SPL REPAIRS TO BLDG NO NP-17 AT 9 PARA (SF) UNDER GE (SOUTH) UDHAMPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Glazed coloured ceramic jointfree/rectified tiles 450mm x 300mm x 8 to 10mm on vertical surfaces of walls as in dado/skirting etc., set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed.

Non skid, ceramic coloured tiles 7 to 8mm thick (square/rectangular) size 300x300, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:4,etc. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed.

25 mm thick, cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor for sub base, complete all as specified and as directed

Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed or bedding layer in cement mortar (1:4) rubbing and polishing etc. complete all as specified.

Machine cut kota stone 18-20mm thick as in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10 mm thick rendering as backing coat in cement mortar (1:4) rubbing and polishing etc. complete all as specified and as directed. Note:- Single piece kota stone to be provided in trades & risers of stair case.

Granite (of any type) work 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in c Rounding to edges of stone slabs one edge,such as in steps, cooking platform,and other similar situationsement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade. complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water. complete, all as specified and as directed by Engr-in-Charge.

Rendering 15 mm thick on brick or stone or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing integral water proofing compund in the proportion as mentioned in manufacturer's instructions (water froofing compound to be measured and paid for seprately) complete all as specified and as directed.

Rendering 10mm thick on brick or concrete surfaces in cement mortar 1:6, and finished even and smooth without using extra cement,complete all as specified and as directed.

5mm thick rendering on brick or concrete surfaces as in ceiling in cement mortar 1:3, and finish the surface even and smooth without using extra cement, complete all as specified and as directed.

Supply only Integral water proofing compound, complete all as specified and as directed.

Preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling all as specified.

Preparation old surfaces of white wash and applying two coats of white wash on ceiling complete all as specified and as directed.

Two coats of oil bound distemper including a coat of primer over a layar of 1-2 mm birla white putty including preparation of newly plastered surfaces of wall, complete all as specified & directed.

Preparation old plastered surfaces including complete removal of existing surface and applying two coats of oil bound distemper over a layar of 1-2 mm birla white putty on wall, complete all as specified & directed.

Applying three coats of white wash on newly plaster surfaces of wall over including preparation of surfaces. complete all as specified and directed.

Applying three coats of white wash on newly plaster surfaces of wall over including preparation of surfaces. complete all as specified and directed.

Preparing newly plastered or undecorated surfaces of wall, applying chalk whiting on plastered surface preparatory to walls with two coats of cement base paint white or tinted, complete all as specified and as directed.

Preparing of old plastered surfaces of wall and distempering with one coats of cement base paint white ot tinted complete all as specified and as directed.

Completely removing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed by Engr-in- Charge. Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency/applicator which will further have to rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed.

4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm 605mm including all accessories, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Rolled mild steel in roof trusses (framed) , trussed , purlins,crane gantries , rails and fastening and heavy bracket framing ( beam, tee, angle, channel or flat section) including distance pieces conforming to Fe 410-W, Gde E-250 Quality 'A', complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Description all as per item No. 32 above but area exceeding 1.50 square metre and not exceeding 4 square metre each.

Solid PVC door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheet and edge will be painted to match with prelam sheet. reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified & directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing as per specification & drawing, complete all as specified and as directed.

Pressed steel frames for doors, made out of 1.4 to 1.5 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, complete all as specified and as directed.

Description all as per item No 36 above but frame size 105 x 60 mm.

M&L for factory made, 35 mm thick,2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

30mm thick flush shutters, solid core construction, with block board core and plywood face pannels and both face is covered with decorative face veneer with liping/frame to match, complete all as specified and directed.

35mm thick, factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete, all as specified and directed.

S& F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type c-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast. complete all as specified and as directed.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item No. 43 here in before but without glazing bar complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3. ii) MS fillets, glazing, wire gauge shall be measured and paid for separately.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed.

Welded steel wire fabric mesh weight not exceeding 4 Kgs per sqm fixed to wood or steel members complete all as specified and directed.

Rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410 (E-310-O) complete all as specified and directed.

Cutting holes exceeding 150 sq.cm but nexc 400 sq.cm in to brick walls built in CM 1:3 and making good in cement concrete 1:2:4 type B1 for fixing of cooler brackets etc all as specified and as directed.

Preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete, complete all as specified and as directed.

4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

4 mm thick figured glass (frosted) ,pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and directed.

300 mm long stainless steel, sliding door bolt (ISI Marked) stainless steel and fixed complete all as specified and as directed.

S&F 150mm long, stainless steel, barrel tower bolts and fixed, complete all as specified and directed.

S&F 150 mm stainless steel handles and fixed complete all as specified and directed.

S&F 100 mm stainless steel handles and fixed complete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100 mm long complete all as specified and directed.

Continuous (piano) hinges width of flaps 30 mm when opened, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

18/19 mm thick HDMR board (ISI marked), exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for kitchen cabinet stand board etc including 6mm thick teak wood beading all around, incl dismentling of old existing shutter, complete all as specified and as directed.

Hasp and staple, 100 mm powder coated with hinges pin, including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and as directed.

2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labour, articles not exceeding 200 cubic centimetre each complete all as specified and as directed.

S&F Stainless steel curtain rods, 25mm dia including ball finials, wall to wall etc. complete all as specified and as directed.

Mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified.

M/L Plain cement concrete 1:5:10 type E-2 as in sunken floor/ foundation, filling and mass conc complete all as specified and as directed.

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Reinforced cement concrete M-25 design mix, using 20 mm graded aggregate as in chajjas and like all as specified and as directed.

Use and waste of form work to sides and sofits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc to obtain rough finished flat surface of concrete complete all as specified and as directed.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and including binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.

TMT mild steel bars, 8mm dia and over upto and incl 10mm dia , as in stirupps cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius built in cement mortar 1:6, complete all as specified and as directed.

Description all as per item No 73 above but except brick.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius built in cement mortor 1:4 complete all as specified and as directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted , built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge. Note PCC Bond Stone shall be paid separately under appropriate item and volume of bond stone shall be deducted.

Description all as per description of serial item No 76.00 here in before but except stone.

Pre-cast plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in bond stones and in similar works set in cement mortar 1:6, including necessary form works, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20 mm to face stone Granite or trap stone) and dressing of face beds and stone and joint as specified of rendom , rubble walling, uncoursed or brought upto courses. complete all as specified and as directed.

M&L flush pointing to random or polygonal rubble Masonry, uncoursed or brought upto courses, in cement mortar 1:4 complete all as specified and as directed.

Plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles and throating and necessary form works, all as specified and directed.

Viterous china wash basin, under counter round shape white size 395 x 395 x 130mm incl waste couping CP 32mm dia PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed.

Vitreous China urinals, half stall (back or corner wall type) white, but including PVC waist pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), fixed in repairs, complete all as specified and directed.

10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, fixed in repairs, complete all as specified and as directed.

Vitreous China wash down water closet pan and seat cover (pedestal pattern), coloured (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed.

Vitreous china water closet, 'Orissa pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and as directed.

Plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair Hand (health faucet) of length 1.2 m completed all as specified and as directed.

S&F in repairs flush pipe of polyethylene of low or high density, 32 mm dia, for low level cistern,including taking down old pipe, complete all as specified and as directed

S&F SS tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. complete all as specified.

Rotational moulded polyethylene water storage tank , triple layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks, complete all as specified and as directed.

S&F in repair 15 mm bore Bib taps, fancy type , cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm fixing in repair, complete all as specified and as directed.

S&F in repair fancy type, chromium plated, stop value cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plate of size 15mm ,with long shank and cup (concealed type)all as specified.

S&F SS grating 100mm dia fixed to floor trap in repair.

S&F angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, fixed in repairs, complete all as specified and as directed.

Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm fixing in repair.

Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm fixing in repair.

Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed.

CP mixture wall 15 mm bore for mixing hot & cold water screw down for iron pipe, fixing in repair complete all as specified.

S&F in repairs fancy type Pressmating Pillar cast copper alloy with high pressure, with or without lettered 'Hot' or 'Cold' screwed for iron pipe of bore 15 mm, complete all as specified and as directed.

S&F in repair CP Soap dish, any type, fixed to plugs with chromium plated brass screws.

Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.

S&F in repairs for Shower roses 15 mm chromium plated, with CP arm 125mm dia with or without swivel joint, with complete all as specified and directed.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified.

Taking up or down steel tubing of 15 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed.

Taking up or down steel tubing of 20 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed.

15mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

20mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipe/PVC pipe 100mm dia and below jointed in cement mortar and taking out of floor/walls etc complete all as specified.

S&F for PVC (SWR) 75mm floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.

110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, with 6Kg/CM² pressure rating, fixed to walls, complete all as specified and as directed.

75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, with 6Kg/CM² pressure rating, fixed to walls, complete all as specified and as directed

110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, with 6Kg/CM² pressure rating, fixed to walls or as in weep hole, complete all as specified and as directed.

75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, with 6Kg/CM² pressure rating, fixed to walls, complete all as specified and as directed.

75 mm bore PVC SWR bends and fixed with joint sealent etc complete all specified and as Directed.

110 mm bore PVC (SWR) junction Y or T single equal or unequal with access door etc complete all as specified and as directed.

75mm PVC cowls as in repairs complete all as specified and as directed.

S&F Reducer 100mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes/soil pipes (any size, type or pattern), including all fitting incl removal of store and sold to contractor through credit, complete all as specified and as directed.

110mm bore PVC SWR bends and fixed with solvent etc complete all specified and as directed.

110mm bore, PVC (SWR) pipes, single or double socketed, in any length with rubber ring joints, pressure rating 4kg/cm2 fixed to wall incl clamp etc, complete all as specified and as directed.

Stack clamps made out of 50 x 5 mm flat iron and 6 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore pipe, complete all as specified and as directed.

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.

Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

75mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate finishing cement concrete surface even & smooth by using extra cement , complete all as specified and as directed.

Machine pressed / vibro mechenically floated interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement mix with pigment. laid over and including 25 - 30mm thick sand cushioning bed including spreading levelling watering if required, complete all as specified and as directed. Shape shall be approved by Engr-in-Charge.

Providing, cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in coping/ benching, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, and for laying of cable or pipes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.

Plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete complete all as specified and as directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in benching, haunching of manholes, in surface channels and drains, complete, complete all as specified and as directed.

Demolition and breaking up drain pipes, 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed.

150mm bore reinforced concrete pipes, class NP3 with collars laid in trenches and jointed, complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes complete all as specified and as directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and as directed.

Pre-cast RCC cement concrete 1:2:4 type B-I (20mm graded) as in manhole cover slab and in similar works bedded and jointed in cement morter 1:4, complete all as specified and as directed.

Providing, Plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) in roof kerbs or mud stops, in lintel upto 1.5m span rounded or chamfered on edges, complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in surface channels and drains, complete all as specified and as directed.

Taking down carefully copper /aluminium, point wiring (light, fan, socket or power) complete including fittings and fixtures such as light fittings, switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of wall, ceiling, floors etc to match the existing, complete all as specified and as directed.

Point wiring for one light/ fan/bell/Exhaust point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unsheathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.4mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No. 142 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per srl item No. 142 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per Srl item No 142 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed.

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed.

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed.

BLANK

S&F in replacement VTPN MCCB DB Double Door (Including 100 Amp MCCB) 16 kA(as Incommer) 4 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Sheet metal enclosures for distribution board when MCB to be used SPN 8 way with IP-43, IK-09 protection 240V with approximate size bus bar, double door type including cutting chases in walls for fixing DBs making good the distubed surfaces to match with existing specifications, fixed in repairs, complete all as specified and as directed.

Sheet metal enclosures for distribution board when MCB to be used SPN 12 way with IP-43, IK-09 protection 240V with approximate size bus bar, double door type including cutting chases in walls for fixing DBs making good the distubed surfaces to match with existing specifications, fixed in repairs, complete all as specified and as directed.

MCB SPN, 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, complete all as specified and as directed.

MCB SP, 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, fixed in repairs, complete all as specified and as directed.

Sub main wiring with two runs of 10 Sqmm ( 2x10 sqmm ) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS-694 drawn through and including non-metalic PVC rigid concealed conduit 25 mm dia medium grade (ISI marked) with all conduit accessories mounting on suface of walls /roofs / ceiling etc with one run of 10 Sqmm (1x10sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, complete all as specified and directed. Note:- 2 runs of 10 Sqmm (2x10sqmm ) ,one run of 10 Sqmm (1x10 sqmm ) cable and one metre of conduit will be measured as one unit.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified.

Srl item No 158 Contd … (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.

Modular electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed.

Supply and fix Exhaust fan, steel body AC single phase 230/240 V of size 300mm sweep with louver speed 900-950 RPM power input 50-55 W, Heavy duty, complete all as specified and as directed.

Supply and fix ceiling fans, complete with blades, down rods, and accessories 230V, 1200mm sweep, Main air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC), complete all as specified and as directed. Make:- Bajaj/Khaitan/Atomberg/Orient. Note:- Unserviceable items deposited in MES store in BER procedure.

Taking down Ceiling fans, cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge.Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

Taking down & refixing of LED light fitting any type/ any wattage connected with copper conductor cable suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1x 20W, 230V, white/ warm wall mounted LED batten with powdered coated aluminium housing & integrated electronic driver with THD<10%, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F LED lights fitting 1x 10W, 230V, white/ warm wall mounted LED batten with powdered coated aluminium housing & integrated electronic driver with THD<10%, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply, laying and testing of XLPE insulated sheathed armored heavy duty LT 1100 Volts grade cable with aluminum conductors laid in trenches/pipe, fixed to poles, walls of size 25 sqmm 4 core including taking up/down old unserviceable cables. complete all as specified and as directed.

Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified.

GI tubing light grade 40mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles, complete all as specified and as directed.

Supply and fix electric water heater, vertical storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and as directed.

TULSI RAINA AND SONS (BID ID -3393334)

paras ram pachiala (BID ID -3391849)

ASHOK KUMAR PURI (BID ID -3392275)

d d builders (BID ID -3394070)

RAMAN CONSTRUCTION CO (BID ID -3393269)

M/S Inderjit Sharma and Co. (BID ID -3393695)