Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC | ₹25.7 L Quoted ₹25.9 L | L1 | Accepted-AOC Being Lowest |
| 2 | L2₹27.4 L+₹1.5 L (5.79%)Rejected-Finance 10 WARD NO 18 PLOT NO 34 KAMDENU FURNTIURE SIKAR RAJASTHAN 332025 | SIKAR | RAJASTHAN | 332025 | ₹27.4 L+₹1.5 L (5.79%) | L2 | Rejected-Finance Being other than lowest |
| 3 | L3₹29.4 L+₹3.5 L (13.4%)Rejected-Finance | ₹29.4 L+₹3.5 L (13.4%) | L3 | Rejected-Finance Being other than lowest |
| 4 | L4₹31.6 L+₹5.7 L (21.8%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | ₹31.6 L+₹5.7 L (21.8%) | L4 | Rejected-Finance Being other than lowest |
| 5 | L5₹35.3 L+₹9.3 L (35.9%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 IP EXTN PARPARGANJ DELHI 110092 | EAST | DELHI | 110092 | ₹35.3 L+₹9.3 L (35.9%) | L5 | Rejected-Finance Being other than lowest |
| Sl No | Description | Qty | Unit | Saini Enterprises L5 | SANJEEV ENTERPRISES L4 | sheetal engineering L1 | Ruchi enterprises L2 | R R Associates L6 | SARVJEET ENTERPRISES L7 | J V ENGINEERS / JAI SINGH L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L in replacement for Earthing complete with galvanised steel pipe electrode ,40 mm bore, medium grade, 2.5 meter length, burid directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected with galvanised iron 32x6 mm strip all as shown in plate No.2 to the earthing test point all as specified and indicated including testing and completion all as specified and as directed | 50 | Each Job | 4,500 ₹2,25,000 | 4,000 ₹2,00,000 | 5,000 ₹2,50,000 | 6,900 ₹3,45,000 | 4,500 ₹2,25,000 | 1,490 ₹74,500 Lowest | 8,699 ₹4,34,950 |
| 2.00 | M&L in replacement for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick , burid directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected with galvanised iron 32x6 mm strip all as shown in electrical plate No.3 connected to the earthing test point all as specified or indicated including testing and completion complete all as specified and as directed. | 40 | Each Job | 3,000 ₹1,20,000 Lowest | 4,000 ₹1,60,000 | 5,000 ₹2,00,000 | 6,200 ₹2,48,000 | 4,500 ₹1,80,000 | 4,900 ₹1,96,000 | 3,699 ₹1,47,960 |
| 3.00 | M&L in replacement for Earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15 mm thick , burid directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected with copper strip 20x3 mm copper strip all as shown in electrical plate No.3 connected to the earthing test point all as specified or indicated including testing and completion complete all as specified and as directed. | 10 | Each Job | 14,000 ₹1,40,000 | 14,000 ₹1,40,000 | 13,999 ₹1,39,990 Lowest | 16,000 ₹1,60,000 | 42,000 ₹4,20,000 | 23,490 ₹2,34,900 | 19,555 ₹1,95,550 |
| 4.00 | S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthing etc as 32x6 mm galvanised iron strip complete all as specified and as directed. | 400 | RM | 150 ₹60,000 | 180 ₹72,000 | 130 ₹52,000 Lowest | 200 ₹80,000 | 300 ₹1,20,000 | 159 ₹63,600 | 195 ₹78,000 |
| 5.00 | M&L copper plate Chemical Earthing complete with copper earth plate eletrode 90cm x 60cm and 5mm thick, burried directly in ground surrounded with adequate quantity of bentonite or grafite based material to assure proper earth conductivity all round the plate with using 50x6 mm strip as earth wire electrode welded and revetted to earth plate at one end connected to the directed area incl construction of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as sas specified and as directed. | 50 | Each Job | 23,000 ₹11,50,000 | 26,400 ₹13,20,000 | 25,000 ₹12,50,000 | 17,000 ₹8,50,000 | 16,500 ₹8,25,000 Lowest | 48,990 ₹24,49,500 | 31,255 ₹15,62,750 |
| 6.00 | Supply and Erection of FRP Fencing of height 1800 mm above Ground Level around distribution transformers covering fencing Area of (5 meter x 5 meter) at various locations under BHDC in conformity to relevant IS and ASTM standards with necessary civil works all as specified and as directed. The Fencing will comprise of one gate including locking arrangement complete in all aspect comprising following description complete all as specified and as directed | 15 | Each Job | 1,17,000 ₹17,55,000 | 80,000 ₹12,00,000 | 30,000 ₹4,50,000 Lowest | 55,000 ₹8,25,000 | 1,00,000 ₹15,00,000 | 69,000 ₹10,35,000 | 31,555 ₹4,73,325 |
| 6.01Vertical Posts: The vertical post shall be made out of FRP Pultruded hollow box section of size 50x50x5mm. Such posts shall be kept at a distance not exceeding 1000 mm c/c and at the corners, gates. This sections shall be grouted in the ground with M20 grade concrete. The vertical posts shall be supplied with predrilled holes so as to accept Sub frame provided using hollow FRP sub sections 50x25x5 mm or FRP angles 50x50x5 at top and bottom and other accessories for fixing of gates etc. The length of vertical post shall be sufficient to take care of grouting, depth i.e. underground and height of fencing above the ground. There shall be brick wall foundation of 350 mm as shown in drawings and the total height of the structure shall not be less than 1800 mm. Horizontal Rails: Rails shall be made out of FRP notch bars of 12 mm dia. provided at not less than (70-90) mm centre to centre. The rails are placed horizontally as well as gap between the rails shall be maintained as specified. Vertical Sections: Vertical sections shall be made of I-section of size 38x15x3.6 mm FRP provided at equal spacing not exceeding 100 mm centre to centre mechanically locked between vertical section as shown in the drawing. The sections shall be pre-drilled to facilitate fixing on the rails. Dimensions of the sections utilized, length of those sections, gate openings, corner posts and the perimeter as well as shape of area to be covered by fence shall be as per the drawing and shall be as mutually agreed between the Engg-in-charge and Contractor by way of issue of approved drawing. The fencing Material of Construction (MoC) shall conform to the relevant IS and ASTM as applicable. | ||||||||||
| 6.02Sub Frame Sections: The sub frame of the fencing shall be of FRP Pultruded hollow rectangular box section of size 50x25x 5 mm. NOTE:- 1. At the top, the whole fencing shall be tied with FRP Section to provide suitable stiffness. The whole fencing shall be stiffened using ss bolts to provide suitable stiffness. 2. Hardware for fixing/ assembling shall be of stainless steel or FRP or any other approved type. 3. Gate must be suitable stiffened to prevent sagging. Hinges shall be heavy duty S.S and facilitate outward 180degree movement of the gate flaps. S.S Al-drop of size not less than 16mm dia. and 350 mm long shall be provide. (i) Foundation Work: Concrete of 1:1.5:3 (M20) proportion of size 100 x 100 mm upto a depth of 300 mm for erection of box section. (ii) Brick Work: 350mm thick brick wall below GL and one brick thick wall above GL. Provision of adequate drainage shall be maintained in the brick work (iii) Plastering work: 15 mm thick plastering work on both sides of brickwork in proportion 1:4. | ||||||||||
| 7.00 | M&L for cutting and removing grass, vegetation bushes etc from surrounding HT Substation / Transformer Yard levelling of soil surface by man power and removing all rubbish to a distance not exceeding 50 m all as specified and as directed. | 25 | Each Job | 50 ₹1,250 | 100 ₹2,500 | 500 ₹12,500 | 1,200 ₹30,000 | 1,000 ₹25,000 | 900 ₹22,500 | 25 ₹625 Lowest |
| 8.00 | Supplying and laying of rounded gravels of size 40mm transformer yards laid to a minimum thickness of 150 mm complete all as specified and as directed. | 85 | Cum | 850 ₹72,250 | 700 ₹59,500 | 2,700 ₹2,29,500 | 2,350 ₹1,99,750 | 2,500 ₹2,12,500 | 1,390 ₹1,18,150 | 455 ₹38,675 Lowest |
Tender Value
₹39.7 L
EMD Value
₹79,360
Closing Date
30 Sept 2025, 6:00 pmClosed
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR/ REPLACEMENT TO CHEMICAL EARTHING PIPE/ PLATE EARTHING AT VARIOUS PLACES IN BHDC AND NEW OPD COMPLEX UNDER GE (EAST) DELHI CANTT-10
2025_MES_728992_1
GE/DE-79/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D/ Cat b (i)
9 documents required · 9 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹79,360
Yes
25 Nov 2025
2 Sept 2025
2 Oct 2025
2 Sept 2025
30 Sept 2025
16 Sept 2025
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .