Different maintenance works under Annual maintenance

Amount

safe carriage, loading and unloading of following material from ESC Daliganj Lucknow in work site J.E. dump store

PCC Pole 8.5/9 Mtr long.

S.T.P. Pole 9/11 Mtr. Long

Fabrication and erection of missing/damaged wire mesh fencing 02 Mtr. Height with a gate and with retaining grouting of Fabrication M.S. Angle 65x65x6 mm support (05 Nos. in a Sub- Station). Palinthing of fencing/support with all material as per specification/drawing complete in all respect.

Construction of Damaged part of masonry transformer Plinth of size as per required at site to maintain the height of 1.5M with brick cement coarse sand and brick ballast, filling of sand in the hallow space. Plastering of surface in ratio 1:4:5 and top of the plinth 4 thinkness concealing. (All material, Labour And T&P will be provided by the contractor

Repairing of damage/Rusted Steel Tubular Pole by digging of pit up to2 for proper position, Putting 3 Nos. Angle From of size 35x35x6 mm, 3 Long properly welding on 3 circle with pole than Grouting and Plinthing 300 mm Above level with cement concrete and sand and bricks ballast, (All material, labour and T&P will be provided by the Contractor)

Construction of masonry type transformer plinth of size 2x2x1.5 M with brick, Cement, coarse sand , sand & brick ballast, filling of sand in the hallow space plastering outer surface in ratio 1:4;6 top of the plinth 4 thickness grouting of 2 nos. MS Channel of size 100x50x2000mm on the top of the plinth for placement of transformer (All the Material will be arranged by the contractor at his own cost)

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity.(Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

Supply Of Fixing of Henley type taleless fuse unit on LT distribution pilled box with Clamping of lug required size of side in LT PVC cable

500Amp / 600 Volts

300 Amp / 650 Volts

Re sagging of L.T, O/H, ABC Line, opening of ABC at service point from distribution box and opening of Consumer service cable after Re-sagging of ABC Re Connection of Consumer Service cable on ST Pole/PCC . (All the material will be arranged by the Contractor)

Supply and Fixing of Cu L Piece of size 300x65x6 mm 400/250 KVA L/T Bushing Rod for proper Connection of LT cable. (All the material will be arranged by the contractor)

Re sagging of L.T/H.T. line along with spare parts for various spans

Disconnection and reconnection of consumer service Cable.

Installation of D.O. arrangement including mounting of clamps with nuts & bolt, 11 KV Pin insulator with pin (All material will be provided by the contractor)

Cutting & Chopping tree branches for clearence of HT Line

Proper dressing of LT and 11 KV cable of 11/0.4 S/S with fixing accessories

Cleaning of 11/0.4 KV S/s removed of garbage dump and stacking it out side the fencing area

Checking of oil in Transformer

Replacement Of LT Cable lead wherever ( Required Material provided by Deppt.)

Removing of oil leakage in Transformer

Replacement of burnet jumpers of LT Line.

Replacement of burnt jumpers of HT Line.

Cleaning of switch yard of 33/11 KV Line

Replacement of Disc insulator & insulator in 11 KV Line

Cleaning of 33/11 KV Substation

Attending Breakdown of 33 Kv Line ( By opening & Closing of cable at deferent exposures.)

Attending Breakdown of 11 Kv Feeder ( By opening & Closing of cable at different exposures.)

Providing and fixing of guarding angle on existing 11 KV support with clamp nut bolts.

Cradle guarding of HT Line by GI span wire. GI wire Supplied by contractor

Replacement of damaged LT Cable box 3.5x240 Sqmm/3.5x400 Sqmm

Replacement of MCB in underground cable system (250A/400A/630A)

Tightening of Bus bar of LT Compartment

Lug punching with replacement of damaged Lugs with nut & bolt in LT Compartment of CSS.

All taxes applicable sjall bw paid time to time extra

M/S V.K ENTERPRISES

S M ENTERPRISES