Renovation of House No. 2607 and 2641 (Type XII) Sector 19 Chandigarh (Total 2 Nos. houses) (IBM Scheme No. W4/2025/25257)

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level :DSR 4.1

1:2:4 (1cement :2coarse sand :4graded stone aggregate 20mm nominal size) DSR 4.1.3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 above plinth in:.DSR 6.4

Cement mortar 1:4 (1 cement : 4 coarse sand).DSR 6.4.1

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of EIC. DSR15.2

Nominal concrete 1:3:6 or richer mix (i/c equivalent design DSR 15.2.1

12 mm cement plaster of mix :.DSR 13.1

1:6 (1 cement: 6 fine sand).DSR 13.1.2

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR 17.7

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10

Kitchen sink without drain board

610x460 mm bowl depth 200 mm DSR 17.10.2.2

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16 A

Providing &fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28

Semi rigid pipe17.28.1.1

Providing and fixing soil, waste and vent pipes :DSR 17.35

100 mm diameter : DSR 17.35. DSR 17.35.1.2

75 mm diameter : DSR 17.35. DSR 17.35.2.2

Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :DSR 17.60

100 mm inlet and 75 mm outlet DSR 17.60.2.1

Providing &fixing G.I.pipes complete with G.I. fittings , clamps, i/c cutting and making good the walls etc. DSR 18.10

15 mm dia nominal bore DSR 18.10.1

20 mm dia nominal bore DSR 18.10.2

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11

15 mm dia nominal bore DSR 18.11.1

20 mm dia nominal bore DSR 18.11.2

Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21

45 cm length DSR 18.21.2

15 mm nominal bore DSR 18.21.2.1

Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46

15 mm nominal bore DSR 18.46.1

20 mm nominal bore DSR 18.46.2

Providing &placing on terrace (at all floor levels) polyethylene water storage tank, ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes forinlet,outlet and overflow pipes but without fittings and the base support for tank.[500 ltr] DSR 18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :DSR 18.49

15 mm nominal bore DSR 18.49.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51

15 mm nominal bore DSR 18.51.1

Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to DSR18.52

15 mm nominal bore. DSR 18.52.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53

15mm nominal bore DSR 18.53.1

Providing and fixing of Extension nippple upto 1-1/2" length DSR 18.53A

Cutting holes up to 30x30 cm in walls including making good the same:DSR 18.76.

With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to15x15cm in R.C.C. floors and roofs for passing drain pipe etc.and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1cement: 2 coarse sand:4graded stone aggregate20mm nominal size) including finishing complete so as to make it leak proof. DSR 18.77.

Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal

Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO

Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make

Providing& Fixing of drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings

upto 100 mm

Conversion for OWC to EWC with 4" C.I. bend, 4" PVC collar 1 No 4" PVC pipe upto 1'-6" long including dismantling of OWC pan and floor and repair of flooring to its original condition complete in all respect with satisfaction of EIC.

Providing and fixing GI Tank Nipple 20 mm dia complete

Const. of curb with C.C. 1:2:4 alongwith upto 1’-0” depth to make it water proof including Cost of sand, bajri

Provding and fixing SFRC G.T.cover and frame size 375X375X25 mm thick made out of MS angle iron size 25X25X5 mm thick with fixing wire mesh of size 1"X1" of 10 gauge including cutting,, welding and fixing with cement concrete 1:1 1/2:3.

Providing and fixing of SFRC I.C cover & frame 600x 600mmx 35 mm

Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete.

Providing and fixing of C.P. Nozzle Tap for Gardening