Special Repair of SHC Bhakli and Surehli, CHC Nahar and Civil Hospital at Kosli in Rewari Distt.(Re-Invite)

Amount

Surface dressing of the ground including removing vegetation and ineqaualities not exceeding 15 cm deep and disposal of rubbish lead upto 50 cm and upto 1.5cm (HSR 6.25)

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement (HSR 8.5 b)

Dismantling Concrete (a) lime concrete, cement concrete of 1:6:12 or leaner mix (HSR 8.6 (a +d ))

Dismatnling Roofing (a) first class mud roofing (HSR 8.8 (a))

Removing doors and windows (wooden and steel) together with the dismantling of walls (HSR 8.17) (a) Door

Window

Scraping (a) white wash and colour wash (HSR 8.32 a)

Scraping (c) cement plaster (HSR 8.32 (c))

Removal of old broken glass panes (any thickness or size, quality or description) from metal frames including punching or drilling out old glazing pins/clips (8.33 (b))

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

Precast cement concrete 1:1½:3 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey. (HSR 10.77 + 10.95 (a))

Providing and laying 60mm thic interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 25mm thick etc. (HSR 10.158)

Providing and laying 80mm thic interlocking paver blocks of all shapes and colours in design mix cement M-40 over a bed of 30mm thick etc. (HSR 10.159)

First class brick laid in cement sand mortar 1:4 in foundation and plinth (HSR 11.4)

First class brick laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level. (HSR 11.9)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc (HSR 13.13)

Base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. (HSR 14.1)

Conglomerate floor 50 mm thick cement concrete topping 1:2:4 (HSR 14.10)

Providing & fixing vitrified tiles of size 600 x 600mm of approved made in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tiles shall be of premium quality (first quality) of reputed manufacturer like SIMPOLO, ORIENTBELL, NITCO, KAJARIA, & RAK. (NS) (Note: double charged tiles shall be used)

Providing and fixing 1st quality ceramic-glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer -In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. [HSR 14.92 (b)]

12 mm thick cement plaster 1:4 (HSR 15.5)

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10)

6 mm thick cement plaster 1:3 with floating coat of neat cement 1:5 mm thick and one coat of white washing on bearing of R.C.C. slab. (HSR 15.83)

Cement rendering on plaster 1 mm thick (HSR 15.75)

Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc. (HSR 16.2)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Painting one coat with ready mixed paint for metallic surfaces in all shades on old steel or iron work. (HSR 16.11)

Painting one coat with plastic emulsion paint on walls on old work to give an even shade. (HSR 16.31)

White Washing one coat or subsequent coat (HSR 16.46)

White Washing Three coats (HSR 16.48)

Preparation of plastered surface for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk miti including finishing the surface to the required finish complete (HSR 16.52)

Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on new work, two coats to give an even shade (HSR 16.61)

Providing two coats of exterior acrylic emulsion paint. (b) 1st quality (HSR 16.79)

Supplying and fixing glass panes with deodar wood moulding (c) 4 mm thick (glazing area above 55 sq dm, but upto 84 sq dm of each pane) (HSR 17.24 (c))

Teak wood door and window shutters, paneled, glazed, or glazed and paneled, including iron hinges, screws, chocks/cleats and stops etc., complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same). (HSR 17.37)(a) 35 mm thick (12 mm thick teak wood panel)

30 mm thick (12 mm thick teak wood panel)

Teak would wire gauze door and window shutters without springs housed in chowkats including chocks/ cleats, iron hinges and screws, etc. complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same). (HSR 17.38) (a) 30 mm thick (Door)

25 mm thick (Window)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - (b) door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate (HSR 18.34 (b))

Scarifying stone metal, 50 mm to 100 mm thick, by road roller along with tarred/bituminous crust including picking up scarified material, screening and stacking old useful metal and bajri. (HSR 24.15)

CONSTRUCTION BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 BENCHING 12mm THICK CEMENT PLASTER 1:2 with a floating coat of 1mm thick of neat cement R.C.C.1:2:4 SLAB 100mm THICK /C.C.TOPPING 50 mm THICK WITH 455 MMx455MM/455MMx610MM INSIDE LIGHT DUTY C.I.INSPECTION CHAMBER COVER AND FRAME weight as per I.S.I. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design. (b) Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) (HSR 29.84 (b))

Providing and laying granular sub base consisting of filter layer confirming to Table 400.1 Grading - III & IV of MoRT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No. 401 of MoRT&H specifications (NS)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of- (i) VITREOUS CHINA WARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One Piece SEAT AND LIDIN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers,(to the approval of the Engineer-in-charge). COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (a) Single trap syphonic W.C. Suite (ii) Single colour (HSR 30.5 (a) (ii))

PROVIDING AND FIXING POSITION BEST INDIAN MAKE FLAT BACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH CONSISTING OF : - (i) Flat back lipped or angular urinal basin of VITREOUS CHINA WARE (to the approval of the Engineer-in-charge). (ii) 5 LITRES CAPACITY mosquito proof INDIAN MAKE C.I.AUTOMATIC FLUSHING CISTERN, PAINTED WITH non-yellowing white enamel paint or other approved shade enamel paint on outside and superior black bitumastic paint on inside complete with screwed 15 mm pipe; (iii) PAIR OF R.S.PR C,I. PAINTED BRACKETS AND BRASS COUPLINGS; (iv) Standard size G.I.FLUSH PIPE WITH C.P.BRASS WALL CLIPS AND UNIONS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOOR AND PAINTING OF FITTINGS ETC. (as required by the Engineer-in-charge). (iv) White (HSR 30.19 (iv))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF TWO URINALS LARGE FLAT BACK OR ANGULAR LIPPED FRONT 610MM HIGH IN VITREOUS CHINAWARE WITH 5 LITRES CAPACITY BEST INDIAN MAKE C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE ETC.COMPLETE as fully described in item no.30.25 above. (ii) Single Colour (HSR 30.26 (ii))

EXTRA FOR PROVIDING AND FIXING VITREOUS automatic flushing CISTERN INCLUDING FITTINGS and brackets instead of C.I. flushing cistern COMPLETE. (b) 10 Litres capacity cistern (i) White (HSR 30.37 (b) (i))

Providing and fixing 25mm thick marble partition for different type of urinals (b) VITREOUS CHINAWARE PARTITION PLATE (II) LARGE SIZE 835mm X 355mm (i) White (HSR 30.40 (b) (ii) (i))

Providing and fixing in position best Indian make lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fitting as fully described in item No. 30.41 above. White (iii) Size 610mm x 510 mm with one no. tap (HSR 30.42)

Providing and fixing in position best Indian make lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fitting as fully described in item No. 30.41 above. Single Colour (iv) Size 630mm x 450mm with one no. tap. (HSR 30.42 (iv))

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STELL SINKS WITH COMPLETE FITTINGS. AS FULLY DESCRIBED IN ITEM NO.30.51 ABOVE. a) 600mm X 450mm X 200mm (HSR 30.53 (a))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D IN-LET. (a) VITREOUS CHINA WARE ROSE SHOWERS White colour (i) 175 mm diameter (HSR 30.66 (a) (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) 25 MM DIA C.P.BRASS ADJUSTABLE 750 mm long (HSR 30.68 (a))

(b) 20 MM DIA C.P.BRASS ADJUSTABLE 600 mm long

(e) C.P. brass towel ring

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc. (a) C.P.BRASS (i) Soap dish large (HSR 30.70 (a) (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) INDIAN MAKE (i) 600mm X 450mm (HSR 30.71 (a) (i))

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). (a) Bib cock long body (HSR 30.75 (a))

PROVIDING AND FIXING IN POSITION AUTOMATIC BRASS BALL VALVES IN TANKS. (a) WITH COPPER BALL (vi) 50 mm internal diameter (HSR 30.110 (a) (vi))

Providing and fixing in position best Indian make vitreous chinaware channel of size 600mm x 150mm including laying and fixing in cement concrete 1:2:4 complete as required by the Engineer-in-charge. (i) White (HSR 30.115)

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing over flow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks completein all respects to the satisfaction of Engineer-In-Charge. (Except civil work).(HSR 30.119) 1000 Ltr capacity

Parking Shed Scarifying stone metal, 50 mm to 100 mm thick, by pick-axes, along with the tarred/bituminous crust including picking up scarified material, screening and stacking old useful metal and bajri.(HSR 24.14)

Earth work in excavation in foundations, trenches, etc.in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres (HSR 6.6)

Cement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth. (HSR 10.28)

Cement Concrete 1: 1 ½: 3 with stone aggregate 20mm nominal size in foundation and plinth. (HSR 10.42)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in payments, roads, taxitracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. (HSR 10.132)

Structural steel work in angles, tees and flats, welded including cutting fixing all gusset plates, bolts, nuts, welding rod, etc., with hoisting and erecting in position:- (HSR 18.7)

Providing and fixing polycarbonate sheeet-roofing i/c cost of sheet, screws etc. N.S.

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work. (HSR 16.17)

Recovery items: - Bidders have to quote rated for recovery items atleast or more than reserve price. The rates qutoed against recovery items will not be included in the total amount. Rather rate will be deducted while calculating financial statement of the agency. Note:- The reserve amount if minimumu amount to be used as base for qutoing purchase rate by the agency. No rates below the reserve price will be entertained and reserve rise will be considered for all purposes in the case the agency qutoes lesser Brick Bats @ 400 /- Per Cum

Brick Tiles @ 5/- Each

Door Shutter @ 200 /- Each

Wire Shutter @ 100 /- Each

Window Shutter @ 100 /- Each Note:- In Case of any discrepancy in nomenclature / unit of items of BOQ depicted in the DNIT, the nomenclature / unit of MoRT&H (5th Revision) / HSR shall be applicable.