REPAIR TO FLOORING, PLASTERING, JOINERY AND CUP BOARD OF JCO AND ORS MD ACCN AT MIL STN SANGRUR

Amount

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc

10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in two layers (10 mm and 5mm respectively) cement plaster in cement mortar 1:4 (mixed with integral liquid water proofing compound of approved make as per manufacturer's instructions but not less than 125 gms per bag of cement) on fair faces of brick work or concrete external surfaces finished even & smooth without using extra cement complete all as specified and directed. Note: - Integral liquid water proofing compound shall be measured and paid for separately against respective item.

Rendering 5mm thick cement plastering in cement mortar 1:3 as on ceiling, chhajjas & other concrete surfaces finished even and smooth without using extra cement.

Supply only water proofing liquid compound complete all as specified and direcetd

Supply only chicken wire mesh 22 gauge of apperture not less than 20x20mm complete all as specified and directed.

Applying acrylic wall care putty in internal/external walls/ceiling/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting complete all as specified and directed by Engr-in-Charge. Notes : (i) The prepared surface after wall putty, the contractor will inform to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq m.litre/2 coats by using roller/brush to wall surfaces over & incl a coat of interior wall primer @ 20 Sq m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using fwg brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq m/litre/2 coats to ceiling surfaces over & incl a coat of interior primer @ 20 Sq m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using fwg brands of emulsion and primer complete all as specified and directed

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq. m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surdaces over&incl a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacture of exterior emulsion by using fwg brands of emulsion and primer complete all as specified and directed

Taking down old chowkhats or frames any type incl shutter exc 1.5 sqm but not exc 4 sqm, including removal of old material from site, complete all as specifed and directed.

Taking down old chowkhats or frames any type incl shutter n exc 1.5 sqm, including removal of old material from site, complete all as specifed and directed.

Taking down off shutters only any description exc 1.0 Sqm but not exceeding 2.00 sqm, including removal of old material from site, complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 C-0) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc, of size 105x 60mm, complete all as specified and direcetd, including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 C-0) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc, of size 125x 60mm, complete all as specified and direcetd, including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

S&F factory made flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with veneer with 6mm thick lipping frame to match, complete all as specified and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf (Note:- Steel Mongery shall be paid as supply only against respective item.)

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated and fixing following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 200 mm long MS rat tail pattern spring hinge including roller and roller plate - 01 No per leaf. (Note:- Steel Mongery shall be paid as supply only against respective item.)

Providing and fixing aluminium sliding window with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature incl good quality of bearing handle, locks, incl EPDM gasket to render the glazing, air and water tight etc complete all as specified and directed. catalouge of Jindal company or equivalent make as specified. sections of Jindal Company : Three track bottom - 20957, Three track top/verical-20958, handle20606, Interlocking -20605, Top and bottom-20604.

Providing and fixing factory made aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame of 127X38.10X1.74 mm and shutters made of 45X45X1.63mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 32 Gauge in inner shutters and fixing following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf ( Note :- (i) Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item. (ii) Note:- Mongery shall be paid as supply only against respective item.)

Providing and fixing factory made aluminium ventilator with 50 micron powder coating frame of 63.5x38.10x1.29mm and including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed including taking down existing shutter with frame in all respect as specified

S&F factory made aluminium 50 micron powder coated grill opening size 101.6X63.5mm (4"x2½") and approx weight @ 1.345kg/sqm complete fixed in position in window all as specified.

Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed in repair with stainless steel wire stapples complete all as specified and directed.

S&F of 4 mm thick plain glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F in replacement stainless steel tubing of 25mm dia mild steel chromium plated 1.6mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel bracket fancy type, stops etc all as specified and directed as in repair. (For the purpose of measurement and payment running length of curtain rod only shall be considered).

Dismantling floor hearth wall tilling incl CM (beading bud not backing), removing serviceable tiles to store & rubbish off the premises, complete all as specified and directed

M&L for single charge, stainfree, vetrified tiles, Premium (1st) quality straight edge, coloured tiles 600x600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as approved, in neat cement incl and over 20mm thick screed bed in CM (1:4) and pointed in white/coloured cement to match, in floors etc. complete all as specified.

M&L for single charge, stainless, vetrified tiles, Premium (1st) quality straight edge, coloured tiles 600x100 mm and 9-10 mm thick, as in skirting/dado etc. in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150 mm, set and jointed in neat cement slurry over incl 10mm thick rendering in cement mortor (1:4) and pointed in white coloured cement with pigment to match the colour of tiles complete all as specified.

M&L for Baroda Green marble, machine cut as in Shelves/ steps./ cills/ Jambs/ skirting/ border only in tiles flooring and the like works and flooring etc 15-16 mm thick incl bull-nose the exposed sides/lengths, set and jointed in cement slurry over & incl screed of 15mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs incl rubbing, cutting and mirror type granite polishing and incl dismanting/demolition complete all as specified.

Dismantling boarding of any description and fixed in any position fixed with nails or screws and removal complete all as specified.

S&F 18 mm thick LEAD FREE PVC celuka ply of both side plain white color fixed with screws, slovent cement/adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufactured's specification complete all as specified and directed.

S&F 18 mm thick LEAD FREE PVC celuka ply of both side plain of approved color other than white colour fixed with screws, slovent cement/adhesive to make kitchensides top and bottom and shelves inside the cabinets complete as per manufactured's specification complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC celuka ply of approved colour, fixed with screws, slovent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactured's specification complete all as specified and directed.

S&F 18 mm thick LEAD FREE PVC celuka ply as in frames of size 75x40mm of both side plain of approved color other than white colour fixed with screws, slovent cement/adhesive to make kitchen cabinets side top bottom and shelves inside the cabinets complete as per manufactured's specification complete all as specified and directed.

S&F 6 mm thick LEAD FREE PVC ply fixed with screwxed with screws, slovent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactured's specification complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank(KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in postion all as specified

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg make KAFF/Hettich

S&F tower bolts 250 mm long of stainless steel 304 finished/of outer plate metal matt finished complete in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200 mm long matt finished complete fixed in position all as specified.

S&F Paino/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacture's instructions all as specifed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete fixed in position all as specified.

S&F stainless steel 304 grade wire Basket (avg wait 2.5 to 4 Kg per basket) of pull out type like plain/cup& saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position all as specified.

S&F stainless steel 304 grade Basket Cutlery of size 370x485mm permium quality complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 15mm dia and 0.6mm thick stainless steel 304 grade rectangular high gloss finsh complete fixed in position incl S&F brackets /screws etc. all as manufacture's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

Dismantling of plain or corrugated sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Repair to RCC ceiling, sunshades, Chajjas, Balconies, columns, bands, beams, roof slab and similar RCC work at any position /height by dismantling loose/disintegrated portion and dubbing out with cement concrete 1:1/½:3 15mm to 50mm thick using 6 to 12 mm graded stone aggregate to make up and finshed to required shape incl provision of necessary supports if required and stitching of cracks wih mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with MS chicken mesh incl form work where ever required and finished with 10mm thick plastering in CM 1:4 finished even and fair without using extra cement incl preparation of surface to receive finishes complete all as specified and directed.

Framed work such as in angle iron frame for fixing shutters, with ends of bars shouldered and/or riveted, and similar work conforming to Fe 410-0 or Fe 310-0 including dismantling the existing.

M&L for fixing iron Rawl type Anchor Fastener 12 mm dia and 125 mm long incl washer etc for fixing MS frame work to brick/RCC/concrete structures complete all as specifiied.

S&F Multiwall Polycarbonate sheets of 6mm thickness of any colour as approved as in roofs complete fixed in position incl all accessories as per manufacture's instructions incl overlaps etc. all as specified

M&L for ACP sheet of 4mm thickness of approved plain colour shade for chajjas /sun-shades/cladding and the like works etc. fixied to frame work of MS/Aluminium/hollow sections of any size description incl finishing all the joints with slicon or as per manufactures instructions complete in all respect and complete fixed in position incl scaffolding/ladders etc as required and also making the joint between wall and chajjas/sun-shade water proof all as specified.

Supply only Stainless Steel (304 Grade) Finished Butt Hinges 150mm, complete all as specified.

Supply only Stainless Steel (304 Grade) Finished Tower Bolt 200mm long, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Handles 200 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Floor Door Stooper, complete all as specifed.

Supply only 200 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified.

Supply only Powder Coated Aluminium Tower Bolt 150mm long, complete all as specified.

Sipply only Powder Coated Aluminium Handles 150 mm, complete all as specified and directed.

M/s Pawan Kumar Goyal