SR TO FLOORING, JOINERIES AND EXTERNAL PLASTERING IN BUILDING NO. P-38 AND P-39 AT AF STN KANHERI HILLS AND CERTAIN LBW AND MAJOR REVENUE WORK AT AFS KANHERI HILLLS UNDER GE AF THANE

Amount

Surface excavation n.exc 30cm deep and averaging 15 deep and getting out in soft/loose soil complete all as specified.

M&L Hardcore of guage n.exc 63mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface in broken bricks all as specified and directed.

M&L for PCC 1:4:8 (using 40 mm graded stone aggregate) type D2 as in foundation and sub base etc complete all as specified and directed.

M&L for chequered cement concrete tiles (reflective type) with mixture of white and grey cement in equal proportion and no pigments of size 30cmx30cmx25 mm thick, set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and diected.

M&L for stone dust layed in floors or paving etc spread, levelled and rammed including watering complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type) in any shape and size confirming to IS-15658-2006 of 80 mm thickness M-40 grade as specified and directed.

M&L for Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, benching and similar work including necessary form work complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil as specified and directed.

M&L for Walling of random or polygonal rubble, brought up to coursed, well bounded, bedded and solidly hearted, built in CM 1:6. all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone ,complete all as specified and directed.

M&L for Raised pointing to Random Rubble masonry in CM 1:4 ,complete all as specified and directed.

M&L for providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in PCC bonders set in CM 1:6 all as specified and directed.

M&L for Boulder filling dry hand packed tightly as in back of wall ,complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and set in CM 1:6 ,complete as specified and directed

M&L for rendering on fair faces of brick work or block masonary surfaces 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement c,omplete all as specified and directed

M&L for Reinforced concrete pipes, class NP2 for 600 mm bore dia, laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints jointed set in CM 1:4 complete with collars including testing ,complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches ,complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash ,complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft / loose soil ,complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point where directed ,complete all as specified and directed.

Demolition of brickwork/stone masonry/ concrete masonry built in cement mortar including all quoins, arches, pillars, etc, but exdcluding ashlar facings, dressed stonework and precast concrete articals,complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete, all as specified and directed..

M&L for Providing precast cement concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) louvers and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame set in cm 1:4 complete all as specified and directed.

Rendering on fair faces of brick work or block masonary surfaces 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed

M&L for 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed

M&L for glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

M&L for Plain Cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregate in surface channels and drains as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub-floors, sub-bases, floors and pavings, etc. ,complete all as specified and directed.

S&F Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290(Gde E-165) ,complete all as specified and directed.

M&L for steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240,complete all as specified and directed.

S&F Mild steel flat iron fillets, wind ties,etc including cutting tops to shape as directed, drilling holes, notching for securing sheet, wire mesh etc.including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed.

S&F Polycarbonate sheets of superior quality 6.00 mm thick in semi circle shape on roofs/wall cladding of desired colour and fixed with aluminium metal flat/angle/tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make ,complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering ,complete all as specified and directed.

M&L for Cutting into existing wall/manhole for connecting new drain pipe of 110 mm dia pipe including making good to disturbed portion with benching and hunching , plaster etc and forming new branch channel (1/2 round of 3/4 section) if required in cement concrete 1:2:4 type B-1 and smooth finished, reforming benching ,complete all as specified and directed.

M&L for Mild Steel TMT bars as in reinforcement 10 mm dia and above cut to length bent to shape as reqd etc and over cut to length bent to shape, required including cranking benchings spirally hooping for colums hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia ,complete all as specified and directed.

M&L for precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs for man holes etc set in cement mortar 1:4 including necessary form work ,complete all as specified and directed.

M&L for Reinforced concrete pipes, class NP2, for 200 mm bore dia, laid and jointed set in CM 1:4 complete with collars including testing ,complete all as specified and directed.

M&L for concrete bed to 200mm dia drain pipes in cement concrete 1:3:6 type C-2 including packing under, and haunching against the sides of pipes after they are laid and tested ,complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or grith applying two coat of synthetic enamel paint over a coat of red-oxide primer ,complete all as specified and directed.

M&L 75mm thick cement concrete type C2 1:3:6 as in plinth protection incl necessary form work finished even & smooth without using extra cement ,complete all as specified and directed.

M&L for Preparing new plastered surfaces of wall and applying two coats of cement based paint exterior grade ,complete all as specified and directed.

Taking down cement plaster any description etc incl racking out joints, hacking for key scrubbing down with water etc ,complete all as specified and directed.

Demolition/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 ,complete all as specified and directed.

M&L for Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No.44.00, here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified & as directed. (water proofing compound shall be measured and paid seperately)

Supply only Solvant free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PEDILITE

Material & labour for providing reinforced cement concrete (1:1½: 3) type B0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture CONPLAST X421IC (Fosroc) or equivalent as per manufactures instructions as in columns, pillars,lintel, slab supported walls roof, landings, balconises, canopies, deck slabs, Chajjas shelves, Fins, fascias, louvres, parapets, and railings, newels, balustrade, and the like etc including necessary form work and scaffoldings up to 2 story of building ,complete all as specified & as directed.

M & L for rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat in cement mortor 1:6 and 5mm thick finishing coat in cement mortor 1:4) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) ,complete all as specified & as directed.

Supply only Liquid water proofing compound ,complete all as specified & as directed.

Rendering 5mm thick in CM 1:4 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement ,complete all as specified & as directed.

Rendering 5mm thick in CM 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement ,complete all as specified & as directed.

M&L for preparing new plastered surfaces and applying two coat of OBD over a coat of alkali resistant priming paint ,complete all as specified & as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces,complete all as specified & as directed.

M&L for Preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for complete preparation of existing treatment on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat of distemper oil-emulsion on walls,complete all as specified & as directed.

M&L for preparation of old decorated cement plastered surfaces of ceiling and applying of one coat of white wash ,complete all as specified & as directed.

M&L preparation of old painted steel surface & applying a coat of synthetic enamel paint ,complete all as specified & as directed.

Taking down chowkats or frames with shutters (without taking off shutters form frame) . exc 1.5 sqm & n.exc 4 sqm each ,complete all as specified & as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and removing to store ,complete all as specified & as directed.

Taking down chowkats or frames with shutters (without taking off shutters form frame) n. exc 1.5 sqm each ,complete all as specified & as directed.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified & as directed.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated ,complete all as specified & as directed.

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats as specified and directed.

M&L for 25 x 3mm FI holdfasts for fixing door frame ,complete all as specified & as directed.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc ,complete all as specified & as directed.

M&L for preparation of old wooden surfaces of any description over 10cm width & girth not otherwise described and applying a coat of synthetic enamel paint ,complete all as specified & as directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples ,complete all as specified & as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm length and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ,complete all as specified & as directed.

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long ,complete all as specified & as directed.

S&F Floor door stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,complete all as specified & as directed.

S&F extruded aluninum alloy handles, fabricated type anodized 150mm long ,complete all as specified & as directed.

S&F butt hinges, medium weight, cold rolled mild steel, of size 100mm ,complete all as specified & as directed.

S&F mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate,complete all as specified & as directed.

Hacking out old broken glass (any thickness, size, quality or description) from aluminium/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm ,complete all as specified & as directed.

S&F sheet glass ordinary quality 3.00mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane ,complete all as specified & as directed.

S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane ,complete all as specified & as directed.

S&F aluminium anodised powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. ,complete all as specified & as directed.

S&F for providing and fixing zinc alloy roller for sliding window/ aluminium sections with necessary screws etc. ,complete all as specified & as directed.

S&F for Zinc alloy (powder coated) casement lock for windows with necessary screws etc ,complete all as specified & as directed.

Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm ,complete all as specified & as directed.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening with stainless steel screws of required size complete all as specified and directed.

S&f factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. Including 3 Nos of stainless steel 100 mm size hinges, 2 Nos of aluminium 100 mm size handles, 2 Nos of aluminium tower bolt 100 mm size,complete all as specified & as directed.

Dismantling water tank capacity exc 500 and n exc 1000 ltr and removing to store ,complete all as specified & as directed.

S&F1000 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position ,complete all as specified & as directed.

S&F in repair 20mm Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min. weight 20mm-210gms) ,complete all as specified & as directed.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed ,complete all as specified & as directed.

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 15mm bore of pipe all as specified and directed.

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 20mm bore of pipe all as specified and directed.

M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors all as specified and directed.

M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors all as specified and directed.

Dismantling cast iron drain pipes of any description complete all as specified and as directed.

S&F of 100 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

S&F of 75 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

S&F of 100 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors with MS clamp complete all as specified and as directed.

S&F of 75 mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

M&L for Cutting holes into or through cement concrete slabs, chajjas, etc.of superfacial area n.exc 100 sqcm for inserting pipe as in sunken portion to faciliatate efficient drainage including packing with PCC 1:3:6 after inserting pipe, complete all as specified and as directed .

S&F of 50mm GI pipe, medium grade in isolated length of 400mm long inserting into wall surfaces with 100mm projecting from the external face of wall as in water draining spout ,complete all as specified and directed.

S&F of Cast Iron floor trap, 75mm dia out let with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 including taking down old floor trap complete all as specified and as directed .

S&F of PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement ,complete all as specified & as directed.

S&F of CI bends of 100mm dia fitted with oval access doors ,complete all as specified & as directed.

S&F of CI bends of 75 mm dia fitted with oval access doors ,complete all as specified and as directed .

S&F of CI branch pieces "T" or "Y" type 100mm dia, complete all as specified and as directed.

S&F of CI branch pieces "T" or "Y" type 75 mm dia , complete all as specified and as directed.

S&F in repair CI cowl of 100mm dia, complete all as specified and as directed.

S&F in repair CI cowl of 75 mm dia ,complete all as specified and as directed.

S&F in repair cast iron Nahani trap of 100mm dia including jointing to waste pipe fixed in cement concrete type 1:2:4 type B1,complete all as specified & as directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish of the premises ,complete all as specified & as directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 for laying floor finishes ,complete all as specified & as directed.

M&L for non-skid white/ivory ceramic tiles 8 to 10 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6), complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 8 to10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:4 for laying floor finishes, complete all as specified and directed

Material and labour for Vitrified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical position as dado/skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thck in CM 1:4 as backing coat to receive tiles in vertical position ,complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided all as specified and directed by Engr in Charge.

M&L for 50 mm thick PCC type C-2, 1:3:6 using 40mm graded stone aggregate as in plinth protection finishing surfaces of concrete even and fair (without using extra cement), complete all as specified and directed.

Vinod Enterprises

Shree Gajanan Enterprises