REPAIRS TO CERTAIN ROAD IN DOMESTIC AND TECHNICAL AND RAKSHANAGAR AREA AT AF STN OJHAR

Amount

Material and labour for repair to pot holes not exc 1 sq m each including sweeping in free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and by applying tack coat with bitumen primer @ 5 kg per 10 sq m putting in premixed bituminous macadum well rammed and sealed with binder 9.8 kg per 10 sqm, binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes n exc 30 mm complete all as specified and directed.

Material and labour for preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying tack coat with bituminous primer @ 5kg/10Sqm of paving bitumen of grade VG-10 over bituminous macadam surfaces all as specified.complete all as specified and directed.

Material and labour for repairs to unleveled surfaces, depression, road side cuts etc., by filling premixed bituminous macadam using VG-40 paving bitumen @ 4% by weight to total mix laid by material power, rolled and compacted to required gradient and camber with 8 to 10 tone vibratory power roller (consolidated thickness of 75 mm or less) and laid by (using computerized hot mix plant and mechanical paver) complete all as specified and directed Note:- (i) The rates to be worked out by the contractor for quoting their rate for this item is on the basis of binder content of 4% of the total mix by weight. At the time of actual design mix for the bitumen content more than the specified percentage contractor shall not be reimbursed any extra cost and bitumen content less than the specified percentage then rate shall be adjusted on minus side based on prevailing rate of bitumen.

Material and labour for applying evenly a tack coat with bituminous primer @ 5kg/10Sqm of paving bitumen of grade VG-10 over bituminous macadam surfaces all as specified.complete all as specified and directed.

Material and labour for bituminous premix semi dense asphaltic concrete 30 mm thick (consolidated thickness), using graded crushed stone aggregate premixed with binder (paving grade bitumen VG-40 grade) @ 5.5% binder content by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient complete all as specified and directed. Note:- The rates to be worked out by the contractor for quoting their rate for this item is on the basis of binder content of 5.5% of the total mix by weight. At the time of actual design mix for the bitumen content more than the specified percentage contractor shall not be reimbursed any extra cost and bitumen content less than the specified percentage then rate shall be adjusted on minus side based on prevailing rate of bitumen.

Supply and fixed repairs road convex mirrors having 130 degree of viewing angle made of one piece polycarbonate lens size of 80 cms dia protect with any type of light ray and not produce toxic fumes if burnt, including all fixing arrangements, mounting pole and necessary foundations complete all as specified and directed. Note: The convex mirror supplied by the contractor shall conform to relevant road safety standard.

Material and labour for providing 2.0 mm thick thermoplastic road marking of compound of white / yellow of approved shade for road marking of width not exc. 100 mm and painting lines, dashes,arrows etc on bitumen road / pavement and on concrete/ bituminous surfaces using indigenous modern propelled road marking machine including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate inter filler etc removing old paint by paint remover and cleaning with scrapers for removing all dirt/dust and other foreign matters at site and managing traffic control etc complete all as specified and as directed

Supply and fixing in repairs of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directeded.

Material and labour for 75mm thick, moorum/red bajri as in berms spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Note : The amount against Schedule of Credit on Page No. 26 shall be deducted from the total amount quoted against Sch 'A' while deriving Contract Sum for Acceptance.

SANJAY B SHARMA (BID ID -3169873)

M/S K.K.BINNAR (BID ID -3173824)

Bidder Name

M/s M R MAHANA

M/S K.K.BINNAR

SANJAY B SHARMA