Providing Interior Works for proposed office of TNUIFSL

Amount

DEMOLITION WORK & CIVIL & WET WORKS

Dismantling /removal of existing 230/200MM THK. brick masonary / block wall along with existing wall Tiles at locations as indicated on the drawings with out distrubing existing ducts, and other services lines. cost to includes carting away and disposing of all debris away from site to the Corporation dumping area including all lead and lift etc. all as required and as directed. Scaffolding included

Dismantling/removal of existing 115/100MM THK. brick masonary / block wall along with existing wall Tiles at locations as indicated on the drawings with out distrubing existing ducts, and other services lines. cost to includes carting away and disposing of all debris away from site to the Corporation dumping area including all lead and lift etc. all as required and as directed.Scaffolding included

Dismantling of existing Vitrified tile flooring including removing the under layer of sunken slab cement concrete or cement mortar till the RCC slab. cost to includes carting away and disposing of all debris away from site to the Corporation dumping area including all lead and lift etc. all as required and as directed.Scaffolding included

Dismantling of existing Wall tile including removing the under layer of cement mortar till the Wall Surface. cost to includes carting away and disposing of all debris away from site to the Corporation dumping area including all lead and lift etc. all as required and as directed.Scaffolding included

Removal & Refixing for Safety Reason of Existing AC Outdoor units for Dismantling work of 2nd Floor Conference Room Wall & 3rd Floor Cubile area Demolishing. Scaffolding included.

Core Cutting for Electrical Wiring & Cabling in R.C.C

R.C.C Concrete Dismantling

Removal of Existing Door in 2nd & 3rd Floor Main Door, Room Door, Toilet Door in rooms.

Green netting, Saftey Barrigating and Saftey Signs at the permises for Demolition.

200MM THK. Light Weight Blockwork: Providing and constructing 200mm thk aerocon block wall with 1:3 cement-sand mortar.( Make Coramendal / Ultratech or equivalent ) Rate to include 75mm x 200mm using 8mm rods stiffner beams using M25 concrete at required areas. Wherever wall is constructed on existing smooth finish screed, the surface of the screed shall be hacked rough and watered to ensure adherence of mortar. Rate to include loading, unloading, lead & lift, at all level, etc complete.

100MM THK. Light Weight Blockwork: Providing and constructing 200mm thk aerocon block wall with 1:3 cement-sand mortar.( Make Coramendal / Ultratech or equivalent ) Rate to include 75mm x 200mm using 8mm rods stiffner beams using M25 concrete at required areas. Wherever wall is constructed on existing smooth finish screed, the surface of the screed shall be hacked rough and watered to ensure adherence of mortar. Rate to include loading, unloading, lead & lift, at all level, etc complete.

Providing & laying in position machine mixed and machine vibrated cement concrete of controlled grades (M25) for reinforced cement concrete for Lintel beam. ( Make Coramendal / Ultratech or equivalent ) Lintel concrete element in any shape and as per structural design and as directed by structural consultant using 20 mm or as specified size of crushed stone aggregates including design of concrete mixes, Reinforcement, centring and shuttering if required, laying spreading, ramming, consolidating as per requirement and curing etc. complete as directed.(100 x 150mm) 5 nos of 10mm dia rod + 8mm ring at 150mm C/C

Anti termite treatment: Confirming to IS: 6313 (part-ii) 1981, providing pest control and anti-termite treatment by appointing a specialised agency as per the specifications mentioned by the bureau of Indian standards and agencies specifications (whichever is higher),for general, civil, plumbing, drainage, timber/carpentry works & gypsum related works, including a 10-years guarantee under suitable undertaking etc. Complete as directed.(mode of measurement to be on carpet -area of floor & not the area of surface treated).

Providing and laying 40 mm thick Grano flooring with under layer of 28 mm thick Cement concrete 1:2:4 (1 part cement, 2 part coarse sand and 4 part stone aggregate 12.5 mm and down graded) finished smooth with top layer of 12 mm thick mortar in CM 1:2 (1 part cement : 2 part coarse sand )and cement slurry @ 2.2 Kg / Sq.M including rubbing/ grinding the top surface to match, including rounding off the junction and corners with floors and walls, necessary construction joints, finishing the top surface smooth / chequered or broom, curing etc. complete as directed.

Providing and applying 12 mm thick plain cement plaster finish at all heights and below highest plinth level in Cement Mortar (CM) 1:4 (1 part cement: 4 parts sand- 50% coarse and 50% fine) to the walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves etc, over any brick or concrete surface as specified including scaffolding, curing and finishing smooth, complete as directed.

Water Proofing for Entire Toilet Area- Compounds ( Fosroc, SIKA, protekta or equivalent )

PLUMBING-A

Supply and fixing, "JAQUAR" or equal approved Indian make White Colour glazed complete set, Wall mounted european water closet with concealed dual flushing cistren, Seat & Cover, non-corrosive hinges, bolts, nuts, fixing the Closet suit over cantilever bracket with necessary bolts, nuts, making holes in masonry or concrete, restoring the damaged portion to their original condition using required materials, testing the installation etc.complete and as directed by the Client / PMC

Providing and Fixing of Physically challanged Ewc with Complete support bars

Supply and fixing, "Parryware" or equal approved make White color glazed Rectangle Washbasin of 500 x 400mm size with a pair of Anchor Bolt type brackets, fixing to Wall dado with required materials like teak wood plugs, packing pieces, screw nails, testing etc complete.

Supply and Fixing of Indian Closet with Slim line tank

Supply and fixing, "Parryware" or equal approved make ivory color glazed Large Back Urinal with a pair of Anchor Bolt type brackets, fixing to Wall dado with required materials like teak wood plugs, packing pieces, screw nails, testing etc complete.

Supply and fixing, Jaquar or equal approved make Chrome plated exposed pattern Toilet Paper holder with Chromium Plated roller, including fixing over Wall tile dado using suitable size non-corrosive screw nails, teakwood plugs etc. complete.

Supply and fixing, Jaquar or equal approved make Chrome plated exposed pattern soap dish, including fixing over Wall tile dado using suitable size non-corrosive screw nails, teakwood plugs etc. complete.

Supply and fixing, Jaquar or equal approved make Chromium Plated Towel rail with brackets 20mm dia and 600mm long, including fixing over Wall tile dado using suitable size non-corrosive screw nails, teakwood plugs etc. complete.

Supply and fixing, Jaquar or equal approved make Chromium Plated Towel ring with brackets, including fixing over Wall tile dado using suitable size non-corrosive screw nails, teakwood plugs etc. complete.

Supply and fixing, 600 X 600mm size Mirror made out of Imported plate glass 5 to 5.5 mm thick, making holes at corners, providing 40mm long Chromium plated detachable head screws providing 12mm thick commercial plywood to back of Mirror, apply 2 coats of enamel paint over 1 coat of primer to surfaces of wood, installing the Mirror over tile dado using required fixing materials etc. complete.

Supply and fixing, jaquar / Approved make Chromium Plated Coat hook, fixing to Wall dado or fixing to Wooden shutter, using teak wood plugs, screws etc. complete. Jaquar make.

Supply and fixing, Nirali / Prince /Approved make Single bowl and Single drain board Stainless Steel Sink with Waste coupling, providing bracket made of 32 x 32mm size and 4mm thick MS Angle, grouting the bracket in masonry using Cement concrete 1:2:4 mix, fixing the Sink and Drain board to perfect level to match with cooking platform in Kitchen, etc. complete. Nirali make, Elegance model.

Supply and fixing, following Chromium Plated Bathroom fittings of Jaquar make- Florentine range, fixing to threaded ends of pipe work using Teflon and twine, testing for leak proof etc. complete.

Pillar Cock with aerator.

Angular Stopcock with CP Tube and Wall Flange.

32mm size, Waste Coupling.

Bottle Trap with extension piece.

Health Faucet Bibcock with 1000mm long flexible tube with Wall hook.

20mm Dia. Concealed stop cock

15mm size C.P. Tube with nuts, washers, etc., for connecting outlet of heater & Pillar cock to hotwater pipework.

Swivel type sink cock

PLUMBING-B

Supply and fixing, Astral/Supreme/ Finolex make UPVC Pipes conforming to IS 4985/ IS 13592 SWR TYPE B and PVC Pipe specials like bends, Tee, Y-junction with or without door, Vent cowl, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., , etc., complete.

I. Pipes Inside Toilet Areas

Using 40mm dia pipe - IS 4985 (6kg class) for Wash basin (Concealed in wall)

Using 75mm dia pipe - IS 4985 (6kg class) for toilet waste pipe (Buried in Toilet portion)

Using 110mm dia pipe - IS 4985 (6kg class) for toilet soil pipe (Buried in Toilet portion)

Supply and fixing, approved make 110mm dia PVC factory made Floor trap with water seal of 50mm and having multiple inlets and 75 dia outlet, fixing in position, laying cement concrete to 75mm alround in 1:3:6 mix using brick jelly to full depth of trap / sump, supplying and fixing SS grating of suitable size over trap / sump at 4mm below Floor level testing to water tightness, including providing fiber glass mating at bottom, inlet and outlet etc. complete.

Supplying Pan connector made out of PVC with 110 or 90 or 75mm dia outlet, fixing to pipe work with rubber ring and other necessary materials, testing, to water tightness etc. complete.

Providing and laying concrete with 1:4:8 mix using 20mm size stone aggregate all around for buried soil and waste pipes including centring and shuttering and any mansory supports from slabs or firm ground,curing complete for the pipes including providing and removing temporary form work etc. complete.

75mm nominal dia pipe 75mm thick alround

110mm nominal dia pipe 75mm thick alround

DOMESTIC WATER SUPPLY PIPE WORK:

Supplying and fixing Astral / Ashirvad make CPVC pipes (SDR 11 grade) and pipe specials like Coupler, reducer, elbow, tee and brass male/ female threaded pipe specials to connect bath room fittings, union, by pass bend with all type of Special flanges and special fittings to connect with de-similar materials like G.I or any other material, cutting the pipes, fixing the pipe specials using solvent cement solution supplied by the same manufacturer, making water tight joints, making holes and cutting grooves in walls restoring the damaged portions to their original condition using required materials,

Using 20mm dia (ID) pipe. (Concealed in wall) for domestic water inToilet & Hand wash areas

Supplying and fixing approved make CPVC union, testing for leak proof, etc. complete.

20mm dia

25mm dia

32mm dia

VARIABLE REFRIGERANT FLOW SYSTEMS (VRF) ACR/VB/SCPL/2425500 (2ND FLOOR)

Supply, Installation, testing and commissioing of VRV Indoor air conditioning units with direct driven fan, high efficient filter, inbuilt microprocessor thermostat, electronic expansion valve,Cordless remote control for all indoor units given below. The capacities are as mentioned below:-

Four way Cassettes

Cooling Capacity:2.80 TR

Cooling Capacity:2.00 TR

Cooling Capacity:1.7 TR

Cooling Capacity:1.3 TR

Cooling Capacity:1.0 TR (compact)

One way cassette

Cooling Capacity:2.00 TR

28 HP top discharge

Supply & Installation of cardless remote

Supply and installation of Refnet joints (Refrigerant branch kit) for taking branches between two outdoor units and various indoors as per VRV scheme drawings. The refnet joint set consists of both liquid and gas line branch kits.

Supply ,Installation, Testing and commssioning of BMS compatible Network Interface and Central remote Controller for monitoring and controlling the VRF equipment in third party BMS.

Supply ,Installation, Testing and commssioning of Treated Fresh air unit of capacity 5.5 TR capacity 800 cfm

LOW SIDE WORKS

Supply and erection of Hard drawn Refrigerant Copper pipes to integrate outdoor / indoor units. The rate shall inclusive of closed cell nitrile rubber insulation for copper pipes. The pipe sizes and insulation thickness as follows. ( suction pipe should be 19mm thick nitrile rubber hose with class o insulation & liquied pipe line should be 13 mm thick nitrile rubber hose with class o insulation )

6.4mm dia with insulation

9.5mm dia with insulation

12.7mm dia with insulation

15.9mm dia with insulation

19.1mm dia with insulation

22.2mm dia with insulation

28.6mm dia with insulation

34.9mm dia with insulation

41.3mm dia with insulation

44.5 mm dia with insulation

Supply and erection of following sizes perforated type cable tray made out of GI sheet folded to required shape with adequate number of supports for Insulated refrigerant pipe and cable .

200mm wide

Supply and laying of 3c X 1.5 Sqmm copper sheld flexble cable with PVC conduit - Communication and Control cabling between indoor and outdoor units.

Supply and fixing of 13mm thick closed cell nitrile rubber insulated PVC pipe (for drain) cut to required length and installed with all screw joints, reducer, necessary elbows and tees.

63 Amps isolator

4c x 16 sqmm cu armoured cable

In Line fan for toilet

1000 cfm fan 20 mm static

600 cfm fan 25 mm static

Supply ,Installation, Testing and commssioning of Exhaust air grilles

Supply ,Installation, Testing and commssioning of 24G GI Rectangular ducting with necessary supports, Threaded rod etc. for Toilet

PVC pipe for fresh air ducting 6kg/cm2 with 9 mm thick insulation

300 mm dia

200 mm dia

100 mm dia

Additional 2Tr hi wall Split unit with Suppy and fixing of server room area with over flow drain pipe and copper pipe, installation & erectioning, separate pump for Air conditioner.

VARIABLE REFRIGERANT FLOW SYSTEMS (VRF) ACR/VB/SCPL/2425500 (3rd FLOOR)

Supply, Installation, testing and commissioing of VRV Indoor air conditioning units with direct driven fan, high efficient filter, inbuilt microprocessor thermostat, electronic expansion valve,Cordless remote control for all indoor units given below. The capacities are as mentioned below:-

Four way Cassettes

Cooling Capacity:2.80 TR

Cooling Capacity:2.00 TR

Cooling Capacity:1.70 TR

Cooling Capacity:1.5 TR

Cooling Capacity:1.0 TR

Cooling Capacity:0.80 TR ( compact)

One way cassette

Cooling Capacity:2.00 TR

28 HP top discharge

Supply & Installation of cardless remote

Supply and installation of Refnet joints (Refrigerant branch kit) for taking branches between two outdoor units and various indoors as per VRF scheme drawings. The refnet joint set consists of both liquid and gas line branch kits.

Supply ,Installation, Testing and commssioning of BMS compatible Network Interface and Central remote Controller for monitoring and controlling the VRF equipment in third party BMS.

Supply ,Installation, Testing and commssioning of Treated Fresh air unit of capacity 5.5 TR capacity 800 cfm

LOW SIDE WORKS

Supply and erection of Hard drawn Refrigerant Copper pipes to integrate outdoor / indoor units. The rate shall inclusive of closed cell nitrile rubber insulation for copper pipes. The pipe sizes and insulation thickness as follows. ( suction pipe should be 19mm thick nitrile rubber hose with class o insulation & liquied pipe line should be 13 mm thick nitrile rubber hose with class o insulation )

6.4mm dia with insulation

9.5mm dia with insulation

12.7mm dia with insulation

15.9mm dia with insulation

19.1mm dia with insulation

22.2mm dia with insulation

28.6mm dia with insulation

34.9mm dia with insulation

41.3mm dia with insulation

44.5 mm dia with insulation

Supply and erection of following sizes perforated type cable tray made out of GI sheet folded to required shape with adequate number of supports for Insulated refrigerant pipe and cable .

200mm wide

Supply and laying of 3c X .1.5 Sqmm copper sheld flexble cable with PVC conduit - Communication and Control cabling between indoor and outdoor units.

Supply and fixing of 9mm thick closed cell nitrile rubber insulated PVC pipe (for drain) cut to required length and installed with all screw joints, reducer, necessary elbows and tees.

63 Amps isolator

4c x 16 sqmm cu armoured cable

In Line centrifugal fan for toilet

1000 cfm fan 25 mm static

600 cfm fan 25 mm static

GI ducting for Toilet 24 G

Exhaust air grilles

Supply ,Installation, Testing and commssioning of 24G GI round ducting with necessary supports, Threaded rod etc. TFA unit.

300 mm dia

200 mm dia

100 mm dia

Electrical Work For 2nd Floor

WIRING SYSTEM

POINT WIRING

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire withpainting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End (SD-259)

One (1) light point controlled by a 6A Modular type switch

Set of two (2) light points controlled by a 6A Modular type switch

Set of three (3) light points controlled by a 6A Modular type switch

Set of Four (4) light points controlled by a 6A Modular type switch

One (1) Fan Point Controlled by a 6A switch with 2Module Electronics Regulator, Fan hook box.

Two (2) Fan Point Controlled by a 1No 6A switch with 1No 2Module Electronics Regulator, Fan hook box.

One (1) Fan Point Controlled by a Two (2) 6A 2Way switch with Electronics Regulator, Fan hook box.

One (1) light point controlled by a 2Nos of 6A 2Way Modular type switch

One (1) 6A Socket,Switch in Lighting Switch Box (Board Plug)

One (1) Calling Bell point controlled by a 6A Modular type switch

One (1) light point,Ex.Fan controlled by a 6A Modular type switch

LIGHTING CIRCUIT MAIN

Providing all materials, accessories and labour for wiring with conduits and accessories for light / fan circuit main using PVC insulated stranded copper conductor wires of 650V grade drawn through heavy gauge FRLS PVC CONDUIT for Concealed, MS Conduit for Open Wiring using necessary conduit accessories complete.The circuit main shall be measured in running metres from respective distribution board upto first lighting switch board only ( further onwards, it shall be deemed to be included in point wiring).

2 x 4.0sqmm + 1x 2.5sqmm (earth) wires in Suitable FRLS PVC CONDUIT for Concealed, MS Conduit for Open Wiring (FROM LDB/PDB TO 6/16A SOCKETS)

2 x 2.5sqmm + 1x 1.5sqmm (earth) wires in Suitable FRLS PVC CONDUIT for Concealed, MS Conduit for Open Wiring (FROM LDB/PDB TO SWITCH BOX, 6A Scokets)

3Core x 2.5sqmm Copper Flexiable Cable in Suitable FRLS PVC CONDUIT for Concealed, MS Conduit for Open Wiring (FROMUPSDB TO WORK STATION SOCKETS)

POWER RECEPTACLES

Renewal by Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD -373)

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End( SD-379)

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD-385)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD-397)

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) (SD-143)

Supply and fixing of 25A Flush type Wall Socket 25A FP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) (DATA-B)

Supply and fixing of 32A FP MCB in suitable sheet steel enclosure with inter connection.(Make Legrand /Hager Make ) (DATA –C)

Supply and fixing of 63A FP MCB in suitable sheet steel enclosure with inter connection.(Make Legrand /Hager Make ) (DATA –D)

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.(SD-621)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-522)

Electrical Work For 3rd Floor

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire withpainting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End (SD-259)

Supply and run of 2 of 4 Sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sqmm copper wire painting suitable colour (S.D.56)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour (Sd -336)

Supply and Run of 3 core 2.5 sqmm FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with inter connection (DATA-A)

Renewal by Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD -373)

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End( SD-379)

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD-385)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD-397)

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) (SD-143)

Supply and fixing of 25A Flush type Wall Socket 25A FP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) (DATA-B)

Supply and fixing of 32A FP MCB in suitable sheet steel enclosure with inter connection.(Make Legrand /Hager Make ) (DATA –C)

Supply and fixing of 63A FP MCB in suitable sheet steel enclosure with inter connection.(Make Legrand /Hager Make ) (DATA –D)

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.(SD-621)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-522)

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-659)

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 6 sq.mm copper wire with painting of suitable colour (SD-62)

supply and fixing of 36W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (DATA-E)

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (SD-441)

Supply and fixing of 1mt 15W Track mounted LED light fitting with 2nos track light ( Havells Make UNECO ) with PVC unsheathed copper leads from terminals to the fitting (DATA -F)

Supply and fixing of LED 20W LED Mirror light fitting on wall with PVC unsheathed copper leads from terminals to the fitting. (DATA-G)

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp (SD -486)

Supply and fixing of LED 10W LED cove light with PVC unsheathed copper leads from terminals to the fitting. (DATA-H)

Supply and laying of 20mm dia PVC rigid pipe with PVC accessories on wall / ceiling/floor. (DATA-H)

Supply and laying of 25mm dia PVC rigid pipe with PVC accessories on wall / ceiling/floor. (DATA-I)

NETWORK SYSTEM

NETWORK

Supply & installation of 2Nos Data Socket.1No Telephone outlet in G.I or moulded outlet box with cover plate as required including the termination of CAT-6

Supply & installation of Dual Data Socket outlet in G.I or moulded outlet box with cover plate as required including the termination of CAT-6

Supply & installation of Telephone Socket. outlet in G.I or moulded outlet box with cover plate as required including the termination of CAT-6

NETWORK/TELEPHONE/SPEAKER SYSTEM

Supply,laying of heavy gauge rigid PVC conduit with all conduit accessories PVC junction/pull boxes, G.I fish wire, fixing accessories etc as required for telephone and networking complete. The rates shall include chasing of walls, floors etc & plastering the chased portion as required.

20mm dia(TV/TEL)

25mm dia

Supply Laying for tv system using Co-axial cable in existing conduit.

Supply Laying for CAT-6 cable in existing conduit.(CCTV,NETWORK)

Supply,Installation, testing and commissioning of 4Pair Telephone Wire in Suitble Conduit

Supply, Installation, testing and commissioning of 2Pair speaker Wire in Suitble Conduit

Supply, Installation, testing and commissioning of Indoor CCTV Camera

Supply,Installation, testing and commissioning of Outdoor CCTV Camera

Supply,Installation, testing and commissioning of clip on TV outlet mounted on a GI outlet box with front plate and all necessary accessories complete as reqd including the termination of wires.

Supply,Installation, testing and commissioning of Ceiling/Wall Mounted Speaker and all necessary accessories complete as reqd including the termination of wires.

Installation, testing and commissioning of NVR/DVR and all necessary accessories complete as reqd including the termination of Cable/wires.(Supply by Client)

Installation, testing and commissioning of Mike,Speajer,Amplifier and all necessary accessories complete as reqd including the termination of wires.(Supply by Client)

MAIN BOARD WORKS

M.V.DISTRIBUTION BOARD

Supply, installation, testing and commissioning of M.V.Distribution Boards suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be free standing, floor mounting, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, meters etc. shall be accommodated in a modular multi tier arrangement. A minimum of 400mm clearance shall be given from the floor level to the bottom most termination point. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all round the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Flexible cable links are not acceptable. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. The copper earth strip of 25mm x 3mm shall run throught out perimeter of the bottom of the panel.

MAIN SWITCH BOARD (MSB)

MSB Comprises

INCOMER

One (1) - Incoming feeder having, One (1) - Set RYB phase indicating lamps with fuse.Three (3) - Set indicating lamps with fuses, One set of 250A TPN Aluminium bus bar, One (1) - CBCT with ELR (30-300mA),One (1) - Surge Protection Relay (B+C) Make: OBO, One (1) - (0-250A) Digital Multi Data Meter (V,I,KW), Three(3) - Current transformer rated 250/5A, 10VA/CI 0.5 for metering, One (1) - 250A, 4P MCCB - Outgoing feeders Each having Two (2) - 125A, TPN, MCCB with O/L.E/F Releases, Seven(7) - 63A, TPN, MCCB with O/L.E/F Releases.

DG MAIN SWITCH BOARD (DG-MSB)

DG-MSB Comprises

INCOMER

One (1) - Incoming feeder having One (1) - Set RYB phase indicating lamps with fuse, Three (3) - Set indicating lamps with fuses, One set of 250A TPN Aluminium bus bar, One (1) - 250A, 4P ATS, 250A 4P MCCB, Outgoing feeders Each having, Three(3) - 125A, 4P, MCCB with Indication Lamps, DG Main Switch Board as above

MAIN UPS PANEL

MAIN UPS PANEL comprises: Incoming feeder having One (1) - Incoming feeder having One (1) - Set RYB phase indicating lamps with fuse Three (3) - Set indicating lamps with fuses One set of 125A TPN Aluminium bus bar One (1) - 125A 4P MCCB Outgoing feeders Each havin Three (3) 63A, 4P ,10kA MCB ELDB as above

MAIN EM.LIGHT PANEL

MAIN EM.LIGHT PANEL comprises: Incoming feeder having One (1) - Incoming feeder having One (1) - 63A DP MCB Outgoing feeders Each having Three (3) 32A, DP ,10kA MCB MAIN EM.LIGHT PANEL as above

M.V.CABLES

Laying, testing and commissioning of 1100V grade PVC insulated PVC sheathed steel wire/ tape armoured aluminium conductor cable for mains and sub mains as per specifications and drawings. The cables shall be laid in concrete trenches or buried directly underground or on cable trays. The concrete trenches will be measured separate. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. the unit cost of the cable shall include clamps, fasteners etc. as required for proper installation.

3.5C X 150 Sqmm XLPE Al. Armoured cable (FROM TNEB METERING PANEL TO DG -MSB PANEL, FROM 160KVA DG SET TO DG -MSB PANEL)

3.5C X 50 Sqmm XLPE Al. Armoured cable (FROM MSB PANEL TO UPS)

4C X 25 Sqmm XLPE Al. Armoured cable

Provide and install cable terminations for the above cables including single compression type chrome plated brass glands and lugs(crimping type), PVC taping as required and all accessories complete.

3.5C X 150 Sqmm XLPE Al. Armoured cable (FROM TNEB METERING PANEL TO DG -MSB PANEL, FROM 160KVA DG SET TO DG -MSB PANEL)

3.5C X 50 Sqmm XLPE Al. Armoured cable (FROM MSB PANEL TO UPS)

4C X 25 Sqmm XLPE Al. Armoured cable

UPS & INVERTOR

Supply, Installation of 20KVA On Line UPS Input 3PH/Output 3PH with 30Minutue Battery Back-up (For Computer,Server Racks, CCTV, Etc) Including all accessories Like,Battery,Stand,Connecting Accessories, Etc as required.(Make :Socomec/Eaton)

Supply, Installation of 5KVA On Line UPS Input 1PH/Output 1PH with 30Minutue Battery Back-up (For Em.Lights Etc) Including all accessories Like,Battery,Stand,Connecting Accessories, Etc as required.(Make :Socomec/Eaton)

EARTHING SYSTEM

Providing, installing, testing and commissioning of Chemical Earthing station including excavation, back filling, construction of inspection chamber, chamber cover (C.I), disconnecting link etc. as per specifications and in conformity with IS 3043 (latest). Make: OBO

Providing and laying earthing conductors of GI strip/wire including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. The rate shall include all supports, accessories and hardware necessary for proper installation.

25 x 3mm G.I tape.

8 SWG G.I wire

Providing and laying earthing conductors of copper strip/wire including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. The rate shall include all supports, accessories and hardware necessary for proper installation.

25 x 3mm Cu tape

8 SWG Cu wire.

MISCELLANEOUS ITEMS

Providing and fixing in position the best quality danger boards of approved shape and size as specified by the local electrical authorities written in English and Local Language

Removing Existing Lighting & Power Wirings, Switch Boxex, DB's

DECORATIVE LIGHT FIXTURES

False ceiling

Providing and fixing 600 x 600mm grid ceiling in true horizontal level modular false ceiling at 2.7 M From Finished floor Level using hot dipped galvanised steel sections. Exposed surface chemically cleaned capping prefinished in baked polyester paint .Shilloute/ Black Reveal grids and Shadow line wall angle of size 3000mmx19mmx19mm used in the periphery of the ceiling fixed to the partition, R.C.C.columnand walls using screws at 600mm c/c. Main runner of size15mmx32mmx3000mm suspended at 1200 c/c, using 2mm/3mm dia.GI butterfly wire hanger safely fixed to the structural soffit of the RCC slab using 6mm anchor fastener at every 1200mm c/c (max.) and 1200mm long cross tee of size 15mmx27mmx1200mm to be interlocked between main runner at 600mm c/c (max.) to form a grid of 600mx600mm. Tile to have 0.5 NRC sound.Make USG/Daiken or Equal approved make.

FLUSH FALSE CEILING: Gypsum board suspended ceiling with proprietary GI steel suspension system as recommended by manufacturer (Saint Gobain / GYPROC) frames & accessories, 12.5mm thick gyp board sheets, screws, taping, joint grout finished with priming top coat, ready to receive paint. The rate shall be inclusive of making cut-out for light fixtures, diffusers, grills etc. and making good 12x12mm groove at all junctions of gypsum board ceiling w/ walls. Include proprietary GI corner guard tape as/detail and Client / Engineer approval.

FLUSH FALSE CEILING: Calcium silicate board suspended ceiling with proprietary GI steel suspension system as recommended by manufacturer (Saint Gobain / GYPROC) frames & accessories, 12.5mm thick gyp board sheets, screws, taping, joint grout finished with priming top coat, ready to receive paint. The rate shall be inclusive of making cut-out for light fixtures, diffusers, grills etc. and making good 12x12mm groove at all junctions of gypsum board ceiling w/ walls. Include proprietary GI corner guard tape as/detail and Client / PMC

Providing and fixing 600 x 600mm grid ceiling at toilets in true horizontal level modular false ceiling at 2.7 M From Finished floor Level using hot dipped galvanised steel sections. Exposed surface chemically cleaned capping prefinished in baked polyester paint .Shilloute/ Black Reveal grids and Shadow line wall angle of size 3000mmx19mmx19mm used in the periphery of the ceiling fixed to the partition, R.C.C.columnand walls using screws at 600mm c/c. Main runner of size15mmx32mmx3000mm suspended at 1200 c/c, using 2mm/3mm dia.GI butterfly wire hanger safely fixed to the structural soffit of the RCC slab using 6mm anchor fastener at every 1200mm c/c (max.) and 1200mm long cross tee of size 15mmx27mmx1200mm to be interlocked between main runner at 600mm c/c (max.) to form a grid of 600mx600mm. Tile to have 0.5 NRC sound .Tile sample to be approved by Client / PMC. (Make - Daikan, AMF, USG)

Partition

GYPSUM BOARD PARTITION WITH PUTTY AND PAINT FINISH - 75mm Thk: Providing and fixing gypsum board partitions using GI stud of sizes - 50 gypsteel ceiling & Floor channel, with Vertical 48mm Gypsteel stud and horizontal noggin channel to be provided as per manufacturer's specifications. cost includes Hardwood to be inserted at door opening to fix door frames, skirting etc. 12.5mm tapered edge gypsum board to fixed to the framework with dry wall screws, jointed and finished with required filler, paper tapefinsiher and primer suitable for gypsum plasterboards. Cost of the partition to include for glass wool Insulation 48Kg/m2 density infill for the complete area of the partition. Installation of the glass wool shall be protected with Tissue covering taped to the frame or plastic sheet taped to the frame on one side. Cost of the partition shall be inclusive of finishing the partition with 2 coats of putty, one cae of primes and three coats of interior emulsion paint, necessary additional bracing of the frames at the slab level for stability, making necessary cut-outs for electrical / data and other service outlets and also for passing through ducts, cable trays and other service requirements. additional 12mm ply backing at TV or any shelf hanging areas. Cost to include applying fire and acoustical sealants at periphery of partitions & cut outs of services from both sides as per manufactures specifications. Make: Saint gobain Gyproc /USG or equivalent.

75mm thk. PLYWOOD PARTITION WITH LAMINATE FINISHED, Providing and fixing ply wood Partition till bottom of roof/Beam using 12mm thk commercial ply wood partition finished with 1mm thk. laminate (Merino or equivalent make) on both side, with 50 x 50mm Aluminium box section as suppots at 600 x 600mm c/c as per detail drawing. All ply woods (Century/Greenply or equivalent make) used for construction should be coated with anti termite coating.Cost of the partition to include for glass wool Insulation 48Kg/m2 density infill for the complete area of the partition. Installation of the glass wool shall be protected with Tissue covering taped to the frame or plastic sheet taped to the frame on one side. Cost of the partition shall be inclusive of necessary cut-outs for electrical / data and other service outlets. Cost to include applying fire and acoustical sealants at periphery of partitions & cut outs of services from both sides as per manufactures specifications.

PLYWOOD WITH FLUTTED PANEL WALL PANELLING ( 72mm Thk) Providing and fixing ply wood panelling on wall using 12mm thk ply wood finished with 10mm thk. Flutted panl, with 50 x 50mm Aluminium box section as suppots at 600 x 600mm c/c as per detail drawing. All ply woods (Century/Greenply or equivalent ) used for construction should be coated with anti termite coating. Cost of the partition shall be inclusive of necessary cut-outs for electrical / data and other service outlets. Cost to include applying fire and acoustical sealants at periphery of partitions & cut outs of services from both sides as per manufactures specifications and . Make: Saint gobain / Gyproc /USG.or equal make

PLYWOOD WITH FLUTTED PANEL WALL PARTITION ( 94mm Thk) Providing and fixing ply wood Partition using 12mm thk ply wood finished with 10mm thk. Flutted panl on both side of 50 x 50mm Aluminium box section as suppots at 600 x 600mm c/c as per detail drawing. All ply woods used for construction should be coated with anti termite coating.Cost of the partition to include for glass wool Insulation 48Kg/m2 density infill for the complete area of the partition. Installation of the glass wool shall be protected with Tissue covering taped to the frame or plastic sheet taped to the frame on one side. Cost of the partition shall be inclusive of necessary cut-outs for electrical / data and other service outlets. Cost to include applying fire and acoustical sealants at periphery of partitions & cut outs of services from both sides as per manufactures specifications and . Make: Saint gobain Gyproc /USG or equivalent make.

PARTLY FLUSHED PARTLY GLAZED PARTITION. Provinding and fixing 1500mm high partly glazed party laminate finished partition using 50 x 50mm aluminum box support. partly glazed partly flushed glass partition.

Aluminum Framed Fixed Glazed Partition Supply and installation of Modular Three paneled partition having member size of 45 x 25 mm for 10mm thick toughened glass in top and bottom and 10mm thk. Fluted Panel partition in middle as per detail drawing using Profiles Like I Profile, T Pro & L Profiles. Supply & Fixing of glazing of 10mm thick toughened glass glazing fixed with Around beading system aluminium member as per manufacturer specification. Cost to include, End cap all around the Aluminium member. Product to be certified by Manufacturer's Representative to Fix the Glass partition & glass door on the existing Ply wood partition necessary wooden framing to be inclusive in the cost. Height to be considered: 2700mm. Make - Dorma or equivalent

Providing & Fixing 4mm thk Lacquered Glass writting board in gypsum board partition (Saint Gobain) on over the plywood backing. Colour to be approved by the Client / PMC. Cost to include Adhesive: Clear Neutral Silicon of make GE winsil 20 / silpruf or DOW CORNING 789/995; Procedure: Apply all along the periphery & Horizontal lines @ 50mm c/c across the full surface on the backing ply, of required strength to hold the glass safely. Glass shall be precisely cut to size & edges to be machine polished. cost to include 12mm Plywood backing with antitermite treatment and Bottom-line; coner guard for columns 18mm x 18mm aluminium fixed with 3M double side tape and hat channel of 5 - 10mm as per drawing. Rate to be inclusive of wastage. colour as per architects design. (2250mm x 600mm)

Providing & Fixing 6mm thk Lacquered Glass wall panelling (Saint Gobain) on over the plywood backing. Colour to be approved by the Architect. Cost to include Adhesive: Clear Neutral Silicon of make GE winsil 20 / silpruf or DOW CORNING 789/995; Procedure: Apply all along the periphery & Horizontal lines @ 50mm c/c across the full surface on the backing ply, of required strength to hold the glass safely. Glass shall be precisely cut to size & edges to be machine polished. cost to include 12mm Plywood backing with antitermite treatment and Bottom-line; coner guard for columns 18mm x 18mm aluminium fixed with 3M double side tape and hat channel of 5 - 10mm as per drawing. Rate to be inclusive of wastage. colour as per architects design.

Providing and fixing Magnetic pinup board of size as indicated in drawing, over the exisitng partition frame work made out of alumnium frame of size 50 x 25mm at 60cm centres bothways fixed to wall with necessary screws. 8mm thick com ply backing with necessary screws, at locations as shown in dwg using 9mm thick soft board raped with poly propylene cloth (basic cost of cloth - 400 per rmt)

Supply and Fixing of 12mm thick Toughened glass (Saint Gobain) with neccesary frames including all the profiles and sections with patch fittings of (Osram or equivalent make).costing to include all the shifting and scafolding works.

Supply and Fixing of 12mm thick Toughened glass (Saint Gobain) with neccesary frames including all the profiles and sections with patch fittings of (Osram or equivalent make).glazing Cover the existing glazing for safety in 2nd & 3rd Floor. costing to include all the shifting and scafolding works.

Joinery

Aluminium Framed Glass paneled door - Providing and fixing Aluminium framed door frame of size 45mm x 45mm size and 35mm thick 100mm wide aluminum shutter frame with 10mm thick toughened glass panel. 4 Nos of Hinges, Door Closer-TS 3000, Handle- 55mm Narrow stile mortise Lock & Half Moon Door stopper-Geze Make Aluminum frame -Red plus or equivalent make.

Aluminium Framed Flush Shutter door - Providing and fixing Aluminium framed (45mm x 45mm) with Aluminum shutter frame to hold 10mm thick toughen glass Inlay. 4 Nos of Hinges, Door Closer-TS 3000, Handle- 55mm Narrow stile mortise Lock & Half Moon Door stopper-Geze Make Aluminum frame - Red plus or equivalent make.

Country wood Framed Flush Shutter with Laminate finish- Providing and fixing country wood frame of size 150mm x 75mm finished with duco Paint and 35mm thick solid core single leaf "FLUSH SHUTTERS" with laminate finish on both side all shutter edges needs to be finished with teak wood beading with duco paint to match laminate.Cost ot include 4 Nos of Hinges, Door Closer-TS 3000, Handle- 55mm Narrow stile mortise Lock & Half Moon Door stopper-Geze Make (Archide / Green or equivalent make).

Country wood Framed Flush Shutter with Laminate finish one side and Flutted panel other side - Providing and fixing country wood frame of size 150mm x 75mm finished with duco Paint and 35mm thick solid core single leaf "FLUSH SHUTTERS" ( Archid / Green or equivalent )with laminate finish on One side and 10mm thk. flutter panel on other side, all shutter edges needs to be finished with teak wood beading with duco paint to match laminate.Cost ot include 4 Nos of Hinges, Door Closer-TS 3000, Handle- 55mm Narrow stile mortise Lock & Half Moon Door stopper-Geze Make Archid / Green or equivalent make.

Country wood Framed Flush Shutter with Laminate finish- Providing and fixing country wood frame of size 100mm x 62.5mm finished with duco Paint and 35mm thick solid core single leaf "FLUSH SHUTTERS" with laminate finish on both side all shutter edges needs to be finished with teak wood beading with duco paint to match laminate.Cost ot include 3 Nos of Hinges, Handle- 55mm Narrow stile mortise Lock & Half Moon Door stopper-Geze Make (Merino or Archide / Century or equivalent make.)

Country wood Framed Flush Shutter with Slit view panel and Laminate finish- Providing and fixing country wood frame of size 100mm x 62.5mm finished with duco Paint and 35mm thick solid core single leaf "FLUSH SHUTTERS" with laminate finish on both side, having 150mm x 1800mm slit view panel and all shutter edges and glass edges needs to be finished with teak wood beading with duco paint to match laminate.Cost ot include 3 Nos of Hinges, Door Closer-TS 3000, Handle- 55mm Narrow stile mortise Lock & Half Moon Door stopper-Geze Make (Merino or Archide / Century or equivalent make)

Supply and fixing of "Fenesta Make " or Equivalent make Casement Windows at all levels made out from Unplasticised Poly Vinyl Chloride frame (UPVC) of natural colour (PRISTINE White) withCasement outer frame of size 56x48x30mm, mullion frame 58x56x22mm, shutter frame 54.5x56x36.5mm with wall thickness of 1.8mm(+/- 0.3mm) for casement. The section should be compatible for Single glazing using (Espagnolette) multipoint locking with Friction stays of SS304 grade.The gasket should be made of EPDM (Ethylene propylene dimonomer) with double gasket sealing and applying silicone sealants (GE make (or) Wacker Make) outside and acrylic sealent (suresealmake) inside 6mm thick brown tinted glass. The sections should be reinforced with GI Sheet of 1.5mm thick with suitable drainage grouting.

Providing and fixing Zebra blinds Dual Shade, Horizontal Stripes, Sheer and Solid Fabric, Light Control/Blackout Blinds, with drive unit end plug support brackets bottom rail ball chains all described as below but with fabric of approved shade colour and sample. Drive unit to be of moulded plastic with straight rectangle support pin and inserted into the tube end. It shall be driven by a ball chain pulley and can be positioned at right or left side of the shade. The shade when lowering or raising shall automatically be lockable from release of the ball chain by means of friction lock. End plug shall be moulded to plastic locking pin. The plug shall be inserted into the tube end. Support brackets shall be of zinc plated steel and provided with moulded plastic covers and used in right of left hand positions differentiated by acceptance of the rectangular drive unit support or the ground idler plug pin. Roller tube shall be made out of roll formed steel of thickness suitably protected against corrosion and keyway integrated with the tube to accommodate the spline, outside diameter of the roller tube shall be 25mm. Bottom rail shall be stiffening element inserted into the bottom rod pocket. Tube to be of the material as approved out of timber, PVC, Steel of VB Bottom rail. Ball chain shall be of 2mm dia cord with actual balls moulded coaxially to it on 6mm pitch to form ball chain. Make - Vista / hunter douglas/ equivalant.

Providing and fixing Curtains made of linen (Blackout), Base Rate of 500/sq.ft + tax. Curtains slide onto the rod through a pocket at the top.

Fire Extinguisher

New ABC 6Kg Capacity Fire Extinguisher stored Pressure Type, Filled with Monoammonium Phosphate 40% Powder Confirms to IS:14609, applicable on Class A,B,C and electrically Started Fires, with the fire Rating of 3A & 21B as per IS 15683 Fitted with control Squeeze grip valves, pressure gauges and special Helium Leak detection tested cylinder with ISI Mark. Make Usha or equivalent make

New CO2 type 4.5 Kg Capacity Fire Extinguisher filled with Co2 Gas as per IS 15222 with control discharge mechanism (Wheel Type Valve) fitted with 1 mtr. Hose and Horn applicable on Class B, C and electrically started fire with the rating of 21B confirms to IS 15683, bearing Seamless. Co2 Cylinder as per IS 7285 with PESO (Petroleum and Explosive Safety Organization) APPROVAL, bearing ISI Mark.Make Usha or equivalent make

RESGUARDO Clean Agent Type ‐ 2 kg Fire Extinguisher Filled with clean agent gas HFC 236 fa ,Specifications : Stored pressure type, Pressure gauge, Controllable discharge mechanism with nozzle. Applicable on class A,B & C , Fire Rating : 1A 21B, Operating Temperature ‐20°C to +60° C. As per IS15683 : 2018 with ISI Mark. Make Usha or equivalent make

FLOOR STAND FOR FIRE EXTINGUISHER - FOR S/P -CA-DCP -4,5,6,kgs. Make Usha or equivalent make

FLOOR STAND FOR FIRE EXTINGUISHER -FOR CO2 3 kg & 4.5KG. Make Usha or equivalent make

Floor stand for Clean Agent 2kg fire Extinguisher made of MS powder coated of size 15" x 7.5. Make Usha or equivalent make.

FLOORING WORKS

Supply & Laying of cut pile Polypropeline Carpet rolls in office Floors of Thickness - 12 - 15mm. . Protection of carpets from installation to hand over using double layer 80-100microns polythene sheets- Hego or equivalent make (Supply Basic Cost-Rs. 1800 / Sq.mtr)

Providing & fixing 75 mm high Anodised extruded aluminium skirting of make: "Bottom Line" over 12 mm thk ply backing. Model: Modular skirting - Easy Fix 75; all complete inclusive of all corner filler pieces and other applicable accessories. Make Dorma / Red Plus or Equivalent.

Transition Profile - Providing and fixing Bottom line Z channel - at locations where flooring transition is necessary as per architects approval. Cost to include Floor plug and Screws.Make Dorma / Red Plus or Equivalent.

Architrave at serrvice straircase opening Providing and cladding tile on wall as per architectural design and manufacturer's instruction. Cost to include base mortar upto 40 mm thk in ratio 1:5 (1 part of cement to 5 parts of sand) with appropriate level with architect's instruction. Laying tiles on a thin cement slurry paste and provide necessary protection alter laying. Tile joints to have 3 mm wide spacer filled with epoxy grout of approved colour by architect. Cost to include base wall/floor preparation to plumb level. Note: Any change in basic cost shall be deducted or added. - (Kajaria or equivalent Make).

Vitrified floor tile (1200x600mm) Providing and laying tile on floor as per architectural design and manufacturer's instruction. Cost to include base mortar upto 40 mm thk in ratio 1:5 (1 part of cement to 5 parts of sand) with appropriate level with architect's instruction. Laying tiles on a thin cement slurry paste and provide necessary protection alter laying. Tile joints to have 3 mm wide spacer filled with epoxy grout of approved colour by architect. Cost to include base wall/floor preparation to plumb level. Base rate of tile - Rs. 1000/sqm. + tax. Note: Any change in basic cost shall be deducted or added. - (Kajaria or equivalent make)

Vitrified floor Skirting (100mm) Providing and laying Vitrified tile Skirting on floor as per architectural design and manufacturer's instruction. Cost to include base mortar in ratio 1:2 (1 part of cement to 5 parts of sand) with appropriate level with architect's instruction. Tile joints to have 3 mm wide spacer filled with epoxy grout of approved colour by architect. Cost to include base wall/floor preparation to plumb level. Base rate of tile - Rs. 1000/sqm. + tax. Note: Any change in basic cost shall be deducted or added. - (Kajaria or equivalent Make)

Vitrified tile Wall cladding in breakout area above counter. Providing and laying of tiles of size 300x450mm or other approved size make and shade over back mortar C.M 1:4 (minimum thickness of 20 mm) for flooring. Tile joints shall be laid in line and level. The rate shall include all wastages, proper neat finishing of joints between skirting and wall etc. as per the client / PMC. ( make kajaria or equivalent ) Base rate of tile - Rs. 850/sqm. + tax

Vitrified floor tile (600mmx600mm) Providing and laying tile on floor as per architectural design and manufacturer's instruction. Cost to include base mortar upto 40 mm thk in ratio 1:5 (1 part of cement to 5 parts of sand) with appropriate level with architect's instruction. Laying tiles on a thin cement slurry paste and provide necessary protection alter laying. Tile joints to have 3 mm wide spacer filled with epoxy grout of approved colour by architect. Cost to include base wall/floor preparation to plumb level. . Note: Any change in basic cost shall be deducted or added. - (Kajaria / RAK / Somany or equivalent Make) Base rate of tile - Rs. 1000/sqm. + tax

Vitrified tile Wall cladding in Toilet area. Providing and laying of Vitrified wall tile Cladding of size 600x600mm or other approved size make and shade over 12mm thk. plaster. ( Plastering cost has to be included).Tile joints to have 3 mm wide spacer filled with epoxy grout of approved colour by architect. Cost to include base wall preparation to plumb level. Base rate of tile - Rs. 1800/sqm. + tax. Note: Any change in basic cost shall be deducted or added. - (Kajaria or equivalent Make)

Providing and fixing 20mm Thick and 150mm wide pre polished granite stone slab for Toilet ledge wall, Door bottom jam of approved shade and quality using 20mm thick granite beading, jointed with grey cement slurry mixed with pigment to match the shade of the slabs over and including a 20mm thick base of CM (1:4) rubbed, finally all exposed nosing has to be edge polised etc. (Basic rate - Rs.1500 / Sq.m)

Providing and laying of 8mm thick laminated wooden flooring in Cabinsa with necessary polythin backing and floor needs to be cleaned before laying the tiles. (Make - Hego or Equivalent ) (Basic price of tiles:Rs.1500/ SqM)

Painting works

Providing and applying ceiling emulsion paint (Asian paints premium emulsion) of approved make and desired shade , on new / old work including the preparation of surface for painting, applying one coat primer, two coat putty, rubbing the surface to make it levelling, finishing with two or more coats of premium emulsion paint, at thrid floor ceiling. Cost to include material cost, labour cost, scaffolding etc., complete as per manufacturer’s specifications and as directed.

Providing and applying Wall emulsion paint (Asian paints premium emulsion) of approved make and desired shade , on new / old work including the preparation of surface for painting, applying one coat primer, two coat putty, rubbing the surface to make it levelling, finishing with two or more coats of premium emulsion paint, at thrid walls ceiling. Cost to include material cost, labour cost, scaffolding etc., complete as per manufacturer’s specifications and as directed.

Providing and applying Texture paint (Asian paints premium emulsion) of approved make and desired shade , on new / old work including the preparation of surface for painting, applying one coat primer, two coat putty, rubbing the surface to make it levelling, finishing with two or more coats of Luster paint, at thrid walls ceiling. Cost to include material cost, labour cost, scaffolding etc., complete as per manufacturer’s specifications and as directed. (Basic price of tiles:Rs.1200/ SqM)

Carpentary works

Reception table (1950W x 750D x 1050H) - Providing and Placing reception table made of 18mm thk.( Double ply) Commercial ply as per detail drawing. All exterior surface needs to be coved with 4mm thk. Acrylic solid surface. Inner sides needs to be finished with 1mm thk. Laminate. Draws made of 12mm & 6mm Ply with .8mm laminate finish. All slide should be soft close & edges has to be made smoother in 2mm thk. edge bind tape. ( Acrylic solid surface - LG or equivalent make)

Window jamb using 18mm.thk BWR ply with 1mm laminate finish on all exposed surface and .8mm thk. Laminate on inner side with 2mm thk edge binding tape.

Over Head storage in Pantry ( wall Mounted) Providing and fixing wall Providing and fixing open Display shelf in conference room wall As per detail drawing using 18mmthk ply finised with 1mm thk laminte as per detail drawing. All edges needs to be finished with 2mm thk. edge binding tape. Cost to include all materials, Labour and suitable supports.

Providing and fixing open Book shelf in Reading room wall As per detail drawing using 18mmthk ply finised with 1mm thk laminte as per detail drawing. All edges needs to be finished with 2mm thk. edge binding tape. Cost to include all materials, Labour and suitable supports.

Providing and fixing Wash basin under counter unit of 300mm wide 900mm high and 450mm deep using Water proof ply wood 18mm thk. finished with 1mm thk laminate on extrior surfaces and 1mm thk. laminate on inner sides as per detail drawing. All shiutter and draws edges needs to be finished with 2mm thk edge bind tape to batch laminate color. all hinges, slides needs to be hettich / hafele/equivalent soft close hinges. hadels as per Client / PMC.

Providing and fixing 12mm thk HPL urinal partition of size 1200 x 450mm using necessary water proof clamps.

MODULAR FURNITURES

MD ROOM

SUPPLY AND FIXING OF MD TABLE - Table Size - 3000W x 1200D x 750 H- - 50mm thick showing (Bottom 100mm) PLPB Tabletop and Legs with Edgeband finish along PVD Stirp, 18mm thick PLPB edgeband finish Modesty (Modesty Front elevation PVD Strip) - Side Storage 50mm thick PLPB top with edgeband finish along PVD Strip, 18mm thick PLPB edgeband finish Carcass and shutters, side storage comes 2 draws with cupboard. Supply of 3draw mobile pedestal 18mm thick PLPB Carcass with drawer facia all exposed edges are edgeband finish with central locking system.

REAR STORAGE - 50mm thick showing PLPB Edgeband finish tops, 18mm thick Edgeband finish PLPB carcass and shutters

4800W x 450D x 750 H

HOD/SVP/VP CABIN TABLE

SUPPLY AND FIXING OF HOD-SVP/VP TABLE - Table Size - 2400W x 1050D x 750 H - 50mm thick showing (Bottom 100mm) PLPB Tabletop and Legs with Edgeband finish along PVD Stirp, 18mm thick PLPB edgeband finish Modesty (Modesty Front elevation PVD Strip) - Side Storage 50mm thick PLPB top with edgeband finish along PVD Strip, Supply of side storage, Size - 18mm thick PLPB edgeband finish Carcass and shutters, side storage comes 2 draws and cupboard with lock and key

REAR STORAGE - 50mm thick Showing PLPB Edgeband finish tops, 18mm thick Edgeband finish PLPB carcass and shutters

850W x 450D x 750 H (SET OF 4)

AVP CABIN TABLE

DESKING SYSTEM TABLE- 50x50 MS powder-coated frame with 40X20 MS powder-coated connector legging system, Table top size 1800W x 900D x 750 H, 25mm thick PLPB table top with edge band finish, CNC Designed MS Powder coated front modesty

REAR STORAGE - 18mm Thick PLPB Edgeband finish carcasse and Shutters

850W x 450D x 750 H (SET OF 3)

CUBICLE TABLE

DESKING SYSTEM TABLE- 50x50 MS powder-coated frame with 40X20 MS powder-coated connector legging system, Table top size 1500W x 750D x 750 H, 25mm thick PLPB table top with edge band finish, CNC Designed MS Powder coated front modesty

REAR STORAGE - 18mm Thick PLPB Edgeband finish carcasse and Shutters

850W x 450D x 900 H

CONFERENCE TABLE - 25mm Thick PLPB Edgeband finish Table top, and Legs, 18mm thick double modesty provision for electrical and data

10000 W x 2700 D x 750 HHeight - Above the Tabletop center - White lacquer Glass

4500W x 1500D x 750 H

1500W x 900D x 750 H - Reading Room

900 dia W x 750 H - Reading room & resting room

MODULAR WORKSTATIONS - 75mm Thick x 1200 mm Height Aluminum powder-coated Modular Panels single raceway system (bottom of the panel) each seat has one white marker with one magnetic fabric board others are fabric boards, 25mm thick pre- lam particle board with edge band finish Table top size - 900W x 900W x 600D x 750 H (With pedestal storage unit) below the table tops all legs are 25mm thick pre lam particle board with edge band finish. Supply of 3draw mobile pedestal with central locking system.

PERSONEL SECERATARY CABIN TABLE

REAR STORAGE - 18mm Thick PLPB Edgeband finish carcasse and Shutters - 850W x 450D x 900 H (SET OF 2)

FREE STANDING STORAGE 18mm Thick PLPB Edgeband finish carcasse and Shutters -

850W x 450D x 900 H

CHAIRS

MD CHAIR - INFINITY HB CHAIR (BLACK) PU upholstery with high-density new foam and coil spring package inside Chrome fixed armrests with soft pad and 365mm chrome base 80mm traveling class 4 gas cylinder, BIFMA or SGS approved Tension tilt mechanism with upright lock function Extra mechanism wing to provide better stability Max Load Bearing: 225KGS

HOD CHAIR - 3286 CHAIR (BROWN) Back Frame structure made of Aluminium Seat & Back Upholstered with Microfiber & molded Fluffy Cushion Flip-flop armrest with PU Pad for wide seating 4 stage Locking Tilt mechanism Class 2 100 MM Hydraulic 330 mm Chrome base50 mm Twin superior Nylon castor

AVP/MANAGER - AIRYER HB CHAIR -3D PP ARMREST ADJUSTABLE HEADREST ADJUSTABLE PA BACK FRAME WITH HIGH-END PU FINISHED HIGH-END PU MOLDED FOAM SEAT CUSHION 3 POSITION LOCKING MECHANISM NYLON BASE WITH PA CASTOR

CUBICAL CHAIRS - MARVEL 2 MESH BACK 2D ADJUSTABLE HEAD REST ADJUSTABLE LUMBER SUPPORT ADJUSTABLE ARMREST WITH PU PAD PU MOULDED CUSHION SEAT SYNCHRO MECHANISM CLASS 4 GASLIFT 100MM ( BIFMA CERTIFIED) TC COVER NYLON BASE (BIFMA STANDARD) NYLON CASTOR ( BIFMA CERTIFIED)

WORKSTATIONS CHAIRS - MARVEL 2 MESH BACK 2D ADJUSTABLE HEAD REST ADJUSTABLE LUMBER SUPPORT ADJUSTABLE ARMREST WITH PU PAD PU MOULDED CUSHION SEAT SYNCHRO MECHANISM CLASS 4 GASLIFT 100MM ( BIFMA CERTIFIED) TC COVER NYLON BASE (BIFMA STANDARD) NYLON CASTOR ( BIFMA CERTIFIED)

WORKSTATIONS CHAIRS - MARVEL 2 MESH BACK 2D ADJUSTABLE HEAD REST ADJUSTABLE LUMBER SUPPORT ADJUSTABLE ARMREST WITH PU PAD PU MOULDED CUSHION SEAT SYNCHRO MECHANISM CLASS 4 GASLIFT 100MM ( BIFMA CERTIFIED) TC COVER NYLON BASE (BIFMA STANDARD) NYLON CASTOR ( BIFMA CERTIFIED)

MD CABIN AND HOD - GODREZ VC CHAIR - HIGH BACK WITH JUMBO HEAD REST BACK & SEAT FRAME STRUCTURE MADE OF SINGLE PIECE UPHOLSTERED EITH MICROFIBER ALUMINIUM WITH PU PAD FIXED ARMREST TORSION BAR SINGLE LOCK TILT MECHANISM CLASS 2 120MM HYDRAULIC 350MM ALUMINIUM BASE SUPERIOR NYLON CASTOR

AVP/MANAGER CABIN AND CUBICAL VISITORS CHAIR - D 004 VC CHAIR (BLACK) - M edium Back Chair PU Seat and Back Chrome Armrest with PU pad Visitor Chrome Base

CONFERENCE CHAIRS - MARVEL 2 MESH BACK 2D ADJUSTABLE HEAD REST ADJUSTABLE LUMBER SUPPORT ADJUSTABLE ARMREST WITH PU PAD PU MOULDED CUSHION SEAT SYNCHRO MECHANISM CLASS 4 GASLIFT 100MM ( BIFMA CERTIFIED) TC COVER NYLON BASE (BIFMA STANDARD) NYLON CASTOR ( BIFMA CERTIFIED)

CONFERENCE CABIN HEAD CHAIRS - MARVEL 2 MESH BACK 2D ADJUSTABLE HEAD REST ADJUSTABLE LUMBER SUPPORT ADJUSTABLE ARMREST WITH PU PAD PU MOULDED CUSHION SEAT SYNCHRO MECHANISM CLASS 4 GASLIFT 100MM ( BIFMA CERTIFIED) TC COVER NYLON BASE (BIFMA STANDARD) NYLON CASTOR (BIFMA CERTIFIED)

ARM CHAIRS - for MD room and MD Waiting area

INFORMAL CHAIR - Reading room, Resting room & waiting area in Hod room

DINING CHAIRS - for Pantry area

SOFA - 2 seater = 3nos, 3 seater = 4nos

BUNKER BED WITH MATTRESS - FOR Resting Room for Both Floor

Signage's

Entrance Logo : Supply and fixing of HDF / Acrylic / ACP colored to match with appropriate Logo colors. Soft copies of the logo and size will be given by client based on that loga has to be fabricated using CNC cutting machine for logo of 25mm thk & Text height of 300mm and floating effect . Colour & Logo design to be as per Standards.

Reception Logo : Supply and fixing of HDF / Acrylic / ACP colored to match with appropriate Logo colors. Soft copies of the logo and size will be given by client based on that loga has to be fabricated using CNC cutting machine for logo of 25mm thk & Text height of 300mm and floating effect . Colour & Logo design to be as per Standards.

Brushed Stainless Steel Etched Plates with black enamelling for text; plate of dimension 150mm x 50mm with given content; inclusive of fixing adhesives, tapes & accessories as required. (Push, Pull Plates & toilet )

Outdoor Signage Board - MS Frame with ACP, 3M Vinyl Sticker Cutting,Aluminum Trim Cap Emposing Letters with UV Print 3”Pole and Solid L Channel with Painting Fountation. Final Signage Board Size – 20’x4’ ACP Sheet Size - 8’x4’ , Osram LED, Signage Design to be approved by Client / PMC.

Miscellaneous

Art work: Supply & fixing of framed artwork - Digial file from shutter stock to be printed on textured vinyl sheet and mounted on top of sun board. Printed graphic should not less than 720 dpi. Over all thickness to be 25mm . Image links and size of prints will be as per architects instruction. Cost to include Purchase of digital image from shutter stock, mount board, fixing with Suitable adhisive to mount board finally fixing it to partition. Appro. size 1200mm x 800mm. Make 3M or equivalent.

Supply and fixing of wall paper to exisitng surface. Cost to include Surface preperation, leveling, fixing with suitable adhisive and cleaning the site after completion and all necessary scaffolding and tools. Basic rte for wall paper will be 2000 rs / Sq,m

Vinyl Poster: Supply & fixing of framed Vinyl poster - Digial file from client will be issued which needs to be printed on textured vinyl sheet and mounted on top of sun board. Printed graphic shoul not less than 720 dpi. Over all thickness to be 25mm . Image links and size of prints will be issued by client. Cost to include mount board, fixing with Suitable adhisive to mount board finally fixing it to partition. Appro. size 1200mm x 600mm Make 3M or equivalent.

3m frosted film- Supply and fixing of frosted flim over glass partition as per size and approved design. Cost to be inclusive of preparation of design. Basic Cost 1200/SqM

TSCALE CONSTRUCTIONS AND INTERIORS (BID ID -1218391)

Arteriors Build India Pvt Ltd (BID ID -1220550)

INTERMARC (BID ID -1219637)

BSM constructions (BID ID -1218220)

YUDEK ENGINEERING PRIVATE LIMITED (BID ID -1220692)