got approved by the Railways.)" | — | — | — | 1,68,702 | |
| — | 16800.00 | — | — | ||
| Laying of cable inside the GI pipe/HDPE/DWC pipe | — | — | — | 7,06,776 | |
| — | 200.00 | — | — | ||
| Cable laying by horizontal boring below track etc by pushing method-Drilling for horizontal bore below track by pushing method by suitable means for laying of GI pipes/ pipe etc of various sizes, the bore shall be of 200 mm dia & shall be done at a depth of1200 mm from ground level, it also includes ins erection of pipe. | — | — | — | 5,48,462 | |
| — | Item Breakup for | details. | — | ||
| Supply of material and digging of trench in concrete area 30cms deep and 30cms wide and laying of pipe or cable. The Contractor has to replaster the surface/floor with cement concrete etc. (All the material will be supplied by the contractor) as per specification attached. | — | — | — | 20,32,160 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, erection, connecting, testing and commissioning of PVC pole junction box IP-65 should be fitted with 1 nos. 16A SP MCB on din channel with 4 nos. 35sqmm feed through PVC terminal in grey colour. Complete with 02 nos. MS flat clamps with with each box for fixing on electrical pole. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 35,077.5 | |
| — | Item Breakup for | details. | — | ||
| Supply, Installation, Testing and Commissioning of Cable Junction Box of size 200 mm x160 mm x98 mm made of thermoplastic halogen free and weather proof for outdoor installation Degree of Protection IP65/IP66 with metric knockouts for cable entry with 5 Nos. terminal block set for cable of size 16/25 Sq.mm, bracket and cable glands complete in all respect. Note-The complete work shall be done to the full satisfaction of the Railways. Make-Hager, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 1,38,084.5 | |
| — | Item Breakup for | details. | — | ||
| "Supply and fixing of perforated cable trays of GI sheet of 150 mm width & 50 mm height along with suitable cover. The work includes the supply of perforated cable tray of GI having dimensions150X50X1.6 mm along with GI sheet cover to fix on the cable tray of reputed make. The thickness of the cable tray should be of 1.6mm and 1.2mm for cable tray cover. The cable tray should be fixed upon the wall/pillar/gantries etc. and similar other places with proper clamps, fixtures etc. as-per railway requirement. Make -POLYCAB,FINOLEX, SHREENATH,PRESS FIT or equivalent." | — | — | — | 2,17,800 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, fixing, connecting, testing & commissioning of Cable trunking system 50mm*50mm complete as per railway requirement. Make- POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 3,64,680 | |
| — | 5.00 | — | — | ||
| Supply, Installation, fixing & Commissioning of 250/320A ON LOAD CHANGEOVER SWITCH as per railway specification. Make: L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 90,978 | |
| — | Item Breakup for | details. | — | ||
| Supply , fixing, testing & commissioning of 12 ways double door single phase SDB comprising 1x32 ATPN C series MCB as incoming and 8x16 A SP C series MCBs as outgoing, as per technical specifications attached. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 5,41,466.25 | |
| — | 28.00 | — | — | ||
| Supply, Installation, Connecting , Testing and commissioning of Three Phase, Double Door, 12- Way, Vertical Distribution Board in Powder coated MS encloser complete with detachable gland plates , bus bar, earth bar, neutral link 1x63 A FP MCCB as incoming and 12x32 A TP MCBs as outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 6,63,600 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, connecting, testing and commissioning of outdoor type LT panel with 1X100A FP MCCB 25KA as incomer,4X63A TP MCCB, 3x40A TPMCB & 4X16A SP MCB along with CT operated Energy Meter, meters for voltage, current, frequency, PF, 3phase indicating lamps LED cluster type for phase indication, copper bus bars, insulation sheet, neutral link connectors, copper bus bar etc. enclosed in MS sheet enclosure. It also includes the proper fixing of the panel on MS Channel with suitable fixtures, clamps, nut & bolts, etc. as per technical specification attached. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 4,19,516.7 | |
| — | Item Breakup for | details. | — | ||
| Design, Fabrication ,supply of complete material for fabrication, erection, testing, commissioning and fixing of LT panel/ MDB asper Rly technical data -Design, Supply, Installation, Connection, Testing and commissioning of Outdoor type LT panel complete with all connected accessories etc. The LT panel with 1 X 200 A FPMCCB as incomer, 2X100A TPMCCB, 4x63A TP MCCB , along with CT operated Energy Meter, meters for voltage, current, frequency, PF , 3 phase indicating lamps LED cluster type for phase indication, copper bus bars, insulation sheet , neutral link connectors, copper bus bar etc. enclosed in MS sheet enclosure per railway specification attached. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 3,25,156.04 | |
| — | 1.00 | — | — | ||
| Supply, Installation, Connecting Testing and commissioning of outdoor type MDB LT panel hut shaped canopy type front opening double door type consisting with 1x400A TPN MCCB 50KA as incomer, 3x250A TPN MCCB, 3x200A TPN MCCB, 3x100A TPN MCCB, 2x63A TPN MCB, 2x32A TPN MCB as outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,98,800 | |
| — | 2.00 | — | — | ||
| Supply, installation, Connecting Testing and commissioning outdoor type MDB LT panel hut shaped canopy type front opening double door type consisting with 1x250A TPN MCCB 25KA as incomer, 2x200A TPN MCCB, 3x100A TPN MCCB, 2x63A TPN MCCB, 3x32A TPN MCB, 6x16A SP MCB as outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 2,43,500 | |
| — | 2.00 | — | — | ||
| Supply, Installation, Connecting Testing and commissioning outdoor type MDB LT panel hut shaped canopy type front opening double door type with 1x160A TPN MCCB 25KA as incomer, 2x100A TPN MCCB, 2x63A TPN MCCB, 3x32A TPN MCB as outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,36,000 | |
| — | 1.00 | — | — | ||
| Supply, Installation, Connecting Testing and commissioning outdoor type MDB LT panel hut shaped canopy type front opening double door type consisting with 1x320A TPN MCCB 50KA as incomer, 3x100A TPN MCCB, 3x63A TPN MCB, 4x32A TPN MCB, 6x20A DN MCB as outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,02,000 | |
| — | 3.00 | — | — | ||
| Supply, Installation, Connecting Testing and commissioning outdoor type MDB LT panel hut shaped canopy type front opening double door type consisting with 1x250A TPN MCCB 25KA as incomer, 3x100A TPN MCCB, 3x63A TPN MCCB, 2x32A TPN MCB, 6x20A SP MCB as outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 2,13,000 | |
| — | Item Breakup for | details. | — | ||
| SDB in MS enclosure complete with double door, detachable gland plates, busbar earth bar, neutral link to accommodate 1X 32/40 Amps DP MCB as incoming, 6 X 10 A SP MCB for outgoing. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 2,03,904 | |
| — | 1.00 | — | — | ||
| Design, Fabrication , supply, Installation, fixing & Commissioning of Indoor LT panel / MDB with Changeover 400 Amps, 2x400 Amps MCCB as incomer, 6 X250 Amps MCCB ,4 X160 Amps MCCB 4X100 Amps, MCCB 6X32 Amps MCB, 4X16A MCB, , and 1x 16 Amps MCBs for out going along with insulation sheet, neutral link connectors, din rail copper busbar , RYB indicators etc as per Railway Specifications in MS sheet enclosure. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 3,77,000 | |
| — | 150.00 | — | — | ||
| Supply, fixing, connection, testing &commissioning of 1Phase 25 Amp DP RCCB 30 mA breaking capacity, as per Railway's technical specifications attached. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,65,211.5 | |
| — | 18.00 | — | — | ||
| Design, Supply, Installation, Connecting, Testing and commissioning of Outdoor Type LT panel complete with all connected accessories with 2X63A FP, MCCB as incomer, 4x20A TPN MCB, 1No. Multifunction Emf is Meter with CT to read voltage, current, frequency, PF & kwh, 3 phase 3 Nos. indicating lamps LED cluster type for phase indication, ML232ATP Contactor with 2Nos. digital timer, Copper busbars, insulation sheet, neutral link connectors. It also includes the proper fixing of the panel on Brick Masonry Foundation, Ms Channel, nut & bolts, etc. Make:- L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 9,55,440 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, connecting, testing and commissioning of 2x18W fly catcher suitable for operation on 230 volts AC approx. size 24.5"x8"x17", size 3 mm thick MS flat clamps, nut bolts etc. on Railway platform under covered shed structure and connecting by means of PVC insulated flexible copper conductor to be drawn in 1/2" dia. flexible PVC conduit which shall be suitably supported from overhead conductors. | — | — | — | 1,77,331.5 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection, connecting, testing and commissioning Chain Electric Hoist, Load Capacity 3000 kilogram as per technical specifications attached. Make- LOADMATE or Equivalent. | — | — | — | 2,42,550 | |
| — | Item Breakup for | details. | — | ||
| — | 10.00 | — | — | ||
| — | 10.00 | — | — | ||
| — | — | — | 44,900 | ||
| — | 10.00 | — | — | ||
| — | — | — | 30,030 | ||
| — | 1.00 | — | — | ||
| — | — | — | 1,59,753 | ||
| — | 7.00 | — | — | ||
| "Provision of Online UPS of Rating 2.0 KVA With Battery Of Backup Time 120 Minutes complete is all aspect. Make:- For UPS - Microtek, Luminous, Vertiv or equivalent, Battery- Microtek, Luminous, EXIDE or equivalent." | — | — | — | 5,00,500 | |
| — | 7.00 | — | — | ||
| Dismantling of old existing electrical panels & transportation to depot. | — | — | — | 13,547.45 | |
| — | — | — | 16,52,852.38 | ||
| — | Item Breakup for | details. | — | ||
| Supply, erection, installation, connection, testing and commissioning of Concealed type point wiring with copper wire, PVC conduit pipe and flush metal box with plate inner and outer, modular switch, sockets, regulator, board plate, wire, pipe, etc. complete, wiring in PVC pipe 25 mm dia (medium) 1.6 mm to 1.8 mm thickness approx. with 1.5sq mm to4.0 sqmm PVC insulated single core multistrand copper cable confirming to IS:694- 1990 or latest with one holder/ceiling rose on junction box with round plate with 2.5 sq mm PVC insulated copper wire green color for earthing along with connection etc. as per wiring specification attached. Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, PRESS FIT or equivalent. | — | — | — | 4,51,689.3 | |
| — | 20.00 | — | — | ||
| Supply, fixing, connection, testing & commissioning of AC power point by separate wiring with 4 sq.mm copper wire and MS pipe, 20A metal clad and 16A SP MCB complete in all respect as per railway technical specification attached. (For Geyser/AC unit/Others ). Make: For wire- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For switch socket with MCB - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent | — | — | — | 32,145.6 | |
| — | Item Breakup for | details. | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC 2022
ATTACHMENT
GCCAmendments1to10.pdf
ATTACHMENT
GCCamendmentcorrectionslip11.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureLC.pdf
ATTACHMENT
WCRLEDSpecificationsforLEDlights.pdf WCR LED Specification
ATTACHMENT
RB200824GOI190724.pdf
ATTACHMENT
TechnicalSpecification-Final.pdf
ATTACHMENT
SpecialConditions.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
WCRLEDSpecificationsforLEDlights.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .