Providing Following Materials For Work Repair Z P Primary School Building At Chandgaon

Amount

Providing Following Materials For Work Repair Z P Primary School Building At Chandgaon Tal Shrigonda Dist Ahilyanagar

Item No 1 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. As directed by Engineer in

Item No.2 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. As directed by Engineer in charge.

Item No 3 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete As directed by Engineer in charge.

Item No.4 - Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Item No.5 - Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Item No.6:- Providing and laying in situ cement concrete M -20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, with Concrete concrete mixer . With natural sand.A) M-20 Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38( Rate Analysis )

Item No.7:- Providing and casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with Concrete concrete mixer. With natural sand.A) M-20 Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 ( Rate Analysis )

Item No.8:- Providing & casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). with Concrete concrete mixer With natural sand. A) M-20 Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 ( Rate Analysis )

Item No.09:- Providing and fixing in position TMT FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( steel from other plant ) Spec. No. : Bd.F.17 Page 306 ( Rate Analysis )

Item No.11:-Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.Number: As directed by Engineer- in-charge.

Item No.6 - Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Item No.7 - Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Item No.8 - Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Item No. 9 :- Providing brick masonry in cement mortar1:4 using second class bricks in half brick thk. Wall including mild steel longitudinal reinforcement of two bar of 6mm diameter / 2 hoop iron strips 25mm x 1.6mm at every third course,properly bent & bounded at ends ,scaffolding, racking outJoints & watering complete. Spec.No.Bd. G.7,Page No 316. ( Rate Analysis )

Item No.10 - Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete..

Item No. 12 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Item No.13 -Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Item No.14 - Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.) 38.04 Bd.R.5, Page One Number 453

Item No.15 - water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Item No. 16 :- Providing and fixing in position Aluminium louvered windows / ventilators of various sizes with powder coating as per detailed drawings and specifications including aluminium frames 80 x 38 mm box type, 5 mm thick sheet glass louvers, clips / rubber plain P.V.C. gaskets of approved quality etc. complete. (Sample to be got approved from Exe. Engineer before use) Spec. No. As directed by Engineer in charge.( Rate analysis )

Item No. 17 - Providing and fixing M.S. grill door 24 Kilogram/ Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc

Item No.18 - Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Item No.19 - Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete.

Item No.20:- Providing and fixing antiskid ceramic tiles of approved quality 30 cm x 30 cm x 7 mm for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing complete. Additional Item Spec.No. : As directed by Engineer in charge. ( Rate analysis )

Item No.21:- Providing and laying ceramic tiles of approved quality and size of 30 x 45cm, 7 mm thick for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry, cleaning, curing complete. Additional Item Spec. No. : As directed by Engineer in charge. ( Rate analysis )

Item No.22 - Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Item No.23 - Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.

Item No.24:- Providing and fixing First class white glazed earthenware “ORISSA TYPE “ Water Closet Pan including P / S trap UPVC soil & vent pipes upto the outside face of the wall, 1:2 lime concrete/1:5:10 C.C. bedding, with mosquito proof coupling, chain and pull, painting of the cistern and exposed pipes and cutting and making good walls and floors complete. Spec.No. :As directed . a) ---do--- with out flushing cistern with flush cock. & necessary fittings. ( Rate analysis )

Item No.25:- Providing and fixing white glazed earthenware Wash Hand Basin of Size 55 x 40 cm. including pillar tap, brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including UPVC waste pipe and without bottle trap, upto the outside face of the wall making good damaged surface, testing etc. complete. Spec. No. : Bd.V.30 Page No. 565.( Rate analysis )

Item No.26:- Providing and fixing 10cm P.V.C. long arm Nahani Trap including C.I. grating, bend and piece of C.I. pipes upto the outside face of the walls etc. complete. Spec. No. : Bd.V.32 Page No. 567 and as directed by Engineer in charge). ( Rate analysis )

A) 110mm UPVC pipe

Item No.28 :- Providing & constructing soak pit of specied size as per detailed drawing including excavation , hollow brick masonry , filling with brick bats etc. complete.Spec. No. : Bd. V.46 Page No. 576. ( Rate analysis )

A) 15mm dia. G.I.Pipe

B) 25mm dia. G.I. Pipe

Item No. 30- Providing & fixing 15 mm dia. screw down bib / stop tap of brass including necessary socket union nut , testing etc. complete. (Prior approval of sample & brand by Executive Engineer is necessary before use) Spec No. : Bd. V. 8 Page No. 554( Rate analysis )

Item No.31:- Providing and fixing -75mm- diameter UPVC soil / vent / waste SWR pipe of required diameter conforming to IS-13592:1992, and IS-4985:2000 to withstand continuous internal hydraulic pressure of 4 kg / cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No.: As directed by Engineer-in-charge. ( Rate Analysis )

Item No.32:- Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. Additional Item. Spec. No. As directed by Engineer in charge.( Rate analysis )

Item No.33 :- Providing, hoisting and fixing in position sintex or equivalent high density polyethylene UV stabilized confirming to IS –12701 ;water storage tank with necessary connection ,testing etc. complete. Specification No. As directed by Engineer in charge ( Rate analysis )

Item No.34 :- Providing and fixing 25 mm screw down wheeled stop tap of brass including necessary sockets / union nut, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.) Spec. No. : Bd.V.9 Page No. 555 ( Rate analysis )

Item No.36 - Testing Charges of sand

Item No.37 - Testing Charges of bricks

Shrigonda Majur Sahakari Sanstha LTD (BID ID -7044581)

SAJ MAJUR SAHAKARI SANSTHA LTD. AHMEDNAGAR (BID ID -7044553)