Block A Regarding retrofitting of School of District Chamba GSSs lylh .

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of Nominal concrete 1:3:6 or richer mix (i/c equivalent design m ix material within all leadas per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within all lead as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and up to floor two level.as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

CEMENT PLASTER (IN COARSE SAND) 20 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqm12 mm average thickness. as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications as per direction of Engineer - in - charge.Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honeycomb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-inCharge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Electrical fitting charges(4000/-per room) as per the directions of the Engineer-in-Charge The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Bikram Singh Thakur (BID ID -500748)

Kamlesh Kumar (BID ID -500157)