GEMC-511687746660360
Awarded to M/S SHIVA SCIENTIFIC ENTERPRISES
₹41.5 L
Products
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| Blow lamp 500ml brass | Standard | 9023 | 1 Nos | 3,291 | 3,291 |
| File round 200 mm 2nd cut | Python | 9023 | 4 Nos | 400 | 1,600 |
| Cables | Standard | 9023 | 1 Each | 9,637 | 9,637 |
| Universal Motor with starter switch | ANSHUMAN | 9023 | 1 Nos | 209,905 | 209,905 |
| Try Square 150 mm blade | Bharat | 9023 | 4 Nos | 438 | 1,752 |
| Hydrometer | ANSHUMAN / Standard | 9023 | 2 Nos | 881 | 1,762 |
| Immersion Heater | Standard | 9023 | 1 Nos | 1,234 | 1,234 |
| Ohm Meter | ME | 9023 | 2 Nos | 4,936 | 9,872 |
| Steel Tape 5M | Freeman | 9023 | 21 Nos | 165 | 3,465 |
| File flat 150 mm rough | Python | 9023 | 4 Nos | 254 | 1,016 |
| Bus bar with brackets | Standard | 9023 | 3 Nos | 6,464 | 19,392 |
| Synchronous motor | ANSHUMAN | 9023 | 1 Nos | 306,719 | 306,719 |
| Chisel Cold 25 mm X 200 mm | Taparia | 9023 | 2 Nos | 291 | 582 |
| Hand Drill Machine | Agni | 9023 | 2 Nos | 3,056 | 6,112 |
| AC Ceiling Fan and AC Table Fan | Standard | 9023 | 1 Nos | 7,052 | 7,052 |
| Ohm Meter | ME | 9023 | 2 Nos | 4,936 | 9,872 |
| Plier Insulated, 200 mm | DeNeers | 9023 | 21 Nos | 282 | 5,922 |
| Outside Calliper 150mm spring type | Standard | 9023 | 2 Nos | 113 | 226 |
| Rubber mat | Standard | 9023 | 2 Nos | 881 | 1,762 |
| Thyristor IGBT controlled DC motor drive | ANSHUMAN | 9023 | 1 Nos | 168,876 | 168,876 |
| Firmer Chisel 6 mm x 200 mm | Standard | 9023 | 2 Nos | 223 | 446 |
| File flat 250 mm bastard | Python | 9023 | 4 Nos | 263 | 1,052 |
| Geyser | Standard | 9023 | 1 Nos | 8,815 | 8,815 |
| Digital Multi Meter | EEE-TECH / EEETech | 9023 | 12 Set | 1,422 | 17,064 |
| Screw driver insulated | Taparia | 9023 | 21 Nos | 106 | 2,226 |
| Inside Calliper | Standard | 9023 | 2 Nos | 113 | 226 |
| Portable Electric Drill Machine | Agni | 9023 | 1 Nos | 3,056 | 3,056 |
| Thyristor or IGBT controlled AC motor drive | ANSHUMAN | 9023 | 1 Nos | 233,822 | 233,822 |
| Allen Key set | Blto | 9023 | 1 Set | 282 | 282 |
| File flat 250 mm smooth | Python | 9023 | 4 Nos | 497 | 1,988 |
| Electrician Helmet | KARAM | 9023 | 2 Nos | 411 | 822 |
| AC Voltmeter | ME | 9023 | 3 Nos | 3,350 | 10,050 |
| Screw Driver insulated | Taparia | 9023 | 21 Nos | 116 | 2,436 |
| Divider | Standard | 9023 | 2 Nos | 113 | 226 |
| Laboratory Type Induction Coil | Standard | 9023 | 2 Nos | 2,586 | 5,172 |
| Mixture and Grinder | Standard | 9023 | 1 Nos | 5,289 | 5,289 |
| Grease Gun - 0.5 ltr. Capacity | Datsun | 9023 | 1 Nos | 586 | 586 |
| File Rasp | Python | 9023 | 4 Nos | 566 | 2,264 |
| Safety Belt | Standard | 9023 | 2 Nos | 1,469 | 2,938 |
| Single phase Transformer core type | ME | 9023 | 1 Nos | 14,809 | 14,809 |
| Electrician screw drive | Taparia | 9023 | 21 Nos | 96 | 2,016 |
| Pliers long nose round insulated 140 MM | DeNeers | 9023 | 4 Nos | 282 | 1,128 |
| Out Side Micrometer | Mitutoyo | 9023 | 2 Nos | 4,936 | 9,872 |
| Washing Machine | Standard | 9023 | 1 Nos | 15,866 | 15,866 |
| Ammeter MC Analog | ME | 9023 | 2 Nos | 3,350 | 6,700 |
| Bradawl | Standard | 9023 | 2 Nos | 646 | 1,292 |
| Soldering iron 25 Watts | Soldron | 9023 | 2 Nos | 529 | 1,058 |
| AC Energy Meter Single Phase | Standard | 9023 | 2 Nos | 1,410 | 2,820 |
| Three phase transformer shell type oil cooled | ME | 9023 | 1 Nos | 52,300 | 52,300 |
| Heavy Duty Screw Driver | Taparia | 9023 | 21 Nos | 123 | 2,583 |
| Pliers flat nose 200 MM | DeNeers | 9023 | 4 Nos | 259 | 1,036 |
| Thermometer | Hicks | 9023 | 1 Nos | 411 | 411 |
| Motor Pump set | Standard | 9023 | 1 Nos | 8,815 | 8,815 |
| Ammeter MC Analog | ME | 9023 | 2 Nos | 3,350 | 6,700 |
| Pully Puller with 3 legs - 150 MM | Smith | 9023 | 1 Nos | 1,013 | 1,013 |
| Desoldering heat pump | Soldron | 9023 | 4 Nos | 1,117 | 4,468 |
| AC Energy Meter Three Phase | Standard | 9023 | 2 Nos | 2,116 | 4,232 |
| Electrical Machine Trainer | ANSHUMAN / EMT | 9023 | 1 Nos | 496,744 | 496,744 |
| Electrician Screw Driver | Taparia | 9023 | 21 Nos | 123 | 2,583 |
| Pliers round nose 125 MM | Taparia | 9023 | 4 Nos | 306 | 1,224 |
| Series Test Lamp | Standard | 9023 | 4 Nos | 646 | 2,584 |
| Oil Testing Kit | Suvidhi | 9023 | 1 Nos | 65,933 | 65,933 |
| Ammeter MC Analog | ME | 9023 | 2 Nos | 3,467 | 6,934 |
| Pully Puller with 3 legs - 300 MM | Smith | 9023 | 1 Nos | 2,221 | 2,221 |
| Hand Vice 50 mm jaw | Smith | 9023 | 4 Nos | 299 | 1,196 |
| Magnetic Flux Meter | Standard | 9023 | 2 Nos | 18,217 | 36,434 |
| AC Series type Motor with mechanical load | ANSHUMAN | 9023 | 1 Nos | 207,531 | 207,531 |
| Punch Centre | Bharat | 9023 | 21 Nos | 85 | 1,785 |
| Tweezers 150 mm | Standard | 9023 | 4 Nos | 176 | 704 |
| Miniature Breaker | Standard | 9023 | 2 Nos | 1,469 | 2,938 |
| Inverter with Battery | Microtek | 9023 | 1 Nos | 29,382 | 29,382 |
| Ammeter MC Analog | ME | 9023 | 2 Nos | 3,467 | 6,934 |
| Bearing Puller | Smith | 9023 | 1 Nos | 1,169 | 1,169 |
| Table Vice 100 mm jaw | GTI | 9023 | 8 Nos | 3,232 | 25,856 |
| Lux meter | Metravi | 9023 | 2 Nos | 4,113 | 8,226 |
| Single Phase Capacitor Motor with starter switch | ANSHUMAN | 9023 | 1 Nos | 280,257 | 280,257 |
| Knife Electrician | Standard | 9023 | 21 Nos | 106 | 2,226 |
| Snip Straight 250 mm Tin cutter | Smith | 9023 | 2 Nos | 310 | 620 |
| Earth Plate 2mm Copper | Standard | 9023 | 1 Nos | 23,976 | 23,976 |
| Voltage Stabilizer | Standard | 9023 | 1 Nos | 4,701 | 4,701 |
| AC Ammeter MI | ME | 9023 | 2 Nos | 3,467 | 6,934 |
| Pipe vice Cast Iron with hardened jaw open type Pipe vice 100mm | Alfa | 9023 | 2 Nos | 4,760 | 9,520 |
| Oil Can 250 ml | Prima | 9023 | 2 Nos | 176 | 352 |
| Tachometer Analog Type | Standard | 9023 | 1 Nos | 7,639 | 7,639 |
| Stepper Motor with Digital Controller | ANSHUMAN | 9023 | 1 Nos | 24,093 | 24,093 |
| Snip Bent 250 mm | Smith | 9023 | 2 Nos | 347 | 694 |
| Earth Plate | Standard | 9023 | 1 Nos | 11,988 | 11,988 |
| Solar panel with Battery | Standard / Taparia | 9023 | 1 Set | 8,815 | 8,815 |
| AC Ammeter MI Analog | ME | 9023 | 2 Nos | 3,467 | 6,934 |
| Neon Tester | Taparia | 9023 | 21 Nos | 94 | 1,974 |
| Contactor and auxiliary contacts 3 phase | Standard | 9023 | 2 Nos | 5,289 | 10,578 |
| Tachometer Digital | Standard | 9023 | 2 Nos | 2,938 | 5,876 |
| Shaded Pole Motor | ANSHUMAN | 9023 | 1 Nos | 58,176 | 58,176 |
| Scissors blade 200 mm SS | Standard | 9023 | 4 Nos | 494 | 1,976 |
| MCCB 100Amps, Triple pole | Standard | 9023 | 1 Nos | 8,509 | 8,509 |
| Diesel Generator Set | Standard | 9023 | 1 Nos | 112,709 | 112,709 |
| AC Ammeter MI Analog | ME | 9023 | 2 Nos | 3,467 | 6,934 |
| Steel Rule | Kristeel | 9023 | 21 No | 141 | 2,961 |
| DE metric Spanner | DeNeers | 9023 | 2 Set | 1,293 | 2,586 |
| Tong Tester | Metravi | 9023 | 2 Nos | 5,406 | 10,812 |
| Load Bank Lamp Type 6KW 3phase | ME | 9023 | 1 Nos | 89,909 | 89,909 |
| Scissors blade 150 mm SS | Standard | 9023 | 2 Nos | 435 | 870 |
| Contactor and auxiliary contacts | Standard | 9023 | 2 Nos | 8,815 | 17,630 |
| Used DC Generators | Standard | 9023 | 1 Each | 78,156 | 78,156 |
| Kilo Wattmeter | ME | 9023 | 2 Nos | 5,994 | 11,988 |
| Hamme cross peen | Python | 9023 | 21 NO | 306 | 6,426 |
| Drill hand brace | Standard | 9023 | 4 Nos | 1,986 | 7,944 |
| ELCB and RCCB | Standard | 9023 | 1 Each | 13,516 | 13,516 |
| Brake Test arrangement | ME | 9023 | 1 Nos | 93,846 | 93,846 |
| Crimping Tool | Jainson | 9023 | 2 Nos | 1,575 | 3,150 |
| Limit Switch | Standard | 9023 | 2 Nos | 1,763 | 3,526 |
| Megger Analog | Waco | 9023 | 2 Nos | 18,217 | 36,434 |
| Fuses HRC | Standard | 9023 | 4 Nos | 576 | 2,304 |
| Drill SS Twist block | JK | 9023 | 4 Set | 353 | 1,412 |
| Hammer, ball peen With handle | Python | 9023 | 4 Nos | 503 | 2,012 |
| Digital wattmeter | ME | 9023 | 2 Nos | 11,165 | 22,330 |
| Pillar Electric Drill Machine | Siddhapura | 9023 | 1 Nos | 94,904 | 94,904 |
| Growler | Standard | 9023 | 1 Nos | 14,691 | 14,691 |
| Rotary Switch | Standard | 9023 | 2 Nos | 1,117 | 2,234 |
| Crimping Tool 16 sq mm to 95 sq mm | Jainson | 9023 | 2 Nos | 9,778 | 19,556 |
| Knife Switch DPDT fitted | ME | 9023 | 4 Nos | 7,193 | 28,772 |
| Fuses Glass Rewire Type | Standard | 9023 | 4 Nos | 106 | 424 |
| Plane cutters | Anant | 9023 | 2 Nos | 2,656 | 5,312 |
| Pincer 150 mm | Alfa | 9023 | 4 Nos | 235 | 940 |
| Motorised Bench Grinder | Siddhapura | 9023 | 1 Nos | 37,609 | 37,609 |
| Power Factor Meter | ME | 9023 | 2 Nos | 22,918 | 45,836 |
| Soldering Iron | Soldron | 9023 | 2 Nos | 4,231 | 8,462 |
| Cut out Relays | Standard | 9023 | 2 Nos | 4,113 | 8,226 |
| Wire cutter and stripper 150 mm | Taparia | 9023 | 4 Nos | 176 | 704 |
| Knife Switch TPDT fitted | ME | 9023 | 4 Nos | 8,791 | 35,164 |
| Capacitors | Standard | 9023 | 2 Each | 6,464 | 12,928 |
| Smoothing cutters | Anant | 9023 | 2 Nos | 2,656 | 5,312 |
| C- Clamp 200 mm | Standard | 9023 | 2 Nos | 752 | 1,504 |
| Manual Motor coil Winding Machine | Standard | 9023 | 1 Nos | 30,440 | 30,440 |
| FREQUENCY METER | ME | 9023 | 2 Nos | 4,689 | 9,378 |
| Temperature controlled Soldering Iron | Soldron | 9023 | 2 Nos | 9,050 | 18,100 |
| Reverse current | Standard | 9023 | 2 Nos | 4,819 | 9,638 |
| Mallet hard wood 500g | Standard | 9023 | 4 Set | 188 | 752 |
| Rheostat | ME | 9023 | 1 Nos | 2,938 | 2,938 |
| Various electric components | Standard | 9023 | 100 Nos | 294 | 29,400 |
| Gauge wire | Kristeel | 9023 | 4 Nos | 541 | 2,164 |
| C- Clamp 100 mm | Standard | 9023 | 2 Nos | 376 | 752 |
| Ceiling fan coil Winding Machine | Standard | 9023 | 1 Nos | 30,440 | 30,440 |
| 3 point DC Starter | ME | 9023 | 1 Nos | 8,462 | 8,462 |
| Electric Induction plate | Standard | 9023 | 1 Nos | 4,113 | 4,113 |
| Over current | Standard | 9023 | 2 Nos | 5,759 | 11,518 |
| Hammer Extractor type 0.25 kg Claw hammer | Freeman | 9023 | 4 Nos | 282 | 1,128 |
| Rheostat | ME | 9023 | 1 Nos | 6,993 | 6,993 |
| Various Lamps | Standard | 9023 | 1 Each | 18,217 | 18,217 |
| File flat 200 mm 2nd cut | Python | 9023 | 8 Nos | 388 | 3,104 |
| Spanner Adjustable drop forged | Standard | 9023 | 2 Nos | 376 | 752 |
| Primary current | Standard | 9023 | 1 Nos | 116,353 | 116,353 |
| 4 point DC Starter | ME | 9023 | 1 Nos | 8,462 | 8,462 |
| Electric Kettle | Standard | 9023 | 1 Nos | 2,938 | 2,938 |
| Under voltage | Standard | 9023 | 2 Nos | 5,759 | 11,518 |
| Hacksaw frame 300 mm adjustable | Jolly | 9023 | 2 Nos | 310 | 620 |
| Rheostat | ME | 9023 | 1 Nos | 3,996 | 3,996 |
| Plug socket and Piano Switch and Lamp holder | Anchor | 9023 | 2 Each | 235 | 470 |
| File half round | Python | 9023 | 4 Nos | 893 | 3,572 |
| Spanner Adjustable drop forged 300mm | Standard | 9023 | 2 Nos | 376 | 752 |
| AC phase wound slip ring Motor | ANSHUMAN | 9023 | 1 NO | 326,049 | 326,049 |
| Single phase Variable Auto Transformer | ME | 9023 | 2 Nos | 11,694 | 23,388 |
| Electric Iron | Standard | 9023 | 1 Nos | 1,763 | 1,763 |
| Pin Type | ANSHUMAN / Standard | 9023 | 2 Nos | 12,340 | 24,680 |
| Hacksaw frame 150 mm fixed | Belto | 9023 | 2 Nos | 116 | 232 |
| Rheostat | ME | 9023 | 1 Nos | 4,290 | 4,290 |