Maintenance/repair/replacement of internal electrification,wiring DBs ,sub main wiring ,bldg earthing .E/M fitting and fixtures and repair/servicing of Ceiling fans, Pedestal fans ,Exhaust fans,Geysers ,battery charege at AGE(B/R) Mandapam under

Amount

M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded1100V grade copper FRLS cable with one run of 1.5sqmm PVC insulated copper cable as earth continuity drawn in existing Concealed/ surface PVC conduit for one light point/ fan point/bell point controlled by one switch including 1.0mm thick prefabricated concealed galvanised boxes with hylem cover plate of suitable size for fixing switches, sockets regulator and connected the earth wire to common earth dolly , including Taking down carefully copper / aluminium point wiring complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder etc. Note:- Rate includes all cutting & chasing on existing wall/ceiling and also includes making good to match the existing wall / ceiling finishes the disturbed surfaces of wall / ceiling complete all as specified and directed by the Engineer-in-Charge.

All as per item No 1 here-in-before but for 5A socket point on same board complete all as specified

All as per item No 1 here-in-before but for 5A independent socket point complete all as specified

All as per item No 1 here in before but one light point controlled two switches.complete all as specified

All same as per item No.1 above but with 4 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4 sqmm PVC insulated copper cable as earth continuity for power socket on independent board.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC conduit totally concealed/surface conduit in walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including 1.0mm thick prefabricated concealed galvanised boxes with white modular cover plate & frame of suitable size for fixing modular switches, sockets regulator and connected the earth wire to common earth dolly for One light/fan point/bell point/5 Amp independent Socket point controlled by one switch including taking down the existing old wiring of any description and type complete all as specified and as directed. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and the rate also include all the cutting, chasing and cementing work and as directed by the Engineer-in-Charge.

All as per item No 1 here-in-before but for 5A socket point on same board complete all as specified

All as per item No 1 here-in-before but for 5A socket point on independent board complete all as specified

All same as per item No.2 above but with 4 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4 sqmm PVC insulated copper cable as earth continuity for power socket on independent board.

Supply and fixing Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge.

Supply and fixing Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair modular Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified.

Supply and fixing in repair modularSocket 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified.

Supply and fixing of modular Fan step regulator, 120W - 2 module complete all as specified.

S & F in repair switch piano flush button, single pole one way 5 Amps, 230V AC supply complete all as specified and directed.

S & F Two way switch piano flush button 6 A complete all as specified and directed by the Engineer-in-Charge.

S & F in repair switch socket combination 3 pin 5 Amps flush type with out gang box, 230V AC supply, complete all as specified and directed by the Engineer-in-Charge.

S & F in repair switch socket combination 2 in 1 5 pin, 5/15 Amps flush with out gang box, 230V AC supply , complete all as specified and directed by the Engineer-in-Charge.

S & F in repair switch socket combination 3 pin 5 Amps flush type with gang box, 230V AC supply, complete all as specified and directed by the Engineer-in-Charge.

S & F in repair switch socket combination 2 in 1 5 pin, 5/15 Amps flush with gang box, 230V AC supply , complete all as specified and directed by the Engineer-in-Charge.

S & F in repair bell push piano flush button 6A 230V complete all as specified and directed by the Engineer-in-Charge.

S&F in repair electronic fan regulator, upto 300 Watt, 230V AC supply complete all as specified and directed by the Engineer-in-Charge.

S & F in repair Calling bell ding dong 230 v AC supply complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repair ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and directed by Engr-in-charge.

Removing of light fitting of any type during the wiring work and refixing the same including replacement of 2 core connecting wire complete all as specified and as directedc by Engg in Charge

Supply and fix Hylam sheet required as per existing size in site with screws suitably cutted fr existing switch fixtures including removing old one all as directed

S & F LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 1800/2000 lumens of warm/cool white comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge (Quoted rate includes warranty as per particular specification).

S & F LED light fittings, 2 feet long of minimum 900 lumens of warm/ cool white wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge (Quoted rate includes warranty as per particular specification)..

S & F wall mounted bulk head LED light of minimum 700 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge (Quoted rate includes warranty as per particular specification).

S & F Square recessed mounted LED light (2'x2') of minimum 3200 to 3600 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge (Quoted rate includes warranty as per particular specification).

S & F in repair decorative wall mounted LED mirror light of minimum 900 to 1000 Lumens with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge (Quoted rate includes warranty as per particular specification).

S & F Building Security light LED type of minimum 2500 to 3000 Lumens Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge (Quoted rate includes warranty as per particular specification).

S & F in replacement bulb holder (pin pype/threasd type) complete all as specified and as directed by the Engineer-in-Charge

S & F in replacement bulb of 9W (pin pype/threasd type) complete all as specified and as directed by the Engineer-in-Charge

S & F flood light 9000 to10000 Lumens (min) new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

S & F flood light 18000 to 20000 Lumens (min) new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

S&F Cable Junction of size 93 x 93 x 62 Boxes IP 66/69 “halogen free and weather proof” for 2.5 sq.mm cable for outdoor installation ( with same company metric knockouts for cable entry and terminal) Make : Hensel Model : KF 0202 G or its equivalent

Supply and fixing Post top lantern for 360 degree indirectlight with IP- 65 protection 40W AC Supply single phase energy saving, environmental friendly, long life aesthetically designed with resistant to impact and corrosion, Glare free and better uniformity and symetrical light distruction spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed.

Taking down ceiling fan from its position and doing complete overhauling of fan including dismantling, replacement of fan clamp and split pin, rubber bush refixing the same after repairs complete all as directed by Engr-in-Charge.

M & L for painting of ceiling fan of any sweep with synthetic enamel paint over a paint of primer including filling of cavities complete all as specified and as directed by Engg in charge

S & F in repairs oil capacitor of 2.5 mfd for ceiling fan of any sweep complete all as specified and directed by Engineer- in -Charge.

S & F in repairs bearing of suitable size for ceiling fan of any sweep complete all as specified and directed by Engineer- in -Charge.

M & L for rewinding of ceiling fan motor of type 1200 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish etc. complete all as specified and directed by Engineer- in -Charge.

Taking down Exhaust fan of any size from its position and doing complete overhauling of fan including fan capacitor of 4.0mfd and other spare parts painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as directed by Engr-in-Charge. .

M & L for painting of exhaust fan of any sweep upto 300mm with synthetic enamel paint over a paint of primer including filling of cavities complete all as specified and as directed by Engg in charge

M & L Rewinding of Exhaust fan motor of sweep upto 300mm & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size,painting etc. complete all as specified and directed by Engineer- in -Charge.

Taking down Air circulator fan of any size above 450mm sweep from its position and doing complete overhauling of fan including replacement of fan capacitor of upto 6.0mfd and other spare parts, painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as directed by Engr-in-Charge. .

S & F in repairs MCCB 3 Pole, 32/40/63 Amps, 50 Hz, 16KA, 415 Volts with all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 4 Pole, 100 Amps, 50 Hz, 25KA, 415 Volts, with all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 4 Pole, 125 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 4 Pole, 160 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as directed

Supply and fixing in replacement of Factory made sheet metal enclosure for TPN MCCB DBs double door (Fixed flush to the wall), MCCB as incommer & outgoing as TPN 415 volt, 6 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s,including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed by Engr-in charge.

Supply and fixing in replacement of Factory made sheet metal enclosure for TPN MCB DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed by Engr-in charge.

Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed by Engr-in charge.

Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed by Engr-in charge.

Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed by Engr-in charge.

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified

Supply and fixing of MCB 40-63 Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series, , complete all as specified

Supply and fixing of MCB 25 to 63 Amp, 415 Volt, TP, breaking capacity 10 KA 'C' series, , complete all as specified

Supply and fixing of MCB, TPN 40-63 A, 'B' Curve, breaking capacity 10KA complete all as specified

M&L for sub main wiring with four run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 6.0Sq mm drawn through PVC concealed/surface conduict of 40 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 4 run and two run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

M&L for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

M&L for sub main wiring with two run of 2.5 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 2.5 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.

Supply & fix in repair single pointed air termination Aluminium rod, 12 mm dia, 300 mm long. Complete all as specified and as directed.

Supply & fix in repair aluminium strip 25 mm x 3 mm Complete with saddles and fixing screws for Fitting the strip.

supply and fix in repair test point terminal box of size 200 x 100 x 100 mm made out of 2 mm thick hot dip galvanised sheet drilled and screwed including 6 Nos 15 mm long hexagonal head screws complete with test point terminal block made out of Gun metal or Phosphorus Bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, etc complete all as specified and directed.

M&L for Rewinding of rolling shutter/hanger door motor of capacity up to 7.5HP, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc.including repairing andoverhauling the gear box assembly by metal filling, cutting and other maching process in lathe complete including replacement of bearing of suaitable size and chain link and spocket with mounting shaft all as specified and directed by Engineer- in -Charge.

M&L for replacement of startor single phase/3Phase DOL type suiatable for hanger/rolling shutter two way revolving type (clockwise and anticlockwise both type) complete all as specified and directed

M&L for limit switch LSRS 10A-125,250 or 480 V ACsuitable for shutter/hanger door complete all as directed

S & F in repairs sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB, SP, 20 Amps, 240 volts, 10 KA complete suitable for AC/watercooler all as specified and directed.

S & F in repairs Wall mounted Alternating current socket distribution box (Industrial socket) 3 pole, neutral and earth, IP 44 protection of metal body three phase 415 Volts, 50 Hz with provision for one 32 Amps MCB TPN including necessary fixing arrangements complete all as directed by the Engineer-in-Charge.

S & F in repairs Wall mounted Alternating current plug (Industrial plug) of 32 Amps, 3 pole, neutral and earth (3P+N+E) , IP 44 protection of metal body three phase 415 Volts, 50 Hz including necessary fixing arrangements complete all as directed by the Engineer-in-Charge.

S & F in repair Aviation obstruction light LED type filament-less bulb complete including standard fixing arrangements including timer switch complete all as specified and as directed Make : Bajaj cat part No BGAV 302 LED or equivalent in /Havells/Philips/Wipro

M&L for removing the old rusted DB/steel DB covers of any specification and any type complete after dressing the cable of any size and securing it properly and filling the cavity/blank space with cement mortar of 1:3/brick masonary work and applying birla putty on wall surace to achive even and smooth surface and applying two coat of distemper on wall including primer complete and fixing the new/old existing DB of any specification all as directed and specified by Engr-in-charge. Note : New DBs will be measured separately if required as independent item under this schedule.

S & F 2mm thick GI hot dip galvanised / powder coated perforated type cable trays of size 100mm width, 50mm depth fixed with and including necessary MS clamps, nuts, bolts fixed to walls / ceiling including taking down old cable tray complete all as directed by the Engineer-in-Charge.

M & L for 2mm thick MS sheet bent to shape to cover the MS box enclosure for SPN DB and meter including necessary anti rust painting and 2 coats of paint, making of proper hinges for fixing to the existing MS box complete all as specified and as directed.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI strip of 32x6 mm size by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber, cover slab with angular iron for holding, 20mm dia GI medium grade pipe for watering , and water funnel with wire mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber, cover slab with angular iron for holding, 20mm dia GI medium grade pipe for watering , and water funnel with wire mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M & L for cleaning around earth pit and pouring of salt water including testing of earth complete including making of proper fininshing and painting complete all as specified and as directed.

M & L for cover slab of earth pit of building complete including placing of iron angular for opening & closing of cover slab and painting complete all as specified and as directed.

M & L for taking down existing electric geysers of any type and capacity including dismantling the spares and cleaning, servicing the geyser by descaling inner body of water tank and cleaning it with soap and acid mixed water, brazing or welding of tank as required and reassembling the geyser set and refixing the same in original position including checking for proper function complete all as directed by Engr-in-Charge. [Note: Quoted rate is deemed to be inclusive for any minor spares such as nut & bolt auto cut, washers, indicating lamp etc as required. However geyser element & thermostat shall be measured and paid seperately]

S & F in repairs geyser element 1.5 KW capacity complete all as specified and directed by Engr-in-Charge.

S & F in repairs Thermostat of necessary capacity complete all as specified and directed by Engr-in-Charge.

Supply & Fix in repairs Hot and cold pipes complete along with ncessary nuts and bolts as required and as specified and directed.

M&L for 4mm dia GI earth wire for earthing connection to building, complete all as specified.

M&L for 32 x 6mm galvanised iron strip for earthing connection to building, complete all as specified.

Note: Orginial GST paid PV's/TC for the materials procured for the above BOQ items shall be produced alongwith the payment claimed by the contractor.

Global Safety Engineering and Management Solutions

rc enterprises

lakshmibuilders

Sri Sankar Enterprises

KRISHNA ENTERPRISES

VVM CONSTRUCTIONS

EASHWAR ELECTRICALS