PROVN OF LADIES REST ROOM WITH ATTACHED TOILET FOR BSO (SOUTH), ADDN/ALTN TO ROOF TREATMENT IN ORs MD ACCN BLDG NO.P-121 (UNDER 132 INF BN TA (RAJPUT) AT VASANT RANGE COLONY AND CERTAIN MINOR WORKS UNDER AGE B/R-I AND AGE E/M OF GE (SOUTH) DELHI CANT

Amount

Surface dressing n.exc. 15 cm deep in soft/loose soil complete all as specified and as directed.

Excavation in trenches in soft/loose soil, n.exc. 1.5m wide and n.exc. 1.5m in depth for foundations etc. n.exc. 10 Sqm on plan and getting out complete all as specified and as directed.

All as per Srl item No.2 above, but exc 1.50 and n.exc 3.00 m in depth.

M&L for Cement concrete type D-2 (using 40 mm graded stone agg), 1:4:8 as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter etc. complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions. Square, Rectangle or Polygon etc complete all as specified and as directed.

M&L for RCC, M-25 (Design Mix) (20mm graded aggregates) as in foundation, including rafts, footings, foundation beams, plinthbeams, bases for columns etc. basement slab, under rimmed piles and mass concrete etc. complete all as specified and as directed.

M&L for RCC, M-25 (Design Mix) (20mm graded aggregates) as in slabs supported on walls, beams and column in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC, M-25 (Design Mix) (20mm graded Aggregates) as in beams, cantilevers, bressumers, lintel over 1.5 m span complete all as specified and as directed.

M&L for RCC, M-25 (Designe Mix) (20mm graded aggregates) as in column, pillars, piers, posts and struts complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm in Soft/loose soil complete all as specified and as directed.

Removing excavated material to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

S&F TMT bars as in reinforcement, 10 mm dia and over, cut to length, bent to shape requied, including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

S&F TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc. complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 etc. complete all as specified and as directed.

M&L for 10 mm thick cement plaster in CM 1:6 finished even and smooth to brick/concrete surfaces of walls complete all as specified and as directed.

M&L for 15 mm thick cement plaster in CM 1:4 finished even and smooth to brick/concrete surfaces of walls complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 in ceiling ,soffit and sides of RCC column, slab, landing, waist slab, chajja, roof projection etc. complete all as specified and as directed.

M&L for two coats of oil emulsion distemper to newly plastered wall surfaces including preparation of surfaces, over a coat of alkali resistant priming paint etc. complete all as specified and as directed.

M&L for two coats of distemper oil emulsion on ceiling surfaces including preparation of surfaces over a coat of primer complete all as specified and as directed.

M&L for preparation and application of two or more coats of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm as per manufacturer's instructions. The paint should also be 100% anti fungal, damp proof, weather proof over and including water proof wall care putty to achieve even and smooth surface over new plastered surfaces of wall complete all as specified and as directed. Make : Asian Paint (Apex Ultima Protek)/Berger Paint (Weather Coat Long Life-10)/Acro Paint (Acro Guard 3X)/Dulux Paint (Weather Shield Elastomeric). Note : Primer should be compatible with the paint.

M&L for Two coats of synthetic enamel paint to newly wooden surfaecs of any discription over 10 cm in width or girth over one coat of pink primer etc. complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors, skirting etc. over and including 15 mm thick screed bed in cm 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and as directed.

M&L for glazed coloured, joint free ceramic tiles in vertical surface of size 450X300X7 mm thick, over and including 10 mm thick rendering in CM 1:4 as backing,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface etc. complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base etc. complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate for plinth protection laid in bays including necessary formwork etc. complete all as specified and as directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and including screed bed 20 mm thick in cement mortar (1:4) ,including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F powder coated aluminium frame for ventilators with one or more rebates including joining cleat for fixing of glass etc. complete all as specified and as directed.

S&F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading/gasket etc. complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight of stainless steel complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section and fixed complete all as specified and as directed.

S&F aluminium handles, 150 mm size fabricated type complete all as specified and as directed.

S&F powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.

S&F for Aluminium anodised door with shutter, chowkats /frame made with Aluminium section of size 100 x 44 x 2 mm thick vertical styles of shutters made with sections 84 x 44 x 2 mm thick and top/middle/bottom rail of shutter with sections 112 x 44 x 2mm thick including 5 mm thick tinted glass panes/ 12mm partical board as per directed by Engr-in- Charge, inserted including necessary fixing arrangement, jointing cleats, glazing clips, rubber packing aluminium anodised beading screw sets floor hinges tower bolts 200 mm size, mortice lock 100 mm size 4 lever, round handles etc. fitted to shutter and frames fixed in positon including hold fast of size 25 x 3 mm flat, 150 mm long, 6 nos in each frame including cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150x150x150 mm each and match the existing surfaces complete all as specified and as directed.

S&F door closer aliminium (die cast) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F Vitreous China, semi-pedestal pattern (Anglo-Indian) Type Joint between flushing pipe and socket of W.C. pan with seat cover complete incl fixing of flush pipe etc. complete all as specified and as directed.

S&F low level flushing cistern, PVC, 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve etc. complete all as specified and as directed.

S&F chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour etc. complete all as specified and as directed.

S&F Vitreous China wash hand basin, while, flat back of size 580x450mm (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets etc. complete all as specified and as directed.

S&F Bib taps for iron pipe 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and as directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed etc. complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F two way angle bib cock chromium plated fancy type 15 mm bore/size etc complete all as specified and as directed.

S&F Soap dish, chromium plated, any type, fixed to plugs with chromium plated brass screws etc. complete all as specified and as directed.

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats etc. complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc. complete all as specified and as directed.

S&F PVC 75mm floor trap, with grating including jointing solvent cement etc. complete all as specified and as directed.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm dia pipe etc. complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm dia pipe complete all as specified and as directed.

S&F galvanised iron pipe with all fitting and fixed complete to walls and ceilings or laid in floors medium grade 20 mm dia complete all as specified and as directed.

S&F galvanised iron pipe with all fitting and fixed complete to walls and ceilings or laid in floors medium grade 15 mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for WC outlet pipe of 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for bath outlet pipe of 75 mm dia complete all as specified and as directed.

S&F 500 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

M&L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified and as directed.

M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid seperately.

Supply only liquid Water Proofing Compound as per relevant IS complete all as specified and as directed.

M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-

(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.

(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).

(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.

(d) Preperation of surfaces and applying two coats of aluminium paint on top of roof surfaces.

(e) Make of APP : "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.

All as per Srl item No.63 above, but on vertical surfaces.

Note for items 63 & 64 :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

Surface exacavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for sand filling under floors or in foundation including watering and consolidation etc. complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block (PU molded ) of 80 mm thickness any shape and size and color, M-35 Grade with grey cement and pigments including glossy cotting ultra finish complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, bed blocks, bands and similar work including weathering rounded or chamferred angles and throating including necessary form work required complete all as specified and as directed.

S&F 100 mm bore salt glazed stoneware (SGSW) drain pipes, laid in trenches and jointed as specified and connecting to existing manholes complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for sewage pipe 100mm bore complete all as specified and as directed.

M&L for brick work using old size bricks of class designation 10, built in cement mortar (1:4), straight or curved on plan, exc 6 metre mean radius complete all as specified and as directed.

S&F SFRC manhole cover size (1200X600x70) mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame :- (a) M/s PS Concrete. (b) M/s KK Manhole. (c) M/s BRHL Concrete Industries.

Extra for forming fair furnished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds, mitred/stopped ends etc. complete all as specified and as directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or complete all as specified and as directed.

M&L for 50 mm thick (average thickness) plain cement concrete 1:2:4, type B-0, using 12.5 mm graded stone aggregate, as in roof, padding to maintain the uniform slope complete all as specified and as directed.

M&L for cement concrete tiles 25cmx25cmx22mm thick, laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3. complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick rendering with redimix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on wall of up to four stories bldgs. Notes :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer.

M&L for complete removal of existing treatment by mechanical means and applying water proof wall care putty to achieve even and smooth surface and then applying two coats of 100% anti fungal acrylic emulsion exterior grade weather proof paint over and including one coat of exterior primer complete all as specified and directed. Make : Asian Paint (Apex Ultima Protek)/Berger Paint (Weather Coat Long Life 10)/Acro Paint (Acro Gurad 3X)/Dulux Paint (Weather Shield Elastomeric). Notes : (i) The surface shall be got approved by the GE befoe application of first coat of paint and then before subsequent coat. (ii) Primer should be compatible with the paint.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thirteen) auth cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper gerometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. Note : Steel welded mesh is to be tightening /welding with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia bore complete all as specified and as directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly+nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F MS tubes, medium grade galvanised iron pipe with all fittings and fixed complete to walls and ceilings or laid floors, 15 mm bore of pipe including taking down of old unserviceable pipe complete all as specified and as directed.

All as per Srl item No.90 above, but 20 mm bore of pipe

S&F galvanised iron pipe with all fitting and fixed complete to walls and ceilings or laid in floors medium grade 32 mm dia complete all as specified and as directed.

Cutting of trees including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Taking down chowkhats or frames with shutter exc 1.5 sqm and nexc 4.00 sqm each but without taking off shutters from the frame incl removing complete all as specified and as directed.

All as per Srl item No.95 above, but n.exc 1.5 sqm each

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section as under, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. Make/Style rail – Jindal Section No.20805 or 20807, 40mm x18mm x0.91mm thick, Wt. @ 0.325 Kg/RM or equivalent. Note: Glass and other fittings material shall be measured & paid separately.

M&L for 6mm dia powder coated aluminium decco grill, (minimum thickness of powder coating 50 micron), section No-104, 100mm aperture of hexagonal design and pattern as approved complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avg aparture 1.4mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of OBD, white or tinted, over 3mm thick wall care putty complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primess complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, finished rough and even complete all as specified and as directed.

M&L for non skid coloured ceramic tiles jointless 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed bed in cm 1:6 for laying floor finish complete all as specified and as directed.

Taking down shutter of any description exc 1.00 sqm nexc 2.00 sqm each and refixing the same opening including easing and adjusting the same complete all as specified and as directed.

Excavation in post holes each in exc. 0.50cum getting out returning filling in and ramming earth in layers not exc. 25cm watering & removing surpius soil to a distance n exc. 50m & making good surface in hard/dense soil complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-2, using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed.

S&F MS angle iron (Fe-290 grade 165) as in fencing posts & struts holes drilled in for securing wire incl cutting top to shape & flat iron for securing wire mesh including all necessary drilling, bolting or riveting, weldings etc. complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section gusset plates, rails braces etc, drilled for fixing, and other covering door etc to be prepared for hanging and sliding with and including either hooks and hinges and steel hanging door fittings and other covering running rails and guides and hanging also fastening and fixing complete. Fe- 410 Grade E-250 quality -Bl complete all as specified and as directed.

S&F mild steel screw bolts (machine cut) with hexagonal or square heads at one end and screwed the outher or screwed both ends, each screwed end to be fitted with washers and one heragonal or square exc 5 cm but n.exc 10 cm long and 12 mm dia 75 mm long complete all as specified and as directed.

S&F Mild steel round bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hopping for colours hooking ends and binding with a including security bolts post and struts in fencing including cutting top to shape, drilling holes notching for wire etc. complete all as specified and as directed.

M&L for preparation of surfaces or any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of surfaces of any description n.exc 10 cm in width or girth when unconnected with outher painting or when painted in a different tint complete all as specified and as directed.

S&F chain link MS galvanised fencing 50 mm Square mesh with 10 gauges incl line wires any mesh size & type to any type of standards rails straining bolts etc. incl provision of binding wire complete all as specified and as directed.

M&L for point wiring for one light/fan/bell point/security light controlled by one way switch complete with single core multi strand copper conductor 1.5 Sqm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including concealed PVC conduit medium grade and Modular sunken pressed steel terminal box 2 mm thick required size including modular plate and modular flush box in different module with all accessories including 1.5 Sqm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed.

All as per Srl item No.114 above, but One 3 pin socket outlet 5 amps on same board

All as per Srl item No.114 above, but One 3 pin socket outlet 5 amps point independent board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire as power point.

All as per Srl item No.114 above, but One 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

S&F Switch Modular type switch, 6 Amp 1-way SP switch with finger proof terminal complete all as specified and as directed.

S&F modular type 2/3 pin combined shuttered type 6A socket, complete all as specified and as directed.

S&F Switch Modular type switch, 16 A 1- way SP switch with finger proof terminal complete all as specified and as directed.

S&F modular type 2/3 pin combined shuttered type 16 A socket, complete all as specified and as directed.

S&F 6A 250V ceiling rose complete all as specified and as directed.

S&F Modular electric bell ding dong AC, 230 volts single phase complete all as specified and as directed.

S&F Bell push modular type 1M 5/6 Amp complete all as specified and as directed.

S&F 20 Watt surface/wall mounted LED batten capable of delivering minimum 2000 lumen having PC diffuser luminius efficincy not less thn 115 lumen/Watt CRI>80% PF>0.9,CCT 6500K indeoendent isolated SPMS based constant current electronic LED driver with THD < 10% surge protection and other safety tests as per IS 15885( Part-2/Sec-13) : 2012 polycarbonate diffuser housed in power coated white extruded aluminium channel housing, white coloured ABS end caps IP 20 protection input voltage range 140-270V input fequency 50-60Hz including electrical connection with 3 core flexible Cooper Cunductor cable of Appropriate size from ceiling rose to the fixture complete all as specified and as directed.

S&F 10 Watt surface/wall mounted mirror LED batten capable of delivering minimum 1150 lumen having PC diffuser luminius efficincy not less thn 115 lumen/Watt CRI>80%, PF>0.9,CCT 6500K indeoendent isolated SPMS based constant current electronic LED driver with THD < 10% surge protection nd other safety tests as per IS 15885( Part-2/Sec-13) : 2012 polycarbonate diffuser housed in power coated white extruded aluminium channel housing , white coloured ABS end caps IP 20protection input voltage range 140-270V input fequency 50-60Hz including electrical connection with 3 core flexible Cooper Cunductor cable of Appropriate size from ceiling rose to the fixture complete all as specified and as directed.

S&F 06 Watt surface mounted round shape LED downlighter capable delivering 1200 lumen having luminius efficiency not less than 115 lumen/watt starting time <.5 s CRI>80%, PF>0.9,CCT 6500K input voltage range 140-270V input fequency 50-60Hz anb B22 socket complete all as specified and as directed.

S&F BLDC (Brush Less Direct Current) Ceiling fan, 1200 mm with Remote control suitable including Modular fan regulator, not less than 350 RPM, not less than Air delivery 220 CFM with service value 6.85 BEE, 5 Star , voltage 230V, high air follow with silence operation, having full copper winding & ribbed blade 3 Nos A/M blades. The BLDC motor fan shall have 100% rust free blade complete all as specified and directed

S&F SPN 12 Way Modular type double door mettalic DB conforming to IEC 61439-3 suitable for flush / surface mounting having 100 A copper busbar fully shrouded neutral bar earth bar wire set & cable ties for cable management pre fiited sheet etc. Having IK 09 & IP 43 protection in IS 732:2019 complete all as specified and as directed.

S&F MCB SPN 'B' curve 63 Amps 240 Volts , 10 KA including sutable size of thimbles complete all as specified and as directed.

S&F MCB SP 'B' curve 06 to 32 Amps 240 Volts 10 KA including sutable size of thimbles complete all as specified and as directed.

S&F steel body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender.

MAA BHAWANI CONSTRUCTION

M/S Parmod Johar