REPAIRS TO JOINERY, ROOFING, CEILING, FLOORING, PLUMBING WORKS AND PERIODICAL SERVICES TO CERTAIN BLDGS AND REPAIRS TO DRAINS, COMPOUND WALLS, FENCING AND CLEANING/REPAIRS TO SEWAGE LINES, MANHOLES, SOAKAGE WELLS AND SEPTIC TANKS AT NLP MIL STN UNDER

Amount

DEMOLITION & DISMANTLING

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (un-reinforced) in any Position not otherwise specifically provided for and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) in any Position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Dismantling Posts or Struts (Steel or RCC) any Section, embedded in Natural Ground including Taking out embedded Portion of Posts or Struts and Making Good Disturbed Ground, complete all as specified and as directed. NOTE : Excavating in Post Holes will be Measured and Paid for separately under appropriate Items.

Dismantling Posts or Struts (Steel or RCC) any Section, embedded in Cement Concrete including Taking out embedded Portion of Posts or Struts and Making Good Disturbed Ground, complete all as specified and as directed. NOTE : Excavating in Post Holes will be Measured and Paid for separately under appropriate Items.

Dismantling Timber Scantling 40 Sq Cm and Over in Section in Unframed Work, complete all as specified and as directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlins, etc. Under 40 Sq Cm in Section in Unframed Work, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Demolition Brick Work, Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. including Serviceable Bricks or Pre-cast Concrete Blocks keep in Safe custody for reuse at Site, complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work of any description including Serviceable Wrought Iron or Mild Steel keep in Safe custody for reuse at Site, complete all as specified and as directed.

Dismantling Fencing Wire Mesh of any description including Serviceable Chain Link Fencing keep in Safe custody for reuse at Site, complete all as specified and as directed.

Dismantling Barbed Wire of any description including Serviceable Barbed Wire keep in Safe custody for reuse at Site, complete all as specified and as directed. NOTE : Each Line of Barbed Wire will be Measured for Payment.

Dismantling Plain or Corrugated Steel Sheet or Galvalume Steel Sheet of any gauge and thickness, Serviceable Sheets keep in Safe Custody for Refixing, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Hacking out Old Broken Glass (any thickness, size, quality or description) from Wooden or Metal Frame or Stone, Concrete or Brick surrounds including hacking out old Putty or removing Beads, etc., punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections (if any), stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections (if any), stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Demolition & breaking up Drain/ Seware Pipe 100mm/110mm dia (Salt Glazed Ware, AC or Reinforced Concrete) including PCC Haunching (except Bed), set in Cement Mortar, complete all as specified and as directed.

Demolition & breaking up Drain/ Seware Pipe 150mm/160mm dia (Salt Glazed Ware, AC or Reinforced Concrete) including PCC Haunching (except Bed), set in Cement Mortar, complete all as specified and as directed.

EARTH WORKS

Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, filling in approved Soft/Loose Soil including spreading leveling, watering and well ramming in layers not exc. 25 Cm thick, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed.

Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out and removing surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed.

Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out, Returning, Filling in and Ramming Earth or Broken Rubble mixed with Earth around in layers not exc. 25 Cm, Watering and Removing Surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed.

REPAIRS TO JOINERY, ROOFING, CEILING, FLOORING, PLUMB-ING WORKS, COMPOUND WALLS, FENCING, DRAINS & SEWAGE SYSTEMS

M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Surface Channels and Drains, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.

M&L Extra for Forming Fair finished Drain or Channel not exc. 30 Cm Inner Girth in Cement Concrete, using Extra Cement including Forms, Moulds, Stopped Ends, etc., complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. for embedding /fixing RCC Fencing Posts or Struts including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) in Roof Kerbs or Mud Stops, etc., weathering slightly rounded or chamfered angle and throating, finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork is deem to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Bed Blocks, Benching, Copings, etc., weathering slightly rounded or chamfered angle and throating, finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork is deem to be included in the Quoted Unit Rate.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:4, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Fencing Posts, Struts, etc., average Sectional Area exc. 100 Sq Cm but not exc. 250 Sq Cm, with or without Chamfered Angles and flat, splayed, rounded or mitred Tops and fixed, etc., complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items.

M&L Pre-cast Cement Concrete 1:3:6 (20mm graded stone aggregate) Block Masonry with Solid Blocks, exc. 10 Cm in width, Set in Cement Mortar 1:6, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Timber Scantlings, Clean Swan, Over 40 Sq mm in Section as Unframed Work and fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain Fillets, Cleansawn, Square, Rectangular or Triangular in Section, exc. 13.00 Sq Cm but not exc. 25.00 Sq Cm, fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain Fillets, Cleansawn, Square, Rectangular or Triangular in Section, exc. 6.00 Sq Cm but not exc. 13.00 Sq Cm, fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain Fillets, Wrought, Square, Rectangular or Triangular in Section, exc. 3.00 Sq Cm but not exc. 6.00 Sq Cm, fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Panelled Shutter 35mm thick (any number Panels) Plain, Framed with Lock Rails, having Panels of 12mm thick Veneered Particle Board medium density, Wood Particle Board with Commercial Face Veneers and fitted to Chowkat, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/ sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Butt Hinges will be Measured and Paid under appropriate Item.

S&F Aluminium anodised Barrel Tower Bolt, 125mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt, 150mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge (as approved) 75mm in size, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge (as approved) 100mm in size, complete all as specified and as directed.

S&F Aluminium Handle 125mm, Cast type, anodised, complete all as specified and as directed.

S&F Aluminium Handle 150mm, Cast type, anodised, complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Mild Steel Round Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Mild Steel Flat Iron 40x6.0mm (Fillet for securing Wire Mesh, etc.) cut to length including all necessary drilling, bolting or riveting, etc. and Similar Work, conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) 5.0mm to 10mm diameter of Neck and length of Bolt exc. 5.0 Cm and not exc. 10 Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed.

Supply only Chain Link Fencing 100x100mm mesh with 4.0mm dia Mild Steel Galvanised Wire, complete all as specified and as directed.

Fixing only Chain Link Fencing including Line Wires, any mesh, size and type to any type of Standards, Rails, Straining Bolts, etc. including Provission of Mild Steel Binding Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

S&F Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia barbed with 2mm dia Barbs at 75mm spacings and straining and fixing to any type of Standard Rails straining Bolts, including securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc., complete all as specified and as directed. NOTE : Each Line of Barbed Wire will be Measured for Payment.

S&F Corrugated Mild Steel Sheeting 0.63mm thick, Galvanised @ 275 Gram Per Sqm, with Two Corrugation Side Lap, fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards 4.0mm thick in Ceiling, fixed to Timber Frame Work with Screws, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick in Flooring, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth with Using Extra Cement, complete all as specified and as directed.

M&L Glass Dividing Strips 38x3.0mm thick, inserted in Position, conform to Design, complete all as specified and as directed.

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular/ Square), Area of Each Tile exc. 0.06 Sqm but not exc. 0.11 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Paths, Hardstanding, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.

M&L Rendering 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.

M&L Preparing Newly Plastered or Concrete Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing New Non-Asbestos Fibre Cement Building Boards Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality Paint of approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, not exc. 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing New Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and as directed.

M&L Preparing New Steel and Iron Surfaces of any description, not exc. 10 Cm in Width or Girth, not otherwise described and applying Two Coats of Synthetic Enamel Paint (1st Grade/ Quality) over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and as directed.

M&L preparing New or Previously Treated Surface of Wood and Wood based Materials of any description and girth and treated with Two Coats of Creosote Oil, complete all as specified and as directed.

M&L Preparing previously Untreated Surfaces of Wood and Wood Based Materials, of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixing-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule including Taking/ Lowering down unserviceable Water Storage Tank of any description, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule including Taking/ Lowering down unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixing-in-repairs, complete all as specified and as directed.

S&F Plastic Top Cover Assembly suitable for Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top and Fixed-in-repairs, complete all as specified and as directed.

S&F Plastic Top Cover Assembly suitable for Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top and Fixed-in-repairs, complete all as specified and as directed.

M&L Cleaning Service Water Tank RCC/PVC of capacity exc. 250 Litre and not exc. 500 Litre and the connected Circulating Pipes at any Position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots, etc. or any other foreign materials from the bottom, cover and internal surfaces by scraping using wire brush, Draining out the water in the Tank and Washing internally by using Bleaching Powder and again Draining out the water in the Tank, Writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height with White Paint on Black back ground, complete all as specified and as directed.

M&L Cleaning Service Water Tank RCC/PVC of capacity exc. 500 Litre and not exc. 1000 Litre and the connected Circulating Pipes at any Position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots, etc. or any other foreign materials from the bottom, cover and internal surfaces by scraping using wire brush, Draining out the water in the Tank and Washing internally by using Bleaching Powder and again Draining out the water in the Tank, Writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height with White Paint on Black back ground, complete all as specified and as directed.

S&F Squatting Pan of size 580x440mm, White, Vitreous China, Orissa Pattern with Integral Foot Rests, PVC (SWR) ‘P’ or ‘S’ Trap, Front or Back Inlet, Set in and including Lime Concrete Bedding, jointing to Trap and Flushing Pipe, Anti-syphonage Pipe etc. and including providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including Making Good to Floor/ Distrubed Surfaces and Fixing-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with PVC (SWR) ‘P’ or ‘S’ Trap and Fixing Bolts and including Making Good to Floor/ Distrubed Surfaces and Fixing-in-repairs, complete all as specified and as directed.

S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and Fixing-in-repairs, complete all as specified and as directed.

M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixing-in-repairs, complete all as specified and as directed.

S&F Toitet Paper Holder of size 150mm (as approved), Brass Chromoum Plated with Rod to hold Paper Roll and Fixing-in-repairs, complete all as specified and as directed.

M&L Vitreous China Wash Hand Basin of size 550x400mm, White (Flat Back) including PTMT Waste Fitting 32mm bore (dia), a Pair of Cast Iron Brackets or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps and Fixing-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Urinal of size 465x355x265mm, Flat Back, (exclud -ing Flushing Cistern, Flush Pipe and Waste Pipe) including providing and fixing Plugs, Bedding Urinals against Wall in Cement Mortar 1:2, securing Urinal to Plug with and including 60mm long Brass Chromium plated Screws, Pointing around Urinal back in Cement Mortar 1:3, fixing Urinal Spreder of Brass Chromium plated, Flush Pipe, Grating and Union for Discharge Pipe (but Exclusive of fixing Supply Pipe to Flushing Cistern, Trap and Waste Pipe) and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC Waste Pipe 32mm bore (dia) of length not less than 750mm (as approved) with PVC Coupler 40mm bore (dia) suitable for Urinals, etc. and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 450mm in length with PTMT Nuts suitable for Flushing Cistern, WHB, etc. and Fixing-in-repairs, complete all as specified and as directed.

S&F Chromium Plated Shower Rose with Shower Arm 125mm, Swival Joint including fixing to Steel Pipe and Fixing-in-repairs, complete all as specified and as directed.

M&L PVC (SWR) Floor Trap having Diameter of Outlet in 75mm, Plain with Grating including Jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors, fixing to Walls, etc. including Taking down/ out Unserviceable Pipe of any description, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Branch Pieces, Single (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 75mm bore (dia), jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors, fixing to Walls, etc. including Taking down/ out Unserviceable Pipe of any description, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Branch Pieces, Single (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches Fittings, jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia), jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Gully Trap 125/110mm bore (dia), setting and jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil and Waste Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

S&F PVC (SWR) 110mm bore (dia) Soil and Waste Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

S&F PVC (SWR) 160mm bore (dia) Soil and Waste Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 110mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 160mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 110mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 160mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

PERIODICAL SERVICES TO CERTAIN BUILDINGS

M&L Preparing Old Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete all as specified and as directed.

M&L Preparing Old Treated Plastered Surfaces of Ceilings and applying One Coat of White Wash, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Colour Wash over a Coat of White Wash, complete all as specified and as directed.

M&L Preparing Old Distempered Surfaces of Walls by Washing, Rubbing down and Stopping of Surfaces and applying One Coat of Distemper Oil Emulsion (of approved Tint), complete all as specified and as directed.

M&L Preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Cement Base Paint (as approved Tint), complete all as specified and as directed.

M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Old Painted Asbestos Cement Building Boards Panel Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Old Painted Wooden Surfaces of any description, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when Painted in different Tint and applying One Coat of Synthetic Enamel Paint (1st quality Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any description (other than Roofing, Wall Cladding, etc.), over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any description, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when Painted in different Tint and applying One Coat of Synthetic Enamel Paint (1st quality Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Newly Painted/ Treated Brick, Stone, Concrete or Plaster Surfaces, Area not exc. 0.50 Sqm Each and applying One Coat of Synthetic Enamel Paint (Black/ Red or as approved Tint) as Base Surface Area for Writing Letters, etc., complete all as specified and as directed.

M&L Stencil Writing Letters or Figures (Block. Roman, Italic or Indian) of height exc. 100mm and not exc. 300mm with White Synthetic Enamel Paint over Black Base Surfaces, complete all as specified and as directed.

M&L Stencil Writing Stops, Commas, Short Lines, Dashes, Hyphens, Brackets, etc. with White Synthetic Enamel Paint over Black Base Surfaces, complete all as specified and as directed.

CLEANING TO SEWAGE SYSTEMS

M&L Removing/Cleaning Blockage of Sewer Line 100/110mm bore (dia), manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.

M&L Removing/Cleaning Blockage of Sewer Line 150/160mm bore (dia), manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.

M&L Removing and/or Cleaning Blockage of WC by any means of Flushing with Water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.

M&L Removing and/or Cleaning Blockage of Floor Trap, Nahani Trap, etc. by any means of Flushing with Water, complete all as specified and as directed. NOTE : The Item is Measurable/Operative upto TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.

M&L Cleaning GULLY TRAP, Depth not exc. 0.50 METRE by opening Cover and taking out accumulated Garbage, Brick Bats, Silts or any other Items, re-fixing the Cover after cleaning of Gully Trap, removing and carrying Brick Bats, Garbage, Silts, etc. to a distance exc 50 Metre but not exc 100 Metre and burried (minimum 300mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative upto TWICE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. (b) Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted UNIT RATE.

M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 1500 Litre capacity) from MANHOLES, SEPTIC TANKS, etc., (Depth not exc. 1.50 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 300mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative only ONCE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. (b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE in-Charge. (c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deem to be included in the Quoted UNIT RATE.

M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 1500 Litre capacity) from MANHOLES, SEPTIC TANKS, etc., (Depth exc. 1.50 METRE but not exc. 3.00 METRE) as required to keep Complete Sewage System Functional and To avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 300mm covered with Soils over Two layers of Bamboo Matting without maintaining gap), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative only ONCE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. (b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE in-Charge. (c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deem to be included in the Quoted UNIT RATE.

M/s GOURAB JYOTI GOGOI

D.D Construction

M/S D P BERLIA