Repairs/Overhauling/Servicing of Truck (Eicher) JKO1P-1707)

Amount

Servicing of locomotive engine by way of Providing & filling of engine oil (15 Lit) (Shell/Castrol/Mobil/ /reputed make), and fitting of new oil filter (01 No.), Bye pass filter (01 No.) Diesel Filter (02 No’s) and Air filter big (01 No.). The job includes draining out the old Engine Oil from the engine and filling of fresh oil up to the desired level.

Providing & filling of Differential oil (10 Lit), Gear Oil (06 Litres); the job includes draining out the old oil and filling of fresh oil up to the desired level.

Complete four wheel checking by :

Servicing of the wheel hub assemblies of the locomotive by way washing/cleaning with diesel, also included in the job is greasing of the wheel hub assemblies.

P/F of new bearings front and rear after removal of damaged ones

P/F of new brake shoes front and rear after removal of worn out ones.

P/F of new oil seals (front) after removal of worn outs

P/F of new oil seals (rear inner) after removal of worn out ones

P/F of new oil seals (rear outer) after removal of worn outs.

P/F of Brake Adjuster after removal of worn outs.

Labour charges for above mentioned works (1-7)

Repairs to braking system of the truck by way of replacement of old and worn parts with new ones as mentioned below

Servo booster kit ( Rear)

Servo booster kit ( Front)

Valve booster

DDU Kit for braking System

Repairs to the suspension system of the locomotive by way of dismantling of the all the four leaf springs, then re-tensioning of leaf springs, refitting/testing of the leaf springs after P/F of new center bolts (04), U-clamps (08) bushing sets (04), washers, pins and clamps etc.

Repairs to the transmission system by way P/F of new clutch assembly (with pressure plate, clutch bearing) complete in all respects to the vehicle, after dismantling of the old damaged clutch assembly. The job includes all allied fittings required as per the job during the installation of new clutch assembly to be followed by testing the system for the desirable performance.

P/F of new flywheel assembly complete with bearing by way of replacement of old and worn-out one. The job further includes testing the assembly for the desirable performance.

Replacement of the tie rod ends with the new ends. The job includes dismantling of the old worn out ends and replacing them with the new ones compatible to the vehicle. The job further includes complete testing for satisfactory performance of the vehicle after replacing the tie rod ends.

P/F of new universal joint by way of replacement of old and damaged one The job further includes testing the new joint on full load for the successful performance.

Complete servicing of the self/dynamo assembly; The job includes all allied fittings which may be required during the execution of work.

Restoration of electrical system of the vehicle by way replacement of old battery with the new one having following specifications of 130AH, 12 Volt with minimum 03 years warranty. The job also includes P/F of new cable terminal kit.

M/S DIAMOND AUTOMOBILES