Repair work of the minor bridge on the Karmanasha River at km 0-4(600) of the Dildarnagar Devatha Karamhari road

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. SI. No. - 12.04 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (RCC M-30) SI.No.12.08 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

Supplying, fitting and placing HYSD bar reinforcement in foundation comlete as per drawing and technical specifications (Foundations) SI.No.12.42 (1600) (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

Provinding and laying Cement concrete wearing coat M-35 grade including reinforecement comlete as per drawing and Technical Specification SI No 14.4 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

Construction of embankment with approved material obtained from borrow pits with 1 km. lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of 95% of proctor density as per S.I. No 305(3.16) (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

Providing & laying pitching on sloples laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawings and Technical specification MORT&H Specification 2504 sr. No.16.04 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )