Construction work of Hamirpur- Rath- Garautha- Gursarai- Jhansi Road (SH-42) (Missing Link) from Chainage 74.550 to 110.360 in District- Jhansi and Hamirpur

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-01 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-03 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. (Compaction only) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-05 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (For 3 Km Cartage) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow areas all complete as per drawing and Technical Specification clause 305. (For 3 Km Cartage) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-08 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Cement Treated Crushed Rock or combination as per clause 403 and table 400.4in Sub base/ Base 2% Cement (CTSB) Providing, laying and spreading Material on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base. as per drawing and Technical Specification clause 401. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-10 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Cement Treated Crushed Rock or combination as per clause 403 and table 400.4in Sub base/ Base (4% Cement (CTB)) Providing, laying and spreading Material on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-12 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Clause 406. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-14 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-16 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous VG-40 binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-18 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Tack Coat on Bituminous surfaces Providing and applying tack coat with VG-10 at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-20 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous VG-40 binder @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Grade-I) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-22 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-24 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Sand Filling in Foundation Trenches as per Drawing & Technical Specification (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-26 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-28 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Brick masonry work in cement motar 1:3 in sub structure complete excluding pointing and plastering as per drawing and technical specifications. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-30 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Supply and laying 1000 mm dia NP-3 Hume pipe SI No- Chp 1 new item (1) and Chp 18 Item no 1(5) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-32 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Plastering with Cement Mortar (1:3) on brick work in sub-structure as per Technical Specifications. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-34 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15 (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-36 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-38 (Part-B District - Jhansi Ch. 98.000 to 110.360)

RCC Grade M30 Foundation RCC Grade M30 using batching plant transit mixer & Concrete pump (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-40 (Part-B District - Jhansi Ch. 98.000 to 110.360)

PCC Grade M20 PCC Grade M20 using batching plant transit mixer & Concrete pump (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-42 (Part-B District - Jhansi Ch. 98.000 to 110.360)

RCC Grade M30 Wall & Slab RCC Grade M30 using batching plant transit mixer & Concrete pump (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-44 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing, fitting and placing in position HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specification section 1600. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

RCC Grade M40 using batching plant transit mixer & Concrete pump (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-47 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-49 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-51 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-53 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and painting with Synthetic enamel paints of approved quality on bridges with bridge no. and span arrangements as per IRC - 7, 1971 . (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-56 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-58 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying of hot thermoplastic compound 2.5 mm thick including reflect rising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC-35 the finished surface to be level uniform and free sleek and holes, Zebra Line (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-60 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Stop Board (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-62 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying of hot thermoplastic compound 5mm thick including reflect rising glass beads @ 250gms per sqm area thickness of 5mm is exclusive of surface applied glass beads as per IRC-35 the finished surface to be level uniform and free sleek and holes. (Repeated bars in Abadi Portion) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-64 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Supply of Retro Reflective Sign Board size 1200x900mm made of 2mm alloy aluminium sheet and 4mm thick APC sheet fully covered with intensity retro reflective sheet having approved massage fully proceed by AVERY DENSION CO (U.S.A.) equivalent equipment as per specified brand back of aluminium sheet will be provided frame 35x35x5mm angle iron aluminium sheet painted with two coat smoke grey or sky blue paint leg 75x40mm channel 3 mtr long complete. (Size 1200x900mm) (Both Side 1.08 sqm mtr) TRAFFIC SIGNS - MAXIMUM SPEED LIMIT (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-66 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing HAZARD MARKER (LEFT & Right) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-68 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing SINGLE CHEVRON (NORMAL) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-70 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Direction and place Identification signs up to 0.90 sqm size Board Village Board Providing and erecting direction and place identification retró-reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection. daytime colour and luminance, shrinkage flexibility liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government/Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4858-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.37 Sheet fixed over aluminum sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild, steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-13 grade cement concrete 45x45x60 cm. below ground level as per approved drawing, complete. Abadi Board (S.Item No.19- Morth-801 8.5) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-72 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Supply of Retro Reflective Sign Board size 1200x900mm made of 2mm alloy aluminium sheet and 4mm thick APC sheet fully covered with intensity retro reflective sheet having approved massage fully proceed by AVERY DENSION CO (U.S.A.) equivalent equipment as per specified brand back of aluminium sheet will be provided frame 35x35x5mm angle iron aluminium sheet painted with two coat smoke grey or sky blue paint leg 75x40mm channel 3 mtr long complete. (Size 1200x900mm) (Both Side 1.08 sqm mtr) TRAFFIC SIGNS - T Board (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-74 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing retro reflective delinator post IZ-ASTMAD 45604 made of 75 mm dia round pipe of 1.20 mtr height with fixing support of flat iron 25x 25 mm retro reflective strip 4 no fixed round side of the post electric welded and coveres with jali and painted with black paint including GST and all other taxes and cartage complete with fixing at side as per direction of E/I. (S.I.-1 Morth-805(8.15) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-76 (Part-B District - Jhansi Ch. 98.000 to 110.360)

12 m – 15 m Span Over Head Structure with 300 dia M S two vertical post Supply, fixing & erection of built up Overhead Structure of 12m-15m span comprising of two vertical posts of 6.00 m height made up to 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal truss shall comprise of 50 mm dia heavy class M. S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick lean concrete 1:3:6 (Cement coarse sand and 40 mm gauge stone ballast and RCC M-25 cement concrete including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2012 complete in all respect. The rates shall include cost of design, fabrication, supply, transportations, local, shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-78 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing School Board (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-80 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Junction Board (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-82 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Y-Board (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-84 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of averry dennision/3 M Brand RPM serie 290(CAT Eye) (RED/ YELLOW COLOUR) Made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflective in wet and Dry conditio with bitumen adhesive BT 69. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-86 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered,LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical directed by the engineer. (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-88 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying Bituminous Concrete for Hump including tack coat complete as per drawing and Technical specification clause 507. (Grade-II) (Part-B District - Jhansi Ch. 98.000 to 110.360)

Bituminous Concrete Grading 2 Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous VG-40 binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method and compacting with vibratory roller to achieve the desired density, all complete as per clause 401 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Plain/Reinforced Cement Concrete for wall and slab etc. complete as per Drawing and Technical Specifications RCC Grade M35 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Painting two coats after filling the surface with synthetic enamel paint bridge No. and span arrangements as per as directed by Engineer. (Part-B District - Jhansi Ch. 98.000 to 110.360)

Asphaltic Plug expansion join (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing in position drainage spouts complete as per drawing and Technical Specification Clause 2705 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying pitching on slopes laid over prepared filter material complete as per drawing and Technical specification clause 2504. (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification clause 2504. (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of Median and Island with Soil Taken from Borrow Areas Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing Distance Indicator post including painting and printing etc all complete as per drawing and Technical Specification clause 805. 5th Km stone (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing Distance Indicator post including painting and printing etc all complete as per drawing and Technical Specification clause 805. Km stone (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing Distance Indicator post including painting and printing etc all complete as per drawing and Technical Specification clause 805. Hectometer stone (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of cement concrete kerb all complete as per drawing and Technical Specification clause 408 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of channel kerb with foundation concrete all complete as per drawing and Technical Specification clause 409 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing of reflective pavement marker (RPM) for delineation for night-time visibility, all complete as per drawing and Technical Specification clause 804 (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of footpath/separator by providing compacted granular sub base as per drawing and clause 401 and precast concrete blocks complete as per drawing and Technical specification clause 410. (Part-B District - Jhansi Ch. 98.000 to 110.360)

Construction of restrainer block complete as per drawing and Technical Specification sections 1500 and 1700. (Part-B District - Jhansi Ch. 98.000 to 110.360)

Providing and fixing Road Delinators to indicate horizontal alignment complete as per drawing and Technical specification clause 806. (Part-B District - Jhansi Ch. 98.000 to 110.360)

The routine maintenance of above road work including embankment,patri,pavement, road sides and cross drains, hume pipe culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. (including cost of material T&P labour but excluding GST) for 1st year maintenance cost (0%) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-111 (Part-B District - Jhansi Ch. 98.000 to 110.360)

The routine maintenance of above road work including embankment,patri,pavement, road sides and cross drains, hume pipe culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. (including cost of material T&P labour but excluding GST) for 2nd year maintenance cost (0.25% Construction Cost) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-113 (Part-B District - Jhansi Ch. 98.000 to 110.360)

The routine maintenance of above road work including embankment,patri,pavement, road sides and cross drains, hume pipe culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. (including cost of material T&P labour but excluding GST) for 3rd year maintenance cost (0.50% Construction Cost) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-115 (Part-B District - Jhansi Ch. 98.000 to 110.360)

The routine maintenance of above road work including embankment,patri,pavement, road sides and cross drains, hume pipe culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. (including cost of material T&P labour but excluding GST) for 4th year maintenance cost (0.75% Construction Cost) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-117 (Part-B District - Jhansi Ch. 98.000 to 110.360)

The routine maintenance of above road work including embankment,patri,pavement, road sides and cross drains, hume pipe culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. (including cost of material T&P labour but excluding GST) for 5th year maintenance cost (1% Construction Cost) (Part-A District- Hamirpur Ch. 74.550 to 98.000)

Same As Above Item No.-119 (Part-B District - Jhansi Ch. 98.000 to 110.360)