Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 CrAccepted-AOC AVANTIKA COLONY NEAR RICE MILL AMROHA | AMROHA | AMROHA | UTTAR PRADESH | ₹2.0 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹2.0 Cr+₹3.0 L (1.50%)Rejected-Finance CHIRA GHORAWAL SONBHADRA | SONBHADRA | UTTAR PRADESH | 231205 | ₹2.0 Cr+₹3.0 L (1.50%) | L2 | Rejected-Finance L2 |
| 3 | L3₹2.1 Cr+₹10.6 L (5.38%)Rejected-Finance A 8 MISSION COMPOUND SADAR BAZAR DISTRICT SAHARANPUR UTTAR PRADESH | SAHARANPUR | SAHARANPUR | UTTAR PRADESH | ₹2.1 Cr+₹10.6 L (5.38%) | L3 | Rejected-Finance L3 |
| 4 | Not Admitted-Fee/PreQual/Technical UTTAR PRADESH UP | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | GANPATI CONSTRUCTIONS L3 | M/S RIDAM ASSOCIATES L1 | ASHOK KUMAR L2 |
|---|---|---|---|---|---|---|
| 1.00 | Construction of RCC railing in C.C 1:1.5:3 (Cement: Coarse sand :Coarse Aggregate ) in-situ with 20 mm nominal size aggregate, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete including cost of all material, carriage, labour and T&P etc. required for proper completion of work | 112 | Rm | 1,879.87 ₹2,10,545.44 | 1,800 ₹2,01,600 | 1,559 ₹1,74,608 Lowest |
| 2.00 | Providing and fixing Railling Mesh on sides of existing railing of bridge including Cost of M.S. angle size 65x65x5 mm and 50x50x5 mm, M.S.flat 40x5mm, welded wire mesh of 4mmǾ dia wire of square size 50x30 mm, fabrication at workshop, cost of erection at site in proper alignment with two coat painting by synthetic enamel paint over primer coat as per drawing also including cost of all material, carriage, labour and T&P etc. required for proper completion of work | 96 | Sqm | 8,380.44 ₹8,04,522.24 | 8,400 ₹8,06,400 | 8,087 ₹7,76,352 Lowest |
| 3.00 | Providing and fixing of Railling Mesh on sides of bridge/Wing Walls including Cost of M.S. angle size 65x65x5 mm and 50x50x5 mm, M.S.flat 40x5mm ,welded wire mesh of 4mmǾ dia wire of square size 50x30 mm, fabrication at workshop,cost of erection at site in proper alignment with two coat painting by synthetic enamel paint over primer coat also, grouting in C.C.1:2:4 (Cement:Coarse sand: coarse aggregate) as per drawing also including cost of all material, carriage, labour and T&P etc. required for proper completion of work | 1,678 | Sqm | 6,462.1 ₹1,08,43,403.8 | 6,500 ₹1,09,07,000 | 6,235 ₹1,04,62,330 Lowest |
| 4.00 | Providing & Fixing Safety Guard for Railling Jali by channel 150mmx75mm with fabrication and fixing in C.C. 1:2:4 (Cement:Coarse sand :Coarse Aggregate ) including cost of all material, carriage, labour and T&P etc. required for proper completion of work. | 100 | Nos | 4,997.62 ₹4,99,762 | 5,000 ₹5,00,000 | 4,822 ₹4,82,200 Lowest |
| 5.00 | Reparing of damaged railing by fabrication M.S. channel 75x40 x6mm, M.S Flate 50x 6 mm, etc. at site in proper alignment, after one coat readymix primer including cost of all material, labour and T&P after deducting the cost of old damaged material. etc .required for proper completion of work | 5,810 | Kg | 121.27 ₹7,04,578.7 | 125 ₹7,26,250 | 117 ₹6,79,770 Lowest |
| 6.00 | Painting over existing M.S. Railing by applying 2 coat of enemal paint including cost of material, carriage, labour, T&P etc required for proper completion of work | 607 | Sqm | 87.7 ₹53,233.9 | 85 ₹51,595 | 84.5 ₹51,291.5 Lowest |
| 7.00 | Road Delineator Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal-proof. including all cost of material labour & T&P etc required for proper completion of work. | 110 | No. | 1,209.68 ₹1,33,064.8 | 900 ₹99,000 Lowest | 1,167.5 ₹1,28,425 |
| 8.00 | Solar Road Studs:Providing and fixing Solar Powered Road Studs (Rectangular) of size not less than 100mm x 100 mm x 10 mm or (Circular) of dia 130+/- 6mm and height 30 +/- 2mm (with 8 super bright LEDs for long visibility from distance greater than 800 m) having twin shank and body made of aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13635 kg tested in accordance with ASTM D 4280 and water resistance as per IP 65 in accordance with IS 12063:1987, fixed to the road surface using adhesives and the procedure recommended by the manufacturer including all cost of material, carriage, labour & T&P etc required for proper completion of work | 160 | No. | 2,074.03 ₹3,31,844.8 | 1,800 ₹2,88,000 Lowest | 2,001 ₹3,20,160 |
| 9.00 | Engaging labour for site clearance and opening the outlets for disposal of drain water | 175 | man day | 362.02 ₹63,353.5 | 500 ₹87,500 | 349 ₹61,075 Lowest |
| 10.00 | Retro reflective Type XI DG3 HIP Sheeting pasted on 4 mm thick ACP/ACM including all 60 cm circular supported on railing jali including all cost of material, carriage, labour & T&P etc required for proper completion of work | 30 | No. | 2,945.65 ₹88,369.5 | 2,800 ₹84,000 Lowest | 2,841 ₹85,230 |
Tender Value
₹2.2 Cr
EMD Value
₹4.4 L
Closing Date
22 Sept 2025, 2:00 pmClosed
SE GNSM Meerut
Office of SE GNSM Meerut
As per the NIT
2025_UPIDC_1069427_5
03/SE/2025-26
Open Tender
Civil Works
Piece-work
180 days
Haridwar
Please refer Tender documents.
2 documents required · 2 mandatory
₹4,130
₹4.4 L
Office of SE GNSM Meerut
27 Oct 2025
29 Aug 2025
22 Sept 2025
29 Aug 2025
22 Sept 2025
29 Aug 2025
3 Sept 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .