SPL REPAIR TO JCOs OR FAMILY AND SINGLE QUARTER AT NDC OUT HOUSE UNDER GE NEW DELHI

M & L for providing & injecting chemical emulsion for post constructional antitermite treatment along external wall below conc or masonry apron using chemical emulsion @ 2.25 ltrs per linear meter incl drilling and plugging holes etc in apron.

M & L for Treatment of soil under existing floors using emulsion @ 1 Ltrs per hole, 300 mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors.

M & L for providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same.

Demolition of old damaged existing water proofing compound on RCC roof of any description in any position and specification and cleaning the surface thoroughly and removing materials from site of work and providing the following works :- (a) Over 15 mm thick screed bed in cement mortar 1:4 on roof surface or concrete surfaces, finished even and smooth (without using extra cement) mixed with WPC (200ml per 50kg of bag cement) all as specified and directed. (b) Applying evenly a coat of bitumen primer @ 0.50 Kg/Sqm. (c) Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.0 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture instructions. (d) Sealing edges well into grooves & protect with CM 1:2 complete all as specified and directed. (e) M&L for providing hydraulically pressed PCC tiles of size 250x250x20 to 22mm thick with grey cement and joints of tiles filled with cement morter 1.3 mixed with water proffing compound all coplete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, vertical surface of walls etc..

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed base 15 mm thick in cement mortar and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed

Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises

S&F coloured glazed ceramic tiles in vertical surfaces (300x200mm/350x250mm/450 X 300mm/6/7mm thick for work on vertical surface such as skirting/dados of 1 st quality set and jointed in neat cement slurry and pointed in white/coloured cement to match including rendering 10 mm thick on fair faces of brick work in CM 1:4 finished even and fair as in backing layer including demolition plaster till exposing of brick/concrete surface complete all as per specification and directed.

S&F non skid ceremic coloured tiles 7 to 8 mm thick (square/ rectangle) area of each tiles exc 0.11 but n.exc 0.18sqm in floors set and jointed in neat cement slurry and pointed in white /coloured cement laid over and incl 15mm thick screed in CM 1:6 complete all as per specification and directed.

M&L Virified Ceramic tiles lightshade 10 mm thick (s rectangular) polished, area ofeach tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6.

All as per item Sl No 14 above but as in skirting/dado etc over and including renderning 10 mm thick cement mortar 1:4 complete all as specified.

M & L for Stop valves(angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed one ends for iron pipe complete (fixed in repairs) .

M&L for Vitreous, China wash basin, white , flat back , size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.(fixed in repairs)

S&F in repair 15mm dia chromium plated quarter turn wall mixer hot and cold L bend 3 in 1 pattern fixing and connection to pipe complete all as specified and directed

S & F in repair stainless steel plate rack of size 60x60x25cm made with 1.0mm thick sheet including taking out existing plate rack complete all as specified and directed

Taking down chowkhats or frame without taking off shutters n. exc 1.50 sqm each complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F in LED Bulkhead fittings 12 Watts 230 Volts AC, complete with LED Light & all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill) complete all as specified and directed.

M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including hold fasts or screws confirming to Fe.290.Gde-E-165 complete all as specified.

S&F powder coated aluminum frame / guiding rail for sliding or side hung windows/ventilators and incl. for sliding shutters with one or more rebates incl. necessary joining cleats, rubber gasket/beading glazing clips for fixing, etc complete all as specified.

M&L for Glazing with plain sheet glass, ordinary quality, 5 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F 100mm long (size) butt hinges, heavy weight stainless steel AISI 304 grade with brass/bronze hinge pin complete

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.

S&F stainless steel drapery curtain rods gold or antique silver 25mm nominal dia and minimum wall thickness 1.20mm of SS-304 grade of approved brackets design as approved fixed in brick/ concrete wall with same finished knobs/latto on each end of curtain rod including taking down old pelmet, complete all as specified and directed.

S&F, 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed.

S&F stainless steel AISI 304 grade floor door stopper with twin rubber shoes double door stopper 75 mm long complete all as specified and directed.

S&F 100mm long extruded fancy D' type type SS handle for kitchen cup boards shutters, cabinets, crockery shelf drawers fixed with nuts , screw and washer complete all as specified.

S&F 150 mm ordinary helical door springs incl roller & roller plate complete of mild steel.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete.

Taking up or down steel tubing and connections of 15mm bore all as specified.

Taking up or down steel tubing and connections of 20mm bore all as specified.

M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.

M&L for Cutting chases in Brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

Refixing old GI 15mm dia tubing incl new fitting to walls ceiling to flooors in old/new position

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M&L renderning 15 mm thick ready mix plaster of approved make including application of bonding coat on brick/concrete ( External surfaces) finished even and smooth complete all as specified and directed.

M&L renderning 15 mm thick ready mix plaster of approved make including application of bonding coat on brick/concrete ( internal surfaces) finished even and smooth complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.

M& L for applying two or more coats of oil bound distemper on newly plastered surfaces of walls including a coat of 1.50 mm thick (average) wall care JK putty to give an even and smooth surface including preparation of new surfaces all as specified and directed.(Note-Payment shall be made for two coats only ) complete all as specified and directed. Make Asian paints (Royale) ICI Dulux /Nerolac paints /Berger (Bishon). Distempering shall be carried by using paint roller through authrosed applicator only. ‘(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.”

M & L for applying two coat of distemper oil emulision (O.B.D) white or tinted (As approved) on walls surfaces including preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. ‘(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.”

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls/ceiling and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. ‘(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.”

M&L for complete removal of old plastered surfaces of walls/ceiling and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. ‘(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.”

Dismantling boarding, any description, fixed in any position with nails.

S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware etc and the edges shall be covered with PVC banding tape complete all as specified and as directed by Engr-in-Charge, working station etc Make Kitply/M/s Green Ply

M&L Continuous (piano) hinges, mild steel, brigh

t finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified and directed.(fixed in repairs)

S& F magnetic catch for wooden cupboard with complete closer mechanism claps and clips fix with stainless steel screw.complete all as specified and as directed.

Each Job

M&L for point wiring with PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 25 mm dia medium grade ISI marked and its accessories including provn of new factory pressed steel modular switch/terminal box of suitable size (Thickness of MS Sheet should not be less than 1 mm) and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :- Make : Havells, Polycab, RR Kabel, KEI, Finolex

One Light Point controlled by One No, One way 5 Amp Switch.

One Ceiling Fan/Exhaust Fan Point controlled by One No, One way 5 Amp Switch.

One Bell/Buzzer Point controlled by One Bell Push button

One Three Pin 5 Amps Socket Outlet point controlled by One No, One way Switch on Independent Board.

M&L for cable XLPE insulated screened PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of 95 Sqmm 3.5 Core laid in Trench/Wall/floor with U-Clamp or Clip complete all as specified and directed by Engr-in-Charge.

One Three Pin 5 Amp Socket Outlet Point controlled by One No, One way switch on same board.

S&F in replacement of Modular Switch single Pole 6 Amp 250V AC with ISI mark including 6 Amps Switch frame complete all as specified and directed. Make : Legrand Arte Cat Part No. 573400, Havells (Murano) ACUSXXW101, Schneider - X1001WH

S&F in replacement of Modular Switch 16 A SP one way 240 volts complete all as specified and directed. Make : Legrand Arte Cat Part No. 573410, Havells (Murano) ACUSXXW161, Schneider - X1101WH

S&F in replacement Modular Type socket 6 A, 02 Module Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make:- Legrand.Cat Part No 573470, Havells(Murano)- ACUKXXW063, Schneider-X2005WH

S&F in replacement of Bell Push Modular type complete all as specified and directed. Make : Legrand Cat Part No. 673404, Havells (Murano) : ACUSBXW101, Schnedier - X1005WH

S&F electric bell AC 230 Volt ding-dong type comlete all as specified and directed by Engr - in - Charge all as specified. Make: Havells- AHLLXXR000 or equivalent in Legrand/ Schneider/IndoAsian.

S&F ceiling rose 3 Phase/ PVC/Polycarbonated, isolated body ISI Marked all as specified.

Supply and fixing of Modular MCB SP 16 Amps 240V 10 KA, C-Curve, fitted in main switch board, including 2.5 sqmm wire connecting power socket & modular MCB complete all as secified and directed by Engr-In-Charge. Make: Havells Cat No. DHFNCSPA016,LK (L&T) -CB93101KW16, Schneider Cat Part No P8016-N.

S&F in replacment of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule). Note : Make of the MCB should be the same as that of DB.

MCB SP 5 to 32 Amps, Type-'C'

MCB DP/SPN 25 to 32 Amps, Type - 'C'

S&F in LED Tube light fittings 10 Watts (Approx Size 2 Feet) 230 Volts AC complete including connecting up with three core twisted flexible copper conductor cable having minimum P.F>0.95, minimum efficacy 100 Lumen/Watt, IP-20 Rating all as specified. Make : Bajaj, Crompton, Philips

M&L Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges fixed complete all as specified and directed.(fixed in repairs)

S&F in LED Tube light fittings 20 Watts (Approx Size 4 Feet) 230 Volts AC, box type complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable of suitable size having minimum P.F>0.95, minimum efficacy 120 Lumen/Watt, IP-20 Rating all as specified. Make: Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton cat part No CCS-100-20-65-HL2-OP-NWH, Philips cat part No BN308C LED20S-6500 L120 PSU WH

Supply and Fixing of Metal Body Exhaust Fans 300 mm sweep, 230 Volts, 50 Hz including louvers. The rate should inlcude making proper arrangements for fixing i.e. Cutting Bricks/Stone Boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified and directed. Make : Havells CAT Part No.FHVVEMTBRN12, USHA CAT Part No.151022661, Crompton CAT Part No.DE-022

Taking down/ dismantelling ceiling fan,size 1200mm including fan blade complete in all respect complete all as specified and directed. Note : Old unserviceable Ceiling Fans shall be deposited to the MES Store and be taken on charge under demolition/salvage register.

Supply and fixing in replacment BLDC ceiling fan 1200 mm sweep, minimum air delivery 230 CFM, with remote 230 volts having full copper motor & ribbed aluminium blades for higher air delivery, powder coating provides longer life complete with accessories including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified & directed . Make : Havells (Enticer Prime), Orient (Ecotech Prime), Bajaj (Ethora Plus)

Taking down old sub main wiring any size aluminum/copper conductor cable from the concealed conduit from the wall/ceiling and making good to the disturbed surface all as specified.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 6.0 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 6.0 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed. Make : Havells, Polycab, RR Kabel, KEI, Finolex Note (i) : Two (02 No) Runs of 6.00 Sqmm copper conductor cable, 01 Run of PVC Conduit a

nd 01 Run of 6.00 Sqmm copper conductor earth wire shall be measured as one RM. (ii) Rate quoted for this item shall be inclusive of the cost of rigid non-metallic PVC conduit of 25 mm dia with Tees, Elbows, Reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 4.0 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4.0 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed. Make : Havells, Polycab, RR Kabel, KEI, Finolex Note (i) : Two (02 No) Runs of 6.00 Sqmm copper conductor cable, 01 Run of PVC Conduit and 01 Run of 6.00 Sqmm copper conductor earth wire shall be measured as one RM. (ii) Rate quoted for this item shall be inclusive of the cost of rigid non-metallic PVC conduit of 25 mm dia with Tees, Elbows, Reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI lead earth wire of 4 mm dia (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc.

S&F rigid non-metallic PVC conduit medium grade 25 mm dia for cable complete with all fixing accessories all as specified.

Supply and fixing in replacment Electric Water Heater of Capacity 25 Litres, BEE 5 Star rated heating element upto 2 KW with glass line inner tank with whirlflow technology, Mg anode rod, IPX4 high strength polymer body complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. Make : Bajaj Armour series Pentacle , Havells Adonia R, Crompton Solarium CARE. Note : The contractor needs to submit manufacturing warranty of geyser of minium two years to Engr-in-charge.

M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including galvanised iron strip 25×4mm as earthing lead (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc.

S&F MCB DBs Single pole with neutral, Sheet metal enclosures double door type, 240 Volts, with 100 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete without MCB and with enclosures blank plate for unused way suitable for 6 Way including cutting chases and making good to walls. Make : Legrand, L&T, Schneider

S&F MCB DBs Single pole with neutral, Sheet metal enclosures double door type, 240 Volts, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete without MCB and with enclosures blank plate for unused way suitable for 8 Way including cutting chases and making good to walls.

Disconnecting mains connection and taking out old distribution board any way SPN with 200 amp rated bus bar complete with MCB and making good to the disturbed surface all as specified.

M&L for Dismantling of existing VTPN DBs, including careful removal of wiring connections and accessories, stacking serviceable DBs for refixing, refixing the good DBs at designated locations with proper alignment, making necessary terminations, and removal of unserviceable/extra DBs, including transportation of dismantled material within site premises, all as directed by Engineer-in-Charge.

Supply and Fixing of Perforated Cable Tray of size 150 mm wide x 50 mm deep x 2.0 mm thick, fabricated from pre-galvanized sheet steel (minimum zinc coating 120 GSM), including all necessary bends, couplers, tees, reducers, supporting brackets, nuts, bolts, suspension rods, clamps, and all required hardware as per site conditions, laid on wall/ceiling/truss/structure, complete in all respects as per drawing, specifications, and directions of Engineer-in-Charge.

Supply & fix of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way V-TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete and including taking out old unsv DB any type/size and cutting chases and making good to walls all as specified. Make : Legrand or equivalent in L&T / Schneider.

Supply fix of MCCB 4-Pole 40 Amp, 16 kA thermal magnetic type in replacement complete all as specified. Make : Legrand, L&T, Schneider