REPAIR AND MAINT OF PIPE LINE CLEANING OF BOREWELL AND POLE PAINTING AT SAUGAON AND CHANDA COY AND REPAIR OF SUMMER AND COOLING APPLIANCES AT BAGRAKOTE STN UNDER GE SEVOKE ROAD

Amount

Taking down ceiling fan, exhaust fan and wall fan from any location and any height, removing fan blades and caried to workshop for repair/rewinding and refixing the same after repair all as directed by EIC. (Note- Cost of repair items/Rewinding will be measure separatly under relevant items).

M&L for rewinding of wall mounted fan of size upto 600mm sweep with super enamelled copper winding wire of appropriate guage for any make or model including replacement of minor part and reassembling, testing complete all as directed.

M&L for rewinding of ceiling fan of size 1200/1400mm sweep with super enamelled copper winding wire of existing gauge, reassembling the same all as directed by EIC.

M&L for rewinding of exhaust fan of size upto 300mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model, reassembling and testing complete all as directed by EIC.

M&L for rewinding of exhaust fan of size above 300mm upto 450mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model, reassembling and testing complete all as directed by EIC.

Supply & replace ball bearing No 6201 for ceiling fan including taking out old & UNSV complete all as directed.

Supply & replace ball bearing No 6304 for exhaust fan/wall fan including taking out old worn out complete all as directed.

Supply & replace capacitor 2.5 mfd complete all as directed.

Supply & replace capacitor 4 mfd complete all as directed.

Supply & replace canopy (Top & bottom) as per sample for ceiling fan including dismantling complete all as directed.

Supply and replace PVC insulated, PVC sheathed 3 core copper flexible cable round of 1sqmm all as specified and directed.

M & L Fan down rod made out of GI pipe MG 15mm bore and 1.20 mtr long including rubber real and suitable nuts and bolts,safty pin complete all as specified and directed.

Taking down existing unserviceable exhaust fan and S&F new exhaust fan, AC single phase, 230/240 V, of size 300 mm sweep heavy duty steel/aluminium metal body 1400RPM incl making holes on wall & making good the distrubed surfaces as required with all connecting arrangements complete. Model 300MMS.PH TURBO HDEF1400RPM ISI GREY of make Usha or eauivalent of Havells/Khaitan all as specified and directed.

Taking down existing unserviceable exhaust fan and S&F new exhaust fan AC, single phase, 230/240 V, of size 450 mm sweep heavy duty steel/aluminium metal body 1400RPM incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete. Model 450MMS.PH TURBO HDEF1400RPM ISI GREY of make Usha or eauivalent of Havells/Khaitan all as specified and directed.

Taking down existing unserviceable exhaust fan and S&F new ventilation fan with louvers, single phase, 230/240 V, of size 200 mm seeep polycarbonate body, rustproof body & blades, low noise and weight incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete. Make Usha or eauivalent of Havells/Khaitan all as specified and directed.

Taking down unserviceable geyser of any capacity horizontal or vertical for repair/over hauling/replacement of unserviceable parts and disconnection of electric/ water supply lines and refixing the geyser in serviceable condition after assembling in original location & reconnecting the electric & water supply line including testing complete as specified and directed. (Note-Unserviceable spare parts required to be replaced shall be measured and paid separately as 'Supply only')

Supply only heating element of geyser 1.5/2.0 KW triangular/round base shape suitable for old model geyser "ISI marked".

Supply only heating element of geyser 1.5/2.0 KW any shape suitable for new model geyser "ISI marked".

Supply only spike type thermostat suitable for old model geyser.

Supply only wire type thermostat suitable for new model geyser.

Supply only geyser L hook fastener.

Supply only indicating lamp (Red/Green) any shape for geyser .

S&F in repair 3 pin 15/16A plugtop for 230 volts complete as specified and directed.

M&L for maintenance and servicing of Solar water heater capacity upto 300 liters with cleaning of tanks and replacement of unserviceable spare parts complete as specified and directed.(Note-U/S spare parts required for replacement shall be measured and paid separately as supply only)

Supply only 3KW KWIKOT Geyser Hard water element.

M&L for cleaning/servicing of complete 1.5/2TR Window type AC unit complete flushing out all sludge and oil deposited in the copper tube charging of refrigerant as required including cleaning of strainer brushing the same and testing complete all as specified. Note : Refrigerant will be measured and paid saperately

All as per item No 27.00 above but for Split type AC.

Supply only refrigerrant gas (R-22/R-134 etc) suitable for existing compressor model of ACs complete all as specified and directed.

M&L for attending non working AC complaint, disassembling components and finding out faulty component and then replacing it with new complete incl testing all as specified and directed. Note: Spare part will be measured and paid saperately under supply only items mentioned below.

Supply only brand new old model type PCB card

Supply only brand new inverter model type PCB card

Supply only capacitor 50 uFd.

Supply only indoor running motor

Supply only repaired outdoor fan motor (unserviceable existing motor taken to workshop and repaired for fixing again in same location) .

Supply only new sealed compressor suitable for 1.5 TR suitable for window/split AC and connecting up suction and discharge pipe line with gas welding and suitable gas charging complete all as specified.

Supply only new sealed compressor suitable for 2.0 TR suitable for window/split AC and connecting up suction and discharge pipe line with gas welding and suitable gas charging complete all as specified.

Supply only new swing motor.

Supply only temperature sensor

Supply only compatible universal remote control.

M&L for inspecting/finding out leakage in any type of air conditioner unit, repair the same or replace the u/s part with new one complete all as specified and as directed. Note: Spare part will be paid and measured under supply only items mentioned below.

Supply only outdoor Cu condenser coil.

Supply only indoor cooling condenser unit.

Supply only heat insulated Cu tube 1/4 inch dia.

Supply only heat insulated Cu tube 5/8 inch dia.

Supply only drain cap.

M&L for shifting/reinstalling existing AC complete unit any type in other location incl takingdown refixing and gas topup also arranging fixing brackets and testing after reinstalling complete all as specifierd and directed.

M&L for attending non working refrigerator of any type/capacity complaint, disassembling components and finding out faulty component and then replacing it with new complete including testing all as specified and directed. Note: Spare part will be measured and paid saperately under supply only items mentioned below.

Supply only overload relay

Supply only condenser coil

Supply only cooling chamber

Supply only fan motor

Supply only compressor of suitable capacity

Supply only complete filling of refrigarent suitable for existing compressor.

Supply only capacitor 4uFd.

M&L for attending non working deep freezer of any type/capacity complaint, disassembling components and finding out faulty component and then replacing it with new complete including testing all as specified and directed. Note: Spare part will be measured and paid saperately under supply only items mentioned below.

Supply only overload relay

Supply only outdoor condenser coil

Supply only starting and running capacitor set.

Supply only fan motor

Supply only compressor of suitable capacity

Supply only complete filling of refrigarent suitable for existing compressor.

M&L for attending non working water cooler of any type/capacity complaint, disassembling components and finding out faulty component and then replacing it with new complete including testing all as specified and directed. Note: Spare part will be measured and paid saperately under supply only items mentioned below.

Supply only outdoor Cu condenser coil.

Supply only capacitor 60/80 uFd.

Supply only fan motor.

Supply only compressor of suitable capacity.

Supply only complete filling of refrigarent suitable for existing compressor.

Supply only thermostat of suitable type.

S&F hot/cold water PVC geyser connection pipe of 450mm long all as specified and directed.

M&L for taking up/lifting of submersible motor and pump assembly complete of any type/size upto 20 HP with unserviceable cable of any make and capacity from deep tube/bore well (of any depth) after providing lifting tools and tackles complete as required at site, carefully disconnecting of all electric connections, water connections in and including dismantling of column pipe lines shaft (of any size and length stage by stage) and keeping them aside under safe custody for reuse at site complete all as specified and directed by Engr-in-charge

M&L for lowering of repaired submersible motor and pump assembly complete of any type/size upto 20HP capacity with submersible cable of any make and size complete in deep tube/bore well of any depth coupling with pump and motor, in and including connecting and lowering of old or new column pipe line shaft of any size and length (stage by stage) carefully with the help of necessary tools and tackles, reconnecting of all electric and water connections with new nuts bolts washers and rubber gasket and testing on load upto the entire satisfaction of Engr-in-charge complete all as specified and directed. Note: Column pipe if required will be measured and paid under relevant supply only item.

M&L for transportation of defective submersible pump set 10 to 15 HP to workshop dismantling the same incl disconnecting electrical connections decoupling 440 volt AC submersible motor pump set of following capacities, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing an drying, cable jointing and repair replacement of worn at parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete :- Note: Spare parts replaced shall be measured & paid seperately under respective supply only item of schedule. Cost of rewiring and winding materials is included in item rate.

S&F in repair flat submersible motor cable, three core, copper conductor of size 6.0 sqmm, including providing necessary connection and testing on completion complete all as specified and directed.

Supply only stainless steel impeller as per existing suitable for submersilble pump set vertical type (10 HP to 15 HP ) complete all as specified and as directed.

Supply only thrust bearing as per exsiting

Supply only thrust plate set as per existing

Supply only sand guard as per existing

Supply only stainless steel bush as per existing

Supply only pump shaft as per existing

Development of tube well using conventional method by means of air compressor of suitable capacity at least 12 hours minimum, untill sand free/ mud free, clean water obtained from the existing deep tube well, taking up & down of submesible pumping set with column pipe also include in quoted rate & complete all as specified and directed.

Supply only column pipe 100mm dia GI pipe heavy grade, 3 meter in length & both ends long threaded, including provision of heavy duty coupling / socket complete all as specified and directed

Supply only column pipe 80mm dia GI pipe heavy grade, 3 meter in length & both ends long threaded, including provision of heavy duty coupling / socket complete all as specified and directed

Supply and fix in repair Fully automatic three phase star delta starter in sheet metal enclosure type with overload, shortckt, single phasing, locked rotor, earth fault, current unbalance, phase sequence reversal, under current, over/uner voltage protections for 15 HP capacity motor complete all as specified and directed by Engr-in-charge.

M&L for complete servicing of chemical dosing system by cleaning all components, replacing any damaged item, drilling hole in pipe and fixing NRV injection valve and connecting it with high pressure discharge tube to dosting system avoiding any leaks with suitable arrangements and testing after completion all as directed by Engr-in-charge. (Note: all items required to be rerplaced will be paid seperately under supply only items)

Supply only injection valve (NRV) to protects againt backflow and generates optimal pressure all as directed

Supply only Suction and discharge tubes 3/8" high pressure for injecting chlorine all as directed.

M & L for Preparation of metalic surface with sand paper complete all as specified and as directed by Engr- in-Charge

M & L for applying of red oxide zinc chrome on metalic surface complete all as specified and as directed by Engr- in-Charge

M & L for applying of aluminium paint double coat on metalic surface complete all as specified and as directed by Engr- in-Charge

M & L for applying of Yellow/black paint double coat on metalic surface complete all as specified and as directed by Engr- in-Charge

M & L for Preparation of Cement surface with sand paper complete all as specified and as directed by Engr- in-Charge

M & L for applying of exterior priming paint plaster coat suitable for cement surface complete all as specified and as directed by Engr- in-Charge

M & L for applying of weather coat exterior emulsion paint double coat on Cement surface complete all as specified and as directed by Engr- in-Charge

Supply and fix in repair Fully automatic three phase star delta starter in sheet metal enclosure type with overload, shortckt, single phasing, locked rotor, earth fault, current unbalance, phase sequence reversal, under current, over/uner voltage protections for 15 HP capacity motor complete all as specified and directed by Engr-in-charge.

M&L for pipe earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead galvanised iron strip of size 25x4 mm connected to galvanized earth pipe by means of bolts, nuts, checknuts and washers of galvanised iron including PCC (1:2:4) type B-1 precast RCC cover slab with suitable handle made of 6mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia mediaum grade galvanised steel tube for watering with one and fix with cast iron funnel and wire-mesh, with protection pipe of 32mm dia light grade galvanised steel tubing upto 7.5 meters length for drawing earthlead with filling of bentonite in 600mm dia all around electrode etc, complete all as shown in EP number 2 of SSR Part-1 including testing on completion and including taking down old U/S earthing & testing complete all as specified and as directed.

Taking up or down from any position existing water tubing of 20 mm bore any type and connections carefully including cleaning for refixing or removal to E/M store yard or issued as credit complete all as specified and as directed. Note :Excavation/earth work shall be measured and paid separately under respective item of schedule considered here-in-before.

All as per item No. 100.00 above but 25 mm bore

All as per item No. 100.00 above but 40 mm bore

All as per item No. 100.00 above but 50 mm bore

All as per item No. 100.00 above but 80 mm bore

All as per item No. 100.00 above but 100 mm bore

Relaying/refixing of old serviceable water tubing of 20 mm bore jointing and testing as obtained from item No. 100 here-in-before in new or existing position including all new fittings, ISI Marked, such as bends, elbow, tee, reducers, sockets, unions, flange etc as required, laid in trenches or fixed to wall/cellinng or floors including making holes in wall where required complete all as specified and directed by Engr-in-charge.

All as per item No. 104.00 above but 25 mm bore as obtained from item No. 99 here-in-before

All as per item No. 104.00 above but 40 mm bore as obtained from item No. 100 here-in-before

All as per item No. 104.00 above but 50 mm bore as obtained from item No. 101 here-in-before

All as per item No. 104.00 above but 80 mm bore as obtained from item No. 102 here-in-before

All as per item No. 104.00 above but 100 mm bore as obtained from item No. 103 here-in-before

Supply, laying, jointing & testing galvanised iron tubing 20mm bore medium grade with all fittings such as bends, elbow, tee, socket, reducers, unions etc as required at site laid in trenches complete all as specified and directed.

All as per item No. 110.00 above but 25 mm bore.

All as per item No. 110.00 above but 40 mm bore.

All as per item No. 110.00 above but 50 mm bore.

All as per item No. 110.00 above but 80 mm bore.

All as per item No. 110.00 above but 100 mm bore.

S & F in repair gun metal gate/globe valve, 50 mm bore, ISI Marked, with iron wheel headed screwed both ends for pipe including taking down unserviceable complete all as specified and as directed.

S & F in repair gun metal gate/globe valve, 40 mm bore, ISI Marked, with iron wheel headed screwed both ends for pipe including taking down unserviceable complete all as specified and as directed.

S & F in repair gun metal gate/globe valve, 25 mm bore, ISI Marked, with iron wheel headed screwed both ends for pipe including taking down unserviceable complete all as specified and as directed.

S & F in repair gun metal gate/globe valve, 20 mm bore, ISI Marked, with iron wheel headed screwed both ends for pipe including taking down unserviceable complete all as specified and as directed.

S & F sluice valve 150mm, PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engr-in-Charge

S & F sluice valve 100mm, PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engr-in-Charge

M&L for construction of valve chamber with MS sheet cover 4mm thick with angle iron) frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork,paintin one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed of sizes 1200mm x 1200mm x1200mm (internnal dimensions) including demolition of existing valve chamber,complete all as specified and as directed.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep hard/rocky type of soil getting out and levelling of bottom surface to required level for poles/stay assembly/cable all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25m thick all as specified and directed.

Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point all as directed.

M&L for PCC (1:2:4) type B-1 coping/foundation 20 mm graded aggregate for grouting, finished even and smooth without using extra cement all as directed.

RAJIV DEY SARKER

BIJOY DEY