NIT NO: 1079/TC/2026-27

NIt schedule FOR CONSTRUCTION OF 50 SEATED BOY HOSTEL , ""F""- TYPE QTR. FOR SUPERINTENDENT, VISITORS & GUARD ROOM BOUNDARY WALL I/C ELECTRIFICATION, WATER SUPPLY & SANITARY FITTINGS AND B.T. APPROACH ROAD GOVT.POLITECHNIC AT SUKMA (C.G.)"

P.a.c. 208.72 Lacs

S.No. Dept. SOR Year S.O.R. ITEM No. Particular's Of Items Unit Qty. Rate Amount Ref Serial No CREDIT ITEM (0/1) Calc Field(Y/N)

1 PWD Building 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). sqm 3000.00 7.20 21600 0 0 0

2 PWD Building 2015 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1 In all types of soil cum 1008.91 185.00 186649 0 0 0

3 PWD Building 2015 1.6 Extra for every additional lift of 1.5 m or part thereof. 1.6.1 All types of soils cum 214.41 26.50 5682 0 0 0

4 PWD Building 2015 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 139.30 2970.00 413732 0 0 0

5 PWD Building 2015 3.1.4 3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). cum 21.00 3552.00 74592 0 0 0

6 PWD Building 2015 1.25 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) cum 411.89 27.50 11327 0 0 0

7 PWD Building 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 239.88 4163.00 998616 0 0 0

8 PWD Building 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 185.30 4260.50 789463 0 0 0

9 PWD Building 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 88.65 4358.00 386345 0 0 0

10 PWD Building 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 62.74 4455.50 279520 0 0 0

11 PWD Building 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 9.33 4553.00 42469 0 0 0

12 PWD Building 2015 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in all complete: 3.12.1 Thermo-Mechanically treated bars FE 415 kg 56599.14 54.50 3084653 0 0 0

13 PWD Building 2015 2.1 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: 2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 1227.10 139.00 170567 0 0 0

14 PWD Building 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 1063.57 202.00 214842 0 0 0

15 PWD Building 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 1261.59 297.00 374693 0 0 0

16 PWD Building 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 83.97 230.00 19313 0 0 0

17 PWD Building 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 1191.05 235.00 279896 0 0 0

18 PWD Building 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 195.87 294.00 57585 0 0 0

19 PWD Building 2015 2.1.4 Edge of slab, breaks in floor and walls upto 200mm metre 222.20 34.00 7555 0 0 0

20 PWD Building 2015 2.1.3 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. sqm 5.56 184.00 1023 0 0 0

21 PWD Building 2015 2.3 Extra for providing fixing and removing of propping from lower floor upwards for the concreting. Propping should be provided two floors below. The props of lower floor must be 50% of the props of the floor above including wedging etc. complete. In case propping is done in one floor below, only half the rate shall be paid. sqm 260.26 17.00 4424 0 0 0

22 PWD Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) sqm 135.08 3263.00 440776 0 0 0

23 PWD Building 2015 4.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom, kitchen etc., by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation: i) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm This layer will be allowed to air cure for 4 hours. ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. sqm 182.00 sqm 90.53 182.00 16476 0 0 0

24 PWD Building 2015 13.24.2 Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. Both side polished sqm 121.26 414.00 50202 0 0 0

25 PWD Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 1151.30 371.00 427133 0 0 0

26 PWD Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 206.88 3384.00 700078 0 0 0

27 PWD Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 84.91 3505.00 297612 0 0 0

28 PWD Building 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 89.22 3626.00 323507 0 0 0

29 PWD Building 2015 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level up to plinth level: (ii) Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 589.13 382.00 225046 0 0 0

30 PWD Building 2015 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 589.13 62.50 36820 0 0 0

31 PWD Building 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. cum cum, 0.91 4237.00 3868 0 0 0

32 PWD Building 2015 3.15 Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. sqm 18.26 93.50 1707 0 0 0

33 PWD Building 2015 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth levelexcluding cost of form work. 3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 0.45 4073.00 1845 0 0 0

34 PWD Building 2015 9.6 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 1008.42 68.00 68573 0 0 0

36 PWD Building 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat of red oxide zinc chromate primer.. kg 2179.17 67.50 147094 0 0 0

37 PWD Building 2015 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. sqm 20.61 791.00 16303 0 0 0

38 PWD Building 2015 9.13 Providing and fixing steel door with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.. kg 197.55 75.00 14816 0 0 0

39 PWD Building 2015 9.16.2 9.16 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames kg 1833.77 73.50 134782 0 0 0

40 PWD Building 2015 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge 8.148.2 Extruded section Profile size 42x50 mm. metre 109.90 196.00 21540 0 0 0

41 PWD Building 2015 8.149 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 8.149.2 30 mm thick door shutters with styles and rails of size 60x30 mm sqm 3.15 2488.00 7837 0 0 0

42 PWD Building 2015 8.13 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 8.13.2 35 mm. thick (single leaf) sqm 14.52 1370.00 19892 0 0 0

43 PWD Building 2015 8.13.5 25 mm. thick (double leaf for cupboard shutters with piano type hinges sqm 2.83 1092.00 3090 0 0 0

44 PWD Building 2015 8.56 Providing and fixing stainless steel wire mesh of average width of aperture 1.56mm with wire of dia 0.45mm to doors, windows and clerestory windows including 19x12mm teak wood beading etc. complete. sqm 204.30 649.00 132591 0 0 0

45 PWD Building 2015 9.14 Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer. kg 2885.22 79.50 229375 0 0 0

46 PWD Building 2015 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 8.12.2 35 mm. thick (single leaf) sqm 123.90 2005.00 248420 0 0 0

47 PWD Building 2015 8.15 Extra for double leaf shutter instead of single leaf. sqm 5.04 52.00 262 0 0 0

48 PWD Building 2015 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. metre 10.00 346.00 3460 0 0 0

49 PWD Building 2015 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). 8.152.2 Both side Pre-laminated panel PVC door shutter sqm 66.72 2832.00 188951 0 0 0

50 PWD Building 2015 8.99 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 8.99.1 300x16mm each 4.00 77.50 310 0 0 0

51 PWD Building 2015 8.100 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 8.100.1 300x20x6mm each 13.00 53.50 696 0 0 0

52 PWD Building 2015 8.102 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 8.102.2 200mm each 4.00 29.00 116 0 0 0

53 PWD Building 2015 8.103 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 8.103. 1 125 mm each 6.00 51.00 306 0 0 0

54 PWD Building 2015 8.106 Providing and fixing MS bright finished single hanging door stopper with necessary MS steel screws complete. each 13.00 12.50 163 0 0 0

55 PWD Building 2015 8.120.2 Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. (ii) 250x16mm each 18.00 141.00 2538 0 0 0

56 PWD Building 2015 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately) kg 119.71 338.00 40463 0 0 0

57 PWD Building 2015 9.53 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. complete. sqm 172.29 3159.00 544264 0 0 0

58 PWD Building 2015 9.55 Providing and fixing of six/seven levers branded and approved mortise lock. each 37.00 594.00 21978 0 0 0

59 PWD Building 2015 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete. each 49.00 1450.00 71050 0 0 0

60 PWD Building 2015 8.60 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 8.60.1 300x16mm each 90.00 475.00 42750 0 0 0

61 PWD Building 2015 8.61 Providing and fixing brass door latch with brass polished MS screws complete: 8.61.1 300x16x5 mm each 42.00 398.00 16716 0 0 0

62 PWD Building 2015 8.62 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 8.62.2 200x10mm each 90.00 231.00 20790 0 0 0

63 PWD Building 2015 8.65 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 8.65.1 125 mm each 104.00 55.50 5772 0 0 0

64 PWD Building 2015 8.73 Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion & brass polished MS screws etc complete to suit theshutter thickness. each 52.00 73.00 3796 0 0 0

65 PWD Building 2015 8.58 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 8.58.1 125x85x5.50 mm (Heavy Type) each 135.00 245.00 33075 0 0 0

66 PWD Building 2015 9.57 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. 9.57.1 SS Grade 204 kg 270.00 467.00 126090 0 0 0

67 PWD Building 2015 11.1 6mm thick cement plaster of mix: 11.1.2 In Cement mortar 1:4 (1 cement : 4fine sand) sqm 1159.41 87.00 100869 0 0 0

68 PWD Building 2015 11.1.1 In Cement mortar 1:3 (1 cement : 3 fine sand sqm 15.22 93.00 1415 0 0 0

69 PWD Building 2015 11.2 12mm thick cement plaster of mix: 11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 4244.57 91.50 388378 0 0 0

70 PWD Building 2015 11.2.1 In cement Mortar 1:3 (1 cement : 3 fine sand sqm 35.04 115.00 4030 0 0 0

71 PWD Building 2015 11.3 15mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 3759.25 107.00 402240 0 0 0

72 PWD Building 2015 11.33 Providing and making moulded mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: 11.33.2 18 mm thick metre 385.00 5.60 2156 0 0 0

73 PWD Building 2015 11.5 Neat Cement punning. sqm 78.00 33.00 2574 0 0 0

74 PWD Building 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer kg 8.64 43.50 376 0 0 0

75 PWD Building 2015 11.40 Making grove in cement plaster while plastering upto10 mm deep and 10 mm wide. metar 720.00 1.30 936 0 0 0

76 PWD Building 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. Complete before plastering upto 10mts in height. sqm 1074.96 86.00 92447 0 0 0

77 PWD Building 2015 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.. 12.3.2 50 mm thick sqm 15.00 254.00 3810 0 0 0

78 PWD Building 2015 12.46 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). 12.46.3 Granite stone lakha red/ shahi red sqm 67.20 4273.00 287146 0 0 0

80 PWD Building 2015 12.44 Extra for nosing in Granite stone for treads. sqm 78.48 126.00 9888 0 0 0

81 PWD Building 2015 12.46.2 Granite stone black sqm 144.32 2719.00 392401 0 0 0

82 PWD Building 2015 13.6 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 13.6.2 Granite stone black 14.55 3279.00 47709 0 0 0

83 PWD Building 2015 12.44 Extra for nosing in Granite stone for treads. sqm 43.20 126.00 5443 0 0 0

84 PWD Building 2015 8.126 Providing and fixing powder coated aluminium sliding door bolts with16mm rod, necessary M.S. nuts bolts and screws etc complete. 8.126.2 250x16mm each 11.00 150.00 1650 0 0 0

85 PWD Building 2015 8.127 8.127 Providing and fixing powder coated aluminium door latch with 12mm rod,necessary M.S. nuts bolts and screws etc complete. 8.127.2 250x12mm each each 9.00 54.50 491 0 0 0

86 PWD Building 2015 8.128 8.128 Providing and fixing powder coated aluminium tower bolts (Barrel type)with necessary M.S. screws etc complete. 8.128.2 200 x10mm each 10.00 60.00 600 0 0 0

87 PWD Building 2015 8.129 8.129 Providing and fixing powder coated aluminium door handles 2.5mm thickwith necessary M.S. screws etc complete. 8.129.1 150 mm each 20.00 32.00 640 0 0 0

88 PWD Building 2015 8.130 8.130 Providing and fixing hanging powder coated aluminium door stopper withnecessary M.S. screws etc complete. 8.130.2 Double each 8.00 38.50 308 0 0 0

89 PWD Building 2015 12.76 Providing and laying vitrified floor tiles with soluble salt printing, of size 600x600mm with water absorption less than 0.5% and conforming to IS : 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 12.76.1 size 600 x600 mm thickness 9 to 10 mm sqm 930.76 964.00 897252 0 0 0

90 PWD Building 2015 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 5.25 3330.00 17483 0 0 0

91 PWD Building 2015 12.9 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. 12.9.2 Size Above 300x300mm sqm 51.66 728.00 37608 0 0 0

92 PWD Building 2015 12.9.1 Size 300x300mm s sqm 12.31 692.00 8519 0 0 0

93 PWD Building 2015 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.Size above 200x300mm sqm 250.71 646.00 161959 0 0 0

94 PWD Building 2015 12.7.1 Size upto 200x300mm sqm 58.05 587.00 34075 0 0 0

95 PWD Building 2015 12.36 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. 12.36.1 Light shade using white cement sqm 46.80 799.00 37393 0 0 0

96 PWD Building 2015 12.37 Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Dark shade using ordinary cement sqm 6.06 518.00 3139 0 0 0

97 PWD Building 2015 14.57 Providing and applying 2mm thick white cement basedAcrylic grade putty with minimum 3 coats applied @ 4.0 kg/ 10sqm as per relevant IS code 17545:2021 (Product such as Asian trucare, Berger Happy walls Putty Birla Opus One pro smooth) to make the surface smooth and even with all tools tackles and labour etc. complete for the work . (This Item to be use in heigher grade painting works Item No. 14.65 sqm 8223.98 95.00 781278 0 0 0

98 PWD Building 2015 14.60 Providing and applying of Acrylic primer on all surface applied @0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 ( Product such as Asian Spark/suprimo , J.K. Primer, Dulux Acrylic Primer) with all tools tackles and labour etc. complete for the work. sqm 8324.04 37.00 307990 0 0 0

99 PWD Building 2015 14.14 Providing and applying Acrylic washable Distemper or lite coconomy Plastic emulsion paint having VOC Content less than 50gms/lit Minimum tow coats up to final finish applicad @ 1.25 kg/10sqm as per relevant L.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark Dulux Pomise sheen, Neroloc Litil Master Berger Bison Lite, Nippon Superio,) sqm 663.58 64.00 42469 0 0 0

100 PWD Building 2015 9.40 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in- charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) metre 160.00 164.00 26240 0 0 0

101 PWD Building 2015 9.41 Providing and fixing concertina fencing with reinforced barbed tape (R.B.T.) up to 3m height of wall with existing angle iron in any shape in one or more rows in horizontal/ vertical/inclined alignment tied with G.I. staples and G.I. clips including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)(RBT tape to be measured for each row) metre 960.00 14.00 13440 0 0 0

102 PWD Building 2015 9.3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 9.3.1 Electric resistance or induction butt welded tubes Grade-250 kg 387.94 88.50 34333 0 0 0

103 PWD Building 2015 14.67 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10sqm up to final finish as per relevant I.S, Code 15489:2013 Type -2 Class D,C (Glossy /Semi Glossy finish ) (Product such as Asian Ace,Dulux Promise Exterior Berger Wall Masta ,Nerolac Suraksha Plus ,Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty) sqm 3437.49 70.00 240624 0 0 0

104 PWD Building 2015 14.63 Providing and applying Economy Plastic emulsion paint with roller application minimum three coats appied @ 1.25 lit / 10 sqm up to final finish as per relevant I.S. Code 15489:2013_Type -1 Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor emulsion, Dulux Promise, Nerolac Bueaty Silver, Berger bison/breeze , Opus I30/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work . (With 2 Year warranty). 14.49.1 On new work (two or more coats) sqm 6877.55 74.00 508939 0 0 0

105 PWD Building 2015 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 Coats in all surface applying @ 0.75 lit/ 10 sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. sqm 570.45 133.00 75870 0 0 0

106 PWD Building 2015 23.36 Supplying and installing Air Vessel of 300 mm dia, 1.5m in height made of 5mm thick MS sheet including painting with one primer and two finish coats complete as per specification each 3.00 13136.00 39408 0 0 0

107 PWD Building 2015 23.1 Supply, erection, jointing, testing & commissioning of "C" Class MS pipes (as per IS: 1239) including necessary specials such as tees, bends, flanges reducers etc., complete on wall/ ceiling. The pipes to be erected on wall or suspended from beams, RCC roof slabs with suitable size MS bars/ angle irons including painting of metal part except pipe line. 23.1.1 50mm dia metre 45.00 322.00 14490 0 0 0

108 PWD Building 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. cum 702.51 65.00 45663 0 0 0

109 PWD Building 2015 9.37 Providing and fixing M.S. fan clamp/hook for ceiling fan made out of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop. each 8.00 97.00 776 0 0 0

110 PWD Building 2015 8.1 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. 8.1.2 Sal, bijasal, benteak, khair, haldu cum cum 0.05 61051.00 3297 0 0 0

111 PWD Building 2015 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 9.51.2 With float glass panes of 5 mm thickness sqm 14.88 708.00 10535 0 0 0

112 PWD Building 2015 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.1.3 White Orissa pattern W.C. pan of size 580x440 mm each 7.00 2899.00 20293 0 0 0

113 PWD Building 2015 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.4.1 White pedestal type each 6.00 2882.00 17292 0 0 0

114 PWD Building 2015 18.4.3 White wall hung type each 0.00 0 0 0 0

115 PWD Building 2015 18.22 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainlesssteel plug 40 mm including painting of fittings and brackets, cutting andmaking good the walls wherever required : 18.22.1 345x445 mm bowl depth 200 mm. each 3.00 6298.00 18894 0 0 0

116 PWD Building 2015 18.30 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror sqm 3.24 2016.00 6532 0 0 0

117 PWD Building 2015 18.17 Providing and fixing white vitreous china wash basin including making all connections C.I brackets,32 mm cp brass waste of standard 18.17.2 White Size 550x400 mm each 10.00 1408.00 14080 0 0 0

118 PWD Building 2015 18.19 Providing and fixing vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 18.19.1 White each 10.00 1130.00 11300 0 0 0

119 PWD Building 2015 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 5.00 599.00 2995 0 0 0

120 PWD Building 2015 18.76 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 18.76.1 75 mm dia pipe. metre 201.00 182.00 36582 0 0 0

121 PWD Building 2015 18.76.2 110 mm dia pipe. metre 430.00 267.00 114810 0 0 0

122 PWD Building 2015 18.77.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 18.77.1.1 75 mm each each 35.00 113.00 3955 0 0 0

124 PWD Building 2015 18.77.3 Vent covel 18.77.3.2 110 mm each each 9.00 44.00 396 0 0 0

126 PWD Building 2015 18.77.5 "P" trap 110mmx110mm long each 40.00 227.00 9080 0 0 0

127 PWD Building 2015 18.77.6 Nahani trap 110x75mm each 60.00 90.50 5430 0 0 0

128 PWD Building 2015 18.78 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 18.78.1 75 mm each 50.00 57.00 2850 0 0 0

130 PWD Building 2015 19.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.INTERNAL WORK - EXPOSED ON WALL 19.4.3 25 mm nominal outer dia .Pipes. meter 50.00 199.00 9950 0 0 0

131 PWD Building 2015 19.4.4 32 mm nominal outer dia .Pipes. meter 80.00 271.00 21680 0 0 0

132 PWD Building 2015 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 19.5.1 15 mm nominal outer dia .Pipes. meter 108.00 133.00 14364 0 0 0

133 PWD Building 2015 19.5.3 25 mm nominal outer dia .Pipes. meter 90.00 213.00 19170 0 0 0

134 PWD Building 2015 19.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete 19.6.4 32 mm nominal outer dia pipes meter 50.00 228.00 11400 0 0 0

135 PWD Building 2015 19.11 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 19.11.1 15 mm nominal bore each 25.00 85.00 2125 0 0 0

136 PWD Building 2015 19.11.3 25 mm nominal bore each 20.00 117.00 2340 0 0 0

137 PWD Building 2015 19.11.4 32 mm nominal bore each 18.00 148.00 2664 0 0 0

138 PWD Building 2015 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: 19.14.1 Bib cock (400gms) each 36.00 382.00 13752 0 0 0

139 PWD Building 2015 19.14.6 Stop cock (concealed) (600 grams) each 36.00 494.00 17784 0 0 0

140 PWD Building 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) each 18.00 382.00 6876 0 0 0

141 PWD Building 2015 19.14.10 Wall mixer with elegant knob (1400 grams) each 4.00 1787.00 7148 0 0 0

142 PWD Building 2015 19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) each 2.00 1248.00 2496 0 0 0

143 PWD Building 2015 19.14.8 Basin mixer pillar tap with spout (1000 grams) each 6.00 1248.00 7488 0 0 0

144 PWD Building 2015 19.14.12 Bottle trap set with extension pipes each 15.00 473.00 7095 0 0 0

145 PWD Building 2015 19.14.14 Soap dish plate each 9.00 163.00 1467 0 0 0

146 PWD Building 2015 19.14.15 Shower rose (revolving type) (150mm) each 15.00 269.00 4035 0 0 0

147 PWD Building 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) set 7.00 774.00 5418 0 0 0

148 PWD Building 2015 19.14.16 Towel rail (600mm long x 20mm dia) each 9.00 338.00 3042 0 0 0

149 PWD Building 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 47.00 51.00 2397 0 0 0

150 PWD Building 2015 19.43 Cutting holes more than 20x20 cm and upto 30x30 cm in walls including making good the same each 8.00 125.00 1000 0 0 0

151 PWD Building 2015 19.16 Providing and fixing gun metal gate valve of approved quality (screwed end): 19.16.1 25 mm nominal bore each 4.00 436.00 1744 0 0 0

152 PWD Building 2015 19.16.2 32 mm nominal bore each 3.00 510.00 1530 0 0 0

153 PWD Building 2015 19.16.3 40 mm nominal bore each 3.00 596.00 1788 0 0 0

154 PWD Building 2015 19.17 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 19.17.3 25 mm nominal bore each 2.00 432.00 864 0 0 0

155 PWD Building 2015 19.42 Providing and placing on terrace (at all levels) polyethylene water storage tank ISI marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. litre 9000.00 7.30 65700 0 0 0

156 PWD Building 2015 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate each 2.00 4644.00 9288 0 0 0

157 PWD Building 2015 19.13 19.13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: 19.13.2 Bib cock (350 grams) each 6.00 237.00 1422 0 0 0

158 PWD Building 2015 19.13.3 Stop cock (350 grams each 8.00 237.00 1896 0 0 0

159 PWD Building 2015 19.52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 3.00 4133.00 12399 0 0 0

160 PWD Building 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 6.00 1709.00 10254 0 0 0

161 PWD Building 2015 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approvedmake and conforming to IS:8931 including C.P. brass extension if required: 19.14.15 hower rose (revolving type) (150mm each 2.00 269.00 538 0 0 0

162 PWD Building 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 12.00 754.00 9048 0 0 0

163 PWD Building 2015 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) point 1.00 1502.00 1502 0 0 0

164 PWD Building 2015 21.2 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. 21.2.1 All types of soil 21.2.1.3 150 mm dia. meter 80.00 371.00 29680 0 0 0

165 PWD Building 2015 21.2.2 Rocky strata including Boulders. meter 50.00 396.00 19800 0 0 0

166 PWD Building 2015 21.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge. 21.3.3 150 mm nominal size dia. meter 81.00 540.00 43740 0 0 0

167 PWD Building 2015 21.11 Providing and fixing of M.S. well cap on top to the tube well casing pipe for protection: 21.11.3 150 mm dia each 1.00 217.00 217 0 0 0

168 PWD Building 2015 21.10 Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. hour 12.00 654.00 7848 0 0 0

169 PWD Building 2015 21.16 Providing ISI Mark 32 mm dia G.I. ( B class) riser pipe and M.S. plunger rod in 3 meter length socketed on one end as per IS: 1239 ( Part I) 1990 with up to date amendments and socket as per IS: 2062/1990 up to date amendments. metre 90.00 275.00 24750 0 0 0

170 PWD Building 2015 21.16 Providing ISI Mark 32 mm dia G.I. ( B class) riser pipe and M.S. plunger rod in 3 meter length socketed on one end as per IS: 1239 ( Part I) 1990 with up to date amendments and socket as per IS: 2062/1990 up to date amendments. metre 517.93 65.00 33665 0 0 0

171 PWD Road 2025 9.4 Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe on first class bedding Laying Reinforced cement concrete pipe NP3/prestressed concrete pipe complying to IS:458, with ends casted as per the requirements of flush jointing of pipes for culverts on first class bedding of granular material including joints duely filled and finished with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets.A 450 mm dia metre 7.5 1650 12375 0 0 0

172 PWD Road 2025 6.1 Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub-base as per IRC:SP-49 over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing as per clause 601. cum 59.25 2562 151799 0 0 0

173 PWD Road 2025 6.4 Providing and laying Un-reinforced Cement Concrete without Dowel bars including formwork and expansion, contraction & longitudinal joints as per design and as per IRC-62, over a prepared base a per approved mix design and finising to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads. With Cement concrete grade M-30 and minimum cement content @ 375 kg/cum cum 112.5 4748 534150 0 0 0

174 PWD Road 2025 3.12 Construction of embakment with Material Obtained from Borrow Pits/Borrow area Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits/borrow area with all lifts and leads, transporting to site spreading grading to required slope and compacting to meet requirement of table 300-2. cum 153.9 238 36628 0 0 0

175 PWD Road 2025 4.14 Providing & laying precast interlocking concrete blocks of required compressive strength with approved size, shape/ pattern over coarse sand bed of thickness 30 +/- 5 mm and joints filled with fine sand including leveling with surface vibrator, temping and sweeping etc. complete as per IRC-SP-63. (B) 80mm thick precast interlocking concrete block of C.C. M-40 grade on Area of Light Traffic/ residential streets (ii) 80mm thick Polymer coated coloured precast interlock concrete blocks sqm 510 871 444210 0 0 0

176 PWD E/M 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5 ) 1.7.1 Short point point 82.00 266.00 21812.00 0 0 N

177 PWD E/M 2020 1.7.2 Medium point point 108.00 424.00 45792.00 0 0 N

179 PWD E/M 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) point 6.00 420.00 2520.00 0 0 N

180 PWD E/M 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) point 75.00 216.00 16200.00 0 0 N

181 PWD E/M 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.10.3 Long point point 7.00 922.00 6454.00 0 0 N

182 PWD E/M 2020 1.10.4 Extra Long point I point 8.00 1302.00 10416.00 0 0 N

183 PWD E/M 2020 1.10.5 Extra Long point II point 10.00 1657.00 16570.00 0 0 N

184 PWD E/M 2020 1.10.6 Extra Long point III point 10.00 1995.00 19950.00 0 0 N

185 PWD E/M 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.11.3 Long point point 5.00 1350.00 6750.00 0 0 N

186 PWD E/M 2020 1.11.4 Extra Long point I point 4.00 1807.00 7228.00 0 0 N

187 PWD E/M 2020 1.11.5 Extra Long point II point 9.00 2315.00 20835.00 0 0 N

188 PWD E/M 2020 1.12 Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB "C" curve and 6 pin 20 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.12.3 Long point point 5.00 1705.00 8525.00 0 0 N

189 PWD E/M 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.13.2 3 X 2.5 sq. mm in 20mm conduit metre 450.00 111.00 49950.00 0 0 N

190 PWD E/M 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit metre 270.00 172.00 46440.00 0 0 N

191 PWD E/M 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit metre 185.00 238.00 44030.00 0 0 N

192 PWD E/M 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit metre 137.00 288.00 39456.00 0 0 N

193 PWD E/M 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification5.4.8.Fan regulator (one module size) electronic stepped type moving all rounds each 77.00 186.00 14322.00 0 0 N

194 PWD E/M 2020 5.4.22 Batten/ angle holder each 152.00 41.00 6232.00 0 0 N

195 PWD E/M 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. each 2.00 816.00 1632.00 0 0 N

196 PWD E/M 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification 5.7.2 .Deluxe each 5.00 107.00 535.00 0 0 N

197 PWD E/M 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 1200 mm sweep each 77.00 1697.00 130669.00 0 0 N

198 PWD E/M 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.6.1 300 mm sweep each 15.00 2446.00 36690.00 0 0 N

199 PWD E/M 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.6.17.4 9 watt each 24.00 143.00 3432.00 0 0 N

201 PWD E/M 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.6.19.3 18/20 watt {4feet} each 102.00 443.00 45186.00 0 0 N

202 PWD E/M 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.7 60 watt each 9.00 3622.00 32598.00 0 0 N

204 PWD E/M 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification.Above 7.19.2 300 mmand upto 450 deep sqm 3.00 7525.00 22575.00 0 0 N

205 PWD E/M 2020 7.20 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification.7.20.2 200amp (30x5mm) metre 2.00 907.00 1814.00 0 0 N

206 PWD E/M 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.9.1.24 4 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 35KA each 7.00 6378.00 44646.00 0 0 N

207 PWD E/M 2020 9.1.49 4 pole MCCB, 250A, Adjustable Microprocessor Release, 50KA each 1.00 22400.00 22400.00 0 0 N

208 2020 9.2 Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)9.2.68 way, Double door each 1.00 946.00 946.00 0 0 N

209 PWD E/M 2020 9.9 Supplying and fixing on surface/ recess prewired vertical type following way, 415 volts TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete with loose wire box, terminal blocks, 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland plate, loose wire box, superior make terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks including interconnections, earthing etc. as per specification. (But without MCB/ RCCB/ Isolator) (Note: Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.) 9.9.5 4 way (4 + 12), Double door each 5.00 6875.00 34375.00 0 0 N

211 PWD E/M 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.9.10.1 6 amps to 32 apms each 90.00 151.00 13590.00 0 0 N

212 PWD E/M 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification9.11.2 6 amps to 32 apms each 18.00 140.00 2520.00 0 0 N

213 PWD E/M 2020 9.19 Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.9.19.2 40 amps each 1.00 264.00 264.00 0 0 N

214 PWD E/M 2020 9.20 Supplying and fixing following rating, 415 volts, FOUR POLES, ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.9.20.2 63 amps each 6.00 621.00 3726.00 0 0 N

215 PWD E/M 2020 10.6 Providing and fixing metal clad, 4 pole, on load change over switch unit (without sheet steel enclosure), 415/500 volts, in cubicle panel including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. (Connecting lead if required shall be paid separately)10.6.3 200 amps each 1.00 9531.00 9531.00 0 0 N

216 PWD E/M 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. each 4.00 94.00 376.00 0 0 N

217 PWD E/M 2020 10.19 Providing and fixing penal mounting digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification each 1.00 975.00 975.00 0 0 N

218 PWD E/M 2020 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.20.2.Digital type each 1.00 835.00 835.00 0 0 N

219 PWD E/M 2020 10.22 Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification..10.22.1Digital type each 1.00 1901.00 1901.00 0 0 N

220 PWD E/M 2020 11.2 Supplying, installation, testing and commissioning following rating single phase in single phase out ON-LINE UPS including connection etc but without batteries as per specification.11.2.3.5 KVA with DC bus voltage 180 V each 1.00 46721.00 46721.00 0 0 N

221 PWD E/M 2020 11.4 Supplying, installation, testing and commissioning following rating (Sealed Maintenance Free) lead acid battery including connection as per specification.11.4.4 120 AH each 12.00 12124.00 145488.00 0 0 N

222 PWD E/M 2020 12.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 3.00 3243.00 9729.00 0 0 N

223 PWD E/M 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 7.00 6209.00 43463.00 0 0 N

224 PWD E/M 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. metre 166.00 77.00 12782.00 0 0 N

225 PWD E/M 2020 12.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification. metre 150.00 19.00 2850.00 0 0 N

226 PWD E/M 2020 13.1 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate having 4 nos holes for fixing etc. complete as per specification. each 6.00 767.00 4602.00 0 0 N

227 PWD E/M 2020 13.2 Making jointing of copper tape (with another copper tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as per specification. each 18.00 51.00 918.00 0 0 N

228 PWD E/M 2020 13.3 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For horizontal run) metre 30.00 217.00 6510.00 0 0 N

229 PWD E/M 2020 13.4 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For vertical run) metre 30.00 219.00 6570.00 0 0 N

230 PWD E/M 2020 13.5 Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as per specification. each 10.00 93.00 930.00 0 0 N

231 PWD E/M 2020 13.6 Providing and laying copper tape 32 mm X 6 mm from earth electrode directly in ground as per specification. metre 80.00 654.00 52320.00 0 0 N

232 PWD E/M 2020 14.5. Supplying and fixing G.I. pipe along with wall or pole/ support with 2 Nos MS clamps for protection of under ground cable in approved manner including bolts and nuts or metal dash fasteners complete as per specification.14.5.1 32 mm dia metre 178.00 295.00 52510.00 0 0 N

233 PWD E/M 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.14.2.1 63 mm outer dia metre 210.00 124.00 26040.00 0 0 N

235 PWD E/M 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).15.3.15 3.5 x 95 sq. mm. metre 70.00 295.00 20650.00 0 0 N

239 PWD E/M 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. 15.23.16 .3½ X 95 sq. mm (38 mm) each 8.00 256.00 2048.00 0 0 N

242 PWD E/M 2020 19.3 Supply of swaged steel tubular pole as per IS 2713 with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at specified height including painting with one coat of red oxide zinc chromate primer19.3.3.Designation 410 SP-8 height 7.50 metre each 6.00 7993.00 47958.00 0 0 N

243 PWD E/M 2020 19.9.1 Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification.19.9.5Double Over Hang 0.75 metre Long each 12.00 1355.00 16260.00 0 0 N

244 PWD E/M 2020 19.10 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length19.10.4 7 metre to 10 metre each 6.00 2610.00 15660.00 0 0 N

245 PWD E/M 2020 19.16 Supplying and fixing water tight terminal box made of 1.6mm thick M.S. sheet with detachable gland plate in bottom, hinged front open able cover, rubber gasket, having 1 Nos 4way connector and 1 No SPMCB inside the box for cable connection, fixed to pole with 2 Nos clamp made from 40x3mm M.S. flat with 2 No nut bolt dully painted with 2 coat of red oxide paint and 2 coat aluminium paint complete as per specification19.16.1 .20 x 15x15 cms. each 6.00 699.00 4194.00 0 0 N

246 PWD E/M 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.23.3.5 5.0 HP, three phase each 1.00 26072.00 26072.00 0 0 N

247 PWD E/M 2020 23.10 Supply, installation, testing and commissioning of 5-7.5 HP 3 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 5/7.5 HP 3 phase DOL starter with over load and no volt relay 1 No c) 32 A "C" curve TPMCB 1 No d) Voltmeter 0-500 V with selector switch 1 set e) Ammeter 0-10 A with CT's and selector switch 1 set. each 1.00 4152.00 4152.00 0 0 N

248 PWD E/M 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.23.14.4 3x6.0 sqmm metre 74.00 135.00 9990.00 0 0 N

249 PWD E/M 2020 24.23 Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. 24.23.2 60/120 Ltrs/hr each 1.00 34581.00 34581.00

250 PWD E/M 2020 24.24 Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. 25.24.1 25 Ltrs/hr output capacity each 1.00 23508.00 23508.00 0 0 N

251 PWD E/M 2020 30.2 Earth work in soft rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling with excavated soil in trench / pit to ground level complete as per specification cum 34.50 210.00 7245.00 0 0 N

GRAND TOTAL (CIVIL + ELETRIFICATION WORK) ------ ------ ------ 20871387 ------ ------ ------