REPLACEMENT OF WORN OUT COMPONENTS PAINTING POLISHING OF STEEL AND WOODEN FURNITURE AT DHAR ROAD UNDER GE ARMY DHAR ROAD

Amount

WOODEN FURNITURE : Taking down worn out components of the following furniture items, S&F new component without having any defect as per shape and size as specified and shown on respective drawings and as directed by Engineer-in-charge

Bed Plywood Top(Bed Hard) FD-246

Removing of unsv plywood and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for head rest of bed plywood all as shown on drg and as specified.

Removing of unsv plywood and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for foot rest of bed plywood all as shown on drg and as specified.

Removing of unsv/ broken long rail and providing/fixing new long rail made out of timber 1st class hard wood for bed plywood all as shown on drg and as specified.

Removing of unsv/ broken short rail and providing/fixing new short rail made out of timber 1st class hard wood for bed plywood all as shown on drg and as specified.

Removing of unsv/ broken base stiffner to support plytop and providing/fixing new base stiffner made out of timber 1st class hard wood for bed plywood all as shown on drg and as specified.

Removing of unsv/ broken plywood from bed and providing new plywood BWR grade commercial 12mm thick 7 ply of confirming to IS 303 of 1975 to bed ply wood top all as specified and shown on drg. fixed with nails wire 25mm long. Make Century ply/Archid ply/Kit ply/Green ply

Chair dining FD/MAP-II/05

Removing of unsv / broken rear legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing with new back rest 1st class seasoned teak wood back rest for chair dinning all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing with new stiffener 1st class seasoned teak wood stiffeners for chair dinning all as shown on drg and as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new front/rear rails 1st class seasoned teak wood front/rear rails for chair dinning all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new 1st class seasoned teak wood front/rear rails for chair dinning all as shown on drg and all as specified.

Removing of unsv/broken PVC seat and providing/fixing with new PVC Sheet seat of Make : Amko/Cello as approved by Enginner-in-Charge

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Chair dining FD-228 , FD-279

Removing of unsv / broken rear legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing with new back rest 1st class seasoned teak wood back rest for chair dinning all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing with new stiffeners 1st class seasoned teak wood stiffeners for chair dinning all as shown on drg and as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new front/rear rails 1st class seasoned teak wood front/rear rails including drilling of Cane holes for chair dinning all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new side rails 1st class seasoned teak wood front/rear rails including drilling of Cane holes for chair dinning all as shown on drg and all as specified.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Chair Writing FD-250, FD-280

Removing of unsv / broken rear legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair writing complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair writing complete all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing with new back rest 1st class seasoned teak wood back rest for chair writing all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing with new stiffeners 1st class seasoned teak wood stiffeners for chair writing all as shown on drg and as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new front/rear rails 1st class seasoned teak wood front/rear rails including drilling of Cane holes for chair writing all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new side rails 1st class seasoned teak wood front/rear rails including drilling of Cane holes for chair writing all as shown on drg and all as specified.

Removing of unsv/broken arms rest and providing/fixing with new arm 1st class seasoned teak wood arms rest duly shaped for chair writing all as shown on drg and as specified.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Chair Dining Officers FD/E6/MAP/10

Removing of unsv / broken rear legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dining complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dining complete all as shown on drg and as specified.

Removing of unsv/broken rear rails and providing/fixing with new rear rail 1st class seasoned teak wood rear rails for chair dining all as shown on drg and all as specified.

Removing of unsv/broken front/side rails and providing/fixing with new front/side rails 1st class seasoned teak wood front/side rails for chair dining all as shown on drg and all as specified.

Removing of unsv/broken bottom stiffener and providing/fixing with new stiffener 1st class seasoned teak wood bottom stiffener for chair dining all as shown on drg and all as specified.

Removing of unsv/broken back vertical stiffener and providing/fixing with new back vertical stiffener 1st class seasoned teak wood back vertical stiffener for chair dining all as shown on drg and all as specified.

Taking down old unserviceable foam cushion with Tapestry cloth cover from chair dining and S&F of new cushion 16"X16"X75mm (32 Density) duly cover stitched with tapestry cloth all as shown on drawing or as directed by Eng -In Charge. Note: Cost of tapestry cloth shall not be less then 300/Rm as approved.

Removing of old unsv seat plywood from Chair dining & S & F seat plwood 12mm thick of shape and size complete all as specified and as shown on drawing or as directed.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Chair Easy FD-229

Removing of unsv / broken rear legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair Easy complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair Easy complete all as shown on drg and as specified.

Removing of unsv/broken side rails and providing/fixing with new side rails 1st class seasoned teak wood front/rear rails including drilling of Cane holes for chair Easy all as shown on drg and all as specified.

Removing of unsv/ broken front/rear rails under neath seat frame and providing/ fixing with new front/rear rails 1st class seasoned teak wood rails made to shape and size for chair easy all as shown on drg and as specified.

Removing of unsv/broken arms rest and providing/fixing with new arms rest 1st class seasoned teak wood arms rest duly shaped for chair Easy all as shown on drg and as specified.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Teapoy FD-232, 278, 382

Replacement of unsv top of teapoy wooden providing new top made out of 18 or 19 mm thick pre laminated MDF Board confirming to IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Teapoy and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Teapoy and providing new Long rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv short rail of Teapoy and providing new short rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv side stiffener of Teapoy and providing new side stiffener made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Provn of wooden tringular bracket of size 75x75x30mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Table peg FD- 236, 277, 384

Replacement of unsv top of Table peg providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Peg Table and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Bottom rail of Peg Table and providing new bottom rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv stiffner of Peg Table and providing new stiffner made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv long rail of Peg Table and providing long rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv short rail of Peg Table and providing new short rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Table writing FD-249/ 275

Replacement of unsv top of Table writing providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Table Writing and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Table Writing and providing new Long rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Short rail of Table Writing and providing new Short rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Centre stiffener of Table Writing and providing new centre stiffner made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Side stiffener of Table Writing and providing new side stiffner made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv stainless steel Piano hinge for shutter of Table Writing and providing new Stainless steel piano hinge including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv door shutter of Table Writing and providing new shutter made of 18/19 mm thick Pre-laminated MDF board exterior grade OST with TW beading including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv sides of the box of Table Writing and providing new one made of 18/19 mm thick Pre-laminated MDF board exterior grade OST rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv back of the box of Table Writing and providing new one made of 6mm thick Pre-plywood OST rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv drawer of Table Writing and providing new drawer made of 18/19 mm thick Pre-laminated MDF board exterior grade OST with TW beading including knob rest all as shown on drg and as directed by Engr-in-Charge.

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Table 900mm x 600mm with or without Drawer FD-283, 284

Replacement of unsv top of Table writing providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Table Writing and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Table Writing and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv short rail of Table Writing and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Bottom Side stiffener of Table Writing and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Bottom centre stiffener of Table Writing and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Table dinning 6 persons FD-239/ 273/376

Replacement of unsv top of table dinning 6 pers providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Table dining 6 pers and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Middle stiffener of Table dining 6 pers and providing new stiffener made out of 1st class teak wood including tightening the frame rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Table dining 6 pers and providing new Long rail made out of 1st class teak wood including tightening the frame rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv short rail of Table dining 6 pers and providing new short rail made out of 1st class teak wood including tightening the frame rest all as shown on drg and as directed by Engr-in-Charge.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Table dinning 8 persons FD- 239, 273

Replacement of unsv top of table dinning 8 pers providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Table dining 8 pers and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Middle stiffener of Table dining 8 pers and providing new stiffener made out of 1st class teak wood including tightening the frame rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Table dining 8 pers and providing new Long rail made out of 1st class teak wood including tightening the frame rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv short rail of Table dining 8 pers and providing new short rail made out of 1st class teak wood including tightening the frame rest all as shown on drg and as directed by Engr-in-Charge.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Table Dressing Ladies FD-251, 378

Removing of unsv/old defaced mirror, unsv back plywood of mirror frame of table dressing ladies and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood commercial BWR grade 6 mm thick ply for back side of mirror frame and fixing to table dressing ladies including french polishing to frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old Pre laminated sheet from the top, side & drawwer facing of table dressing Ladies and providing new pre laminated sheet natural teak finish 1.5 mm thick on top, sides and drawer facing and new timber Ist class seasoned teak wood beading 4 mm thick and fixing to box of table dressing ladies all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood commercial BWR grade 6 mm thick 5 ply to the drawer bottom of table dressing ladies all as specified and shown on drg.

Removing of unsv/old sliding glass of table dressing ladies and providing new sheet glass 5 mm thick and fixing to table dressing ladies all as directed and specified and shown on drg.

Removing of unsv/old knob of table dressing ladies and providing new knob as apporved and fixing to table dressing ladies all as directed and specified and shown on drg.

Table Dressing Gents FD-230, 379

Removing of unsv/old defaced mirror, unsv back plywood of mirror frame of table dressing gents and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood commercial BWR grade 6 mm thick ply for back side of mirror frame and fixing to table dressing gents including french polishing to frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old Pre laminated sheet from the top, side & drawwer facing of table dressing gents and providing new pre laminated sheet natural teak finish 1.5 mm thick on top, sides and drawer facing and new timber Ist class seasoned teak wood beading 4 mm thick and fixing to box of table dressing gents all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood commercial BWR grade 6 mm thick ply to the drawer bottom of table dressing gents all as specified and shown on drg.

Removing of unsv/old knob of table dressing Gents and providing new knob as apporved and fixing to table dressing ladies all as directed and specified and shown on drg.

Side Board FD-241

Removing of unsv top from side board and providing new top made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv side from side board and providing new side made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv bottom from side board and providing new base made out of 18mm thick commercial plywood & providing teak wood beading on front side including french poliching complete all exposed wooden surfaces and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv shutter from side board and providing new shutter made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv drawer from side board and providing/fixing new drawer made out of prelaminated particle board 12mm thick side & back and 18mm thick front wall, 6mm thick commercial plywood 5ply fixed to bottom including teak wood beading all around of drawer top with glue, nails and metal screws where necessary, one Nos chromium plated knob and french polishing complete the all wooden surfaces all as specified and shown on drg.

Removing of unsv back plywood from side board and providing new plywood commercial 6mm thick 5ply fixed to side board with glue and metal screws including french polishing complete to all wooden surfaces all as specified and shown on drg.

Removing of unsv shelf from side board and providing new shelf made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board all as specified and shown drg.

Removing of unsv legs frame of side board from bottom and providing new legs frame made out of seasoned teak wood including french ploshing complete and fixed to bottom of side board with glue and metal screws all as directed and specified and shown on drg.

Removing of unsv shutter lock of side board and providing new lock best quality fitted to shutter with duplicate keys complete all as directed and specified and shown on drg.

Removing of unsv knob of side board and providing new knob to shutter with duplicate keys complete all as directed and specified and shown on drg.

Table centre FD- 235, 274

Replacement of unsv top of Table center providing new top made out of 18 mm thick pre laminated MDF board confirming to IS IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Table center and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Table center and providing new long rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv short rail of Table center and providing new short rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv stiffener (size 50x20x450 mm) of Table center and providing new stiffener made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

TABLE 900mm x 900mm FD-291

Replacement of unsv top of Table 900 x 900mm providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3097: 2006 with 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Table 900 x 900mm and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Table 900 x 900mm and providing new rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Hat Stand with Mirror FD-233/361

Removing of unsv/old defaced mirror and providing new sheet glass electro-copper plated mirror 5 mm thick and fixing to Hat stand including French polishing all as specified and shown on drg.

Removing of unsv/broken Plywood and providing New plywood commercial BWR Grade 4 mm thick 3 ply to back of Hat stand all as specified and shown on drg

Removing of unsv/ broken peg and providing new CP coated metal peg and fixing to Hat stand with metal screws all as specified and shown on drg

SOFA SET FIVE/FOUR SEATER: (27 + 50) FD-281/373

Taking down of Unserviceable broken wooden parts from sofa sets for five/four seater for replacement and supply & fixing new wooden parts made out of Ist class seasoned teak wood complete all as specified and as directed by Eng - In - Charge for the following :-

Leg of sofa chair Size 70X35X530mm

Arm rest of sofa chair of size 70 X 35 X 725mm

Wooden batten of size 50 X 20X670mm

Wooden rail of size 35 X 100X 670mm

Wooden front rails of 3 seater sofa of size 35 x 100 x1730 mm

Wooden bearer of size 40X40X670mm for single seater sofa

Wooden bearer of size 40X40X1730mm for 3 seater sofa

Wooden frame for back side rail of size 70X35X600mm

Wooden rail to support back frame for single seater sofa of size 30X50X670mm

Wooden rail to support back frame of size 30 X 50X1730mm for 3 seater sofa

Wooden back long rail frame of size 70X35X1660mm

Taking down of unserviceable foam cushion of sofa set 5/4 seater and S&F of new cushion 21" x 22'' x 100mm thick 40 Density Note: Make - Kurlon/ Sleepwell/ Century

Supply and fixing for cushion covers to fit cushion of size 21" x 22" x 100mm made with Tapestry cloth duly stitched with zip for sofa set 4/5 seater including taking down of the existing unserviceable one complete all as specified and as directed Note :- Rate of Tapestry cloth shall not be less than 450/- per RM as approved.

Chair Dining Long Back FD-357

Removing of unsv / broken rear legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv / broken side rail and providing new side rail made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv / broken front/rear rail and providing new front/rear rail made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Removing of unsv / broken stiffener and providing new stiffener made out of 1st class seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins for chair dinning complete all as shown on drg and as specified.

Taking down old unserviceable seat of foam cushion with leatherite cover from chair dining and S&F of new foam cushion 50mm thick 32 Density duly cover with leatherite rexine all as shown on drawing or as directed by Eng -In Charge.

Taking down old unserviceable back of foam cushion with leatherite cover from chair dining and S&F of new foam cushion 50mm thick 32 Density duly cover with leatherite rexine all as shown on drawing or as directed by Eng -In Charge.

Removing of unsv/broken PVC Shoe at bottom of the legs and and providing/fixing with new one as per sample approved

Table Bedside FD/E-6/MAP/15

Taking down old unserviceable Top and providing new top made out of 18mm prelaminated particle board including tightening the frame, rest all as shown on drg and as directed by Engr-in-charge

Taking down old unserviceable side and providing new side made out of 18mm prelaminated particle board including tightening the frame, rest all as shown on drg and as directed by Engr-in-charge

Taking down old unserviceable back ply and providing new back made out of 6mm thick commercial plywood including tightening the frame, rest all as shown on drg and as directed by Engr-in-charge

Taking down old unserviceable handle and S&F new chromium plated steel handle 100mm long as shown on drg and as directed by Engr-in-charge

Taking down old unserviceable Telescopic channel and S&F new Telescopic channel of good quality.as shown on drg and as directed by Engr-in-charge

Table dressing ladies with stool FD/MAP-II/07

Removing of unsv/old defaced mirror, unsv back plywood of mirror frame of table dressing ladies and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood commercial BWR grade 6 mm thick 5 ply for back side of mirror frame and fixing to table dressing ladies including french polishing to frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old Pre laminated sheet from the top, side & drawwer facing of table dressing Ladies and providing new pre laminated sheet natural teak finish 1.5 mm thick on top, sides and drawer facing and new timber Ist class seasoned teak wood beading 4 mm thick and fixing to box of table dressing ladies all as directed and specified and shown on drg.

Removing old Foam cushion from dressing stool and S&F 75mm, 32 density foam covered with fabric on seat to be fixed on 12mm thick ply on stool as per existing shape and size

Taking down unserviceable Wheel at the bottom of stool and S&F of new wheel as per existing shape and size

Bin Linen Multipurpose FD/E6/MAP/09

Removing of unsv top from Bin linen multipurpose and providing new top made out of 18mm thick prelaminated MDF board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to Bin linen multipurpose with glue and metal screws all as specified and shown drg.

Removing of unsv side from Bin linen multipurpose and providing new side made out of 18mm thick prelaminated MDF board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to Bin linen multipurpose with glue and metal screws all as specified and shown drg.

Removing of unsv shutter from Bin linen multipurpose and providing new shutter made out of 18mm thick prelaminated MDF board exterior grade & providing teak wood beading alround including french polishing complete and fixing to Bin linen multipurpose with piano hinges and metal screws all as specified and shown drg.

Removing of unsv drawer from Bin linen multipurpose and providing new drawer made out of 18mm thick prelaminated MDF board exterior grade & providing teak wood beading alround including french polishing complete and fixing to Bin linen multipurpose with piano hinges and metal screws all as specified and shown drg.

Removing of unsv handle from Bin linen multipurpose and providing new CP steel handle and fixing to Bin linen multipurpose with metal screws all as specified and shown drg.

Book Case FD-237

Removing of unservicable top from book case & providind/fixing with new top made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable side from book case & providind/fixing with new side made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable shelf from book case & providind/fixing with new shelf made out of prelaminated MDF board 12mm thick all as specified and shown on drg.

Removing of unservicable shutter from book case & providind/fixing with new shutter made out of prelaminated MDF board 18mm thick incl piano hinges all as specified and shown on drg.

Removing of unsv back plywood from book case & providing/fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete.

Removing of unservicable leg frame from book case & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and shown on drawing

Canning: Supply & Fixing for canning with approved shade of plastic cane of 2 mm wide, 0.5 thick half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after with and including removing of wornout unserviceable cane for Chair or Stool complete all as specified and as directed by the Engr-in-charge.

Chair dining FD-203/228/279

Chair easy (seat) FD-201/229

Chair easy (back) FD-201/229

Chair writing FD-202/250/280

Chair CB 'A' spl with hand rest FD-120(M)

Polishing: Material & Labour for applying polish to obtain glossy finish including preparation of polished surface by removing and cleaning of existing polish with the sand paper and fill the surface with Bee wax putty for making the surface for following furniture items complete all as specified and as directed by the Engr-in-charge -

Book case FD-237

Bed Plywood top FD-246

Hat Stand with Mirror FD-233

Peg Table FD-236/ 277/384

Table 900 x 900 mm FD-291

Table 900 x 600 mm with or without drawer FD-283, 284

Table dining for 6 persons FD-239/ 273/376

Table dining for 8 persons FD-239/ 273/376

Table writing FD-249/ 275

Table dressing gents FD-230/ 379

Table dressing ladies FD-251/ 378

Table center FD-235/ 274

Side Board FD-241/ 372

Teapoy FD-232/ 278/382

Chair dinning FD-279, 228

Chair dinning Officers FD/E6/MAP/10

Chair easy FD-229

Chair writing FD- 250,280

Chair dinning with long back FD-357

Chair dining for (JCO's/OR's) FD/MAP-II/05

Almirah Mess Utencils FD-93(M)

Sofa Single Seater FD-281

Sofa four Seater FD-281

Sofa five Seater FD-281

Almirah Medium steel with Shelves FD-243/350/ 1032/1034

S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed to Almirah Medium steel with Shelves, rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs locking device 1st quality brass 6 lever locks with duplicate keys chromium plated to Almirah Medium steel with Shelves , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs legs of Almirah Medium steel with Shelves and providing new by welding made out of 18 gauge MS Sheet into required shape for steel almirah , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs shelves for Almirah Medium steel with Shelves with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer,as directed by Engr-in-Charge.

Almirah Large steel FD-67(M)/1031/ 351, FD/E6/MAP/18 /TP

S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed to Almirah Large steel , rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs locking device 1st quality brass 6 lever locks with duplicate keys chromium plated to Almirah Large steel , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs legs of Almirah Large steel and providing new by welding made out of 18 gauge MS Sheet into required shape for steel almirah , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs shelves for Almirah Large steel with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer,as directed by Engr-in-Charge.

Locker Steel FD-1029/257

S&F in repair to leg made out of 20 guage MS Sheet complete including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Taking down unserviceable MS butt Hinges and S&F new MS butt Hinges 75mm long

Taking down unserviceable Chromium plated Steel Handle 100mm long and S&F of new one

Taking down unserviceable S&F 75mm haps & stapple and S&F of new one with rivert

Taking down unserviceable and S&F new Hanging Rod of 1.6mm thick chromium plated MS Rod

M & L for spot welding of broken joints 25mm to 75mm long of Locker Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer complete, as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer,as directed by Engr-in-Charge.

TABLE DINING OR's FD-165(M)

Taking down Top of Table dining OR and replacement with S&F of top made of 18/19 mm thick MDF board of size 1900 mm x 685 mm covered with aluminium sheet 22 guage on top complete all as specified and fixed with frame with machine screws, as directed by Engineer-in-Charge

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer,as directed by Engr-in-Charge.

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of black synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Chair Tubular Steel with Arms FD-75 (M)

Repairs to chair tubular steel with arms by removing all old paint by scrapping down and carrying out repairs such as removing dents, necessary welding wherever required and providing new hard rubber shoes and applying two coat of Olive Green synthetic enamel paint over a coat of primer after preparation of steel surfaces. Flat iron strips 20mm x 3mm, two in numbers en each seat and back, shall be welded to frame of chair rest all as shown on drg and as directed by Engr-in-Charge.

Repairs/ replacement of seat frame made out of IInd class hard wood ( Shisham) 35x25mm size duly black painted and caned Godrej pattern for tubular steel chair CB with arms , rest all as shown on drg and as directed by Engr-in-Charge.

Repairs/ replacement of back rest frame made out of IInd class hard wood (Shisham) 35x25mm size duly black painted and caned Godrej pattern for tubular steel chair CB with arms rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of hand rest (Godrej pattern) duly painted with black enamel paint as per existing size for tubular steel chair CBA with arms rest all as shown on drg and as directed by Engr-in-Charge.

Chair Tubular Steel without Arms FD-75 (M)

Repairs to chair tubular steel without arms by removing all old paint by scrapping down and carrying out repairs such as removing dents, necessary welding wherever required and providing new hard rubber shoes and applying two coat of Olive Green synthetic enamel paint over a coat of primer after preparation of steel surfaces. Flat iron strips 20mm x 3mm, two in numbers en each seat and back, shall be welded to frame of chair rest all as shown on drg and as directed by Engr-in-Charge.

Repairs/ replacement of seat frame made out of IInd class hard wood ( Shisham ) 35x25mm size duly black painted and caned Godrej pattern for tubular steel chair CB without arms rest all as shown on drg and as directed by Engr-in-Charge.

Repairs/ replacement of back rest frame made out of hard wood (Shisham) 35x25mm size duly black painted and caned Godrej pattern for tubular steel chair CB without arms rest all as shown on drg and as directed by Engr-in-Charge.

Side Rack with trays steel FD- 97 (M)/1023

S&F in repairs of shelves for Side Rack with trays steel, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer, including replacing of hard rubber toes etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Office Clerk Steel FD-1004//84 (M)

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Clerk Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs top of Table office clerk steel top with 18mm thick prelaminated MDF board all the four edges provided with 4mm thick first class teak/paduak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

S & F MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-board, as per approved sample & as directed by Engr-in-charge.

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Olive Green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, including replacing of hard rubber toes etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Office Officers Steel FD-1003/84 (M)

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office officers Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs top of Table office officers steel top with 18mm thick prelaminated MDF board all the four edges provided with 4mm thick first class teak/paduak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

S & F MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-board, as per approved sample & as directed by Engr-in-charge.

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Olive Green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, including replacing of hard rubber toes etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table steel (900x600x760)mm FD-1007/1008

S&F in repairs top of Table steel (900x600x760)mm top with 18mm thick prelaminated MDF board provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Olive Green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to leg Made out of square pipe 25mm square pipe 16 gauge including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer, including replacing of hard rubber toes etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table steel (900x900x760)mm FD-1009

S&F in repairs top of Table steel (900x900x760)mm top with 18mm thick prelaminated MDF board provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Olive Green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to leg Made out of square pipe 25mm square pipe 16 gauge including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer, including replacing of hard rubber toes etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Charpoy folding with plywood top FD-388 (R)

S&F in repairs to plywood top 8 mm thick BWP Grade-I ply, duly fixed to both partitions of top with screws of Charpoy folding with plywood top , rest all as shown on drg and as directed by Engr-in-Charge. Note: Make of plywood should be Century/ Archid ply/ Green ply or equivalent

S&F in repair to 25 mm dia (16 gauge) MS conduit pipe of required length to be fixed after with and including dismantling the damaged part of frame carefully without disturbing the adjoining parts of Charpoy folding with plywood top, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel Olive green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Charpoy GI pipe with plywood top FD-220

S&F in repairs to plywood top 12 mm thick BWR Grade-I ply, duly fixed with screws of Charpoy GI pipe with plywood top , rest all as shown on drg and as directed by Engr-in-Charge. Note: Make of plywood should be Century/ Archid ply/ Green ply or equivalent

S&F and replacement of 3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams

S&F and replacement of Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams

S&F, replacement of unserviceable Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed and shown on drawing

Replacement of unserviceable Short rail by converting retrieved Long rail, Item No 40.04 above incl cutting, threading as required and directed and shown on drawing

Replacement of unserviceable Leg by converteing retrieved Short rail, Item No 40.05 above incl cutting, threading as required and and directed

Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail

Charpoy with hardtop FD/MAP-II/01

S&F in repairs to plywood top 12 mm thick BWR Grade-I ply, duly fixed with screws of Charpoy with hardtop , rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel black paint over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Taking down unserviceable rubber shoe from Charpoy IP hardtop and S&F new hard rubber shoe

Teapoy Verandha FD-383

S&F in repairs to top of Teapoy Verandah with 18mm thick prelaminated MDF board all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer, including replacing of hard rubber toes etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Chair writing (174) FD/E6/MAP/12 & TP

S&F in repairs to leathertte cloth (rate should not be lower than Rs 450 per RM) for seat and back of approved shade of Chair writing after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge. Note : Seat and back should be provided with lipping and transparent plastic dust sheet cover

S&F in repairs to Polyurethane foam of 50 mm thick of density 32 best quality for seat and back of Chair writing after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

S&F in repairs to arm rest of Chair writing after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

Removal of existing worn out painting from exposed metal surfaces including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint black color over a coat of red oxide primer and S&F nylon buffers, rest all as directed by Engr-in-Charge.

Chair School with hand board FD/E6/MAP/05

S&F for PVC trough seat made of 4mm thick with 4x10 mm ribs moulded integrally and the same to be fitted to the frame with Aluminum alloy screws after with and including removing faded/broken seat for Chair school with Hand board, rest all as directed by Engr-in-Charge.

S&F for 18 mm thick pre-laminated MFD board of exterior grade OSD and edges with 1.5 mm thick PVC edging as hand board after with and including removing of old unserviceable Hand board for Chair school with Hand board, rest all as directed by Engr-in-Charge.

S&F for Welding the disjointed MS plain bar shelf under the seat wherever required for Chair school with Hand board, rest all as directed by Engr-in-Charge.

S&F for Painting the Steel frame of chair with two coats of black synthetic enamel paint over a coat of Red oxide primer along with PVC shoe for Chair school with Hand board, rest all as directed by Engr-in-Charge.

Bed Hard Steel FD/E6/MAP/08

S&F in repairs to head board made out of 18mm thick prelaminated MDF Board both side teak facing (ext grade) of Bed Hard Steel, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to foot board made out of 18mm thick prelaminated MDF board both side teak facing (ext grade) of Bed Hard Steel, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to PVC shoe of Bed Hard Steel , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to plywood top 12 mm thick BWR Grade-I ply in one piece, duly fixed with screws of Bed Hard Steel , rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel black paint over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Book shelf open large steel FD- 69

S&F in repairs to shelves made of 1.25 mm thick MS sheet made to shape of Book shelf open large steel , rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Book shelf open small steel FD- 69

S&F in repairs to shelves made of 1.25 mm thick MS sheet made to shape of Book shelf open small steel , rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Chair computer/ chair revolving FD/E6/MAP/01 & TP

S&F in repairs to nylon twin castor wheel of size 50mm dia as per sample of Chair computer/ chair revolving high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

S&F in repairs to 26" padestal assembly made of Statinless Steel of Chair computer/ chair revolving high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

S&F in repairs to Polyurethane foam of 50 mm thick of density 40 best quality maintaining contour for seat and back of Chair computer/ chair revolving duly covered with leathertte cloth (rate should not be lower than Rs 450 per RM) after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

S&F in repairs to gas lift rod of Chair computer/ chair revolving high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

S&F in repairs to arm rest of Chair computer/ chair revolving high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

S&F in repairs to tilt & lift mechanism assembly of Chair computer/ chair revolving high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

S&F in repairs to high quality plastic tower belly of Chair computer/ chair revolving high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, rest all as directed by Engr-in-Charge.

Table Computer FD/E6/MAP/03 / & TP

S&F in repairs of 18mm pre-laminated MDF board (900x600mm) for table top with 4mm wood beading duly polished of Table Computer , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs of new powder coated telescopic steel channel in black paint for key board plank of Table Computer , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs of 18mm pre-laminated MDF board for keyboard tray with matching PVC edging all around of Table Computer, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint black paint over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Chair Verandah FD-359 /259 /256

Removal of unserviceable rubber shoe and cane from Chair Verandah scraping existing paint from frame with emery paper and M & L for painting with two coats of synthetic enamel paint white colour over a coat of red oxide primer and M & L for recanning seat and back of chair with white or cream ivory plastic cane 4mm wide, including replacing of hard rubber toes complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to 20 mm dia (16 gauge) MS conduit pipe of required length to be fixed after with and including dismantling the damaged part of frame carefully without disturbing the adjoining parts of Chair Verandah, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to 10 mm dia MS rod of required length to be fixed after with and including dismantling the damaged part of frame carefully without disturbing the adjoining parts of Chair Verandah, rest all as shown on drg and as directed by Engr-in-Charge.

Deduct Schedule of Credit of Rs. (-) 59247.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

DEV RAJ MAGOTRA (BID ID -3334194)

M/S SHARMA TRADERS (BID ID -3324911)

PUSHPAK INDUSTRIES (BID ID -3325399)

VEE KAY IND (BID ID -3320408)