SPECIAL REPAIRS TO ROOF TREATMENT TO BUILDING NO P17 AT DICKENSON AND CERTAIN REV MINOR WORKS UNDER GESOUTH BANGALORE

Amount

Dismantling of existing brick tiles or terracing tiles, single layer on roofs, waterproofing sheets including screed bed and demolition of concrete upto mother slab and clean the surface thoroughly to make it smooth and free of any foreign material including removing the dismantled debris outside MD land complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 on roof surfaces mixed with WPC @3% by weight of cement finished the surfaces even and smooth without using extra cement all as specified and as directed.(WPC will be measured and paid separetly)

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for PCC 1: 2:4 Type B0 using 12.5 mm graded stone aggregate admixed with advanced latex plus @ 1 litre per bag of cement used complete all as specified and as directed. (Note: 1.Repair the Concrete wherever damaged and Coving of 100 x 100 mm shall be made at vertical and horzontal junction. 2. Admixture shall be measured and paid seperately)

Supply only admixture "advanced latex plus" complete all as specified and as directed. Make: Berger Paints or equivalent

Providing and laying SBR Latex based bond coat after mixing with water and cement at 1:4:7 to improve the bonding between bitumen residual and PU coat or screed complete all as specified and as directed.

M&L for 50 mm thick PCC 1:2:4, Type B1 admixed with Cementmix Plus @ 200ml/bag of cement to the required slope complete all as specified and as directed. (Note: Admixture shall be measured and paid seperately)

Supply only admixture "Cementmix Plus" complete all as specified and as directed. Make: Berger Paints or equivalent

Providing and laying water proofing treatment to the Roof with single component, cold applied, water based Polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the Roof @ 1.2ltr/per m2 to confirms to ASTM D 6083-97a with a density of 1.25 to 1.3kg/per ltr, having tensile strength of 1.5N/mm2, having elongation of 350% with solid content not less than 60% in 3 coats including self-priming of same material & Sandwiching with 40 -60gsm Geo-textile between 2 coats of waterproofing membrane completely as per specification and direction of the Engineer In charge. Make: Berger Paints or equivalent (Note: Item shall be executed through the agency Berger Paints)

Dismantling cement (corrugated, semi corrugated etc,) sheets in roof covering complete all as specified and as directed.

Dismantling wrought iron or mild steel works of any description not otherwise provided for complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F framed brackets of angles or tees with web and flanged cut to shape, drilled and countersunk for screw, incl bending and welding anglres as necessary guesset plates, reveting, wtc., n.exc 10 Kg each brackets conforming to Fe 290, Gde-E-165 complete all as specified and as directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement) complete all as specified and as directed.

Removal of vegetation/tree growth etc on external surface of walls or on roof top in G+3 storey building by taking all necessary precaution to the workers and also the adjacent govt properties including digging out of filling holes with PCC 1:2:4 type B1 using (20 mm graded stone aggregate) and finishing the surface to match adjacent surfaces after application of suitable chemical using " break" or equiavalent manufactured by M/S denocil company or equivalent to avoid re growth of the vegetation and removing the debris to outside the MD land complete all as specified and directed(Any damage to the adjacent govt properties like glass windows , pipes lines etc to be made good without any extra cost incl arrangment of scaffolding (a) For plants girth not exc 5 cm

All as above item No 17 for plants girth exc 5 cm and n.exc 15 cm complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of primer on surfaces of walls complete all as specified and as directed.

S&F grating round 140 mm size of PTMT, (Min wt 50 gms) complete all as specified and as directed.

M&L Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in 75mm thick under floor complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing rubbish off premises complete all as specified and as directed.

M&L 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in sub base of floors complete all as specified and as directed.

S&F coloured Glazed ceramic tile in verticle surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed..

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc including removal of rebris outside MD land complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)

M &L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5sqm but not exc 1.5 sqm etc complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium spap beading, screws etc, complete all as specified and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short bendetc. complete all as specified and directed .(Make Cat part No B 1010102 (Ciena Premium) of Cera or Equivalent in parryware/hindware)

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and as directed.

Spreading and levelling excavated material in floors in layers n exc 25cm thick including watering and well ramming complete all as specified and as directed.

S & F coloured non skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 qm but n exc 0.11 sqm in floors etc set and joined in neat cement slurry and pointed in white cement or coloured cement to match over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement) all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F 30 mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc., provided with stiles and rails as specified, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) all as specified and as directed.

S & F 100mm butt hinges medium weight cold rolled mild steel all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolts and extrude section and fixed all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised all as specified and as directed.

M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and smooth without using extra cement.as in plinth protection incl joints filling all as specified and as directed.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm, all as specified and as directed.

Hangers 6 mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long all as specified and as directed.

M&L 4 mm thick asbestos cement plain building boards, fixed to timber framework with screws as in ceiling all as specified and as directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane all as specified and as directed.

S&F 75mm size PVC floor trap with grating incl jointing with solvent cement all as specified and as directed.

S&F 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F steel work in tubular trusses incl special shaped washer etc., complete using ERW or incl butt welded tubes conforming to I.S. 1161-1998 grade St-240 all as specified and as directed.

Cutting holes in to or through cement concrete slabs, etc superfical area n exc 100 Sqcm as specified and directed

Material and labour for PCC 1:2:4 type B0(using 12.5mm graded stone aggregate) for but on roof slab as required to fill up the undulations to maintain smooth slope (avg thickness 25 mm.) all as specified and as directed.

Material and labour for rendering 15mm thick in CM 1:4 on roof surfaces mixed with WPC finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid seperately.

Supply only integral water proofing compound.

Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) for filleting and benching, slightly rounded or chamfered on edges all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017, 3mm thick and weighing not less than 3.50 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.

Dismantling mangalore pattern roofing tiles with ceiling tiles or slate roofing & similar work all as specified and as directed.

Dismantling unframed timber scantling 40 sq cm and over in section in any position all as specified and as directed.

Dismantling unframed timber fillets, rails, posts, rafters, purlins etc under 40 sq cm in section in any position all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M &L providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in roof kerb or mud stops, rounded or chamfered complete all as specified and directed.

Supply & Fix 35mm thick flush shutters,fabricated at site, solid core construction, with block board core and ply wood face panels commercial type on one face and another face covered with decorative face veneer with lipping / frame to match all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed all as specified and as directed.

M&L for 300mm rat tail rod pattern springs incl roller and roller plate complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:4 on other than fair face of brick or concrete surfaces mixed with WPC @3% by weight of cement over 10 mm thick in cement plaster in CM 1:4 finished even and smooth without using extra cement all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately under relevant item of this schedule)

M&L preparing newly surfaces of walls and applying two coat of distemper oil emulsion incl 2mm thick wall putty and priming plastered and other surfaces with chalk whiting on plastered surface all as specified and as directed.

M&L preparing newly plastered surfaces of walls and applying two coat of cement based paint and other surfaces over one coat of primer alakali resisting priming paint all as specified and as directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc & brushing neat cement slurry with 3.0 Kg of cement per sqm all as specified and as directed.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in sub base of floors all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:6 all as specified and as directed.

Collapsible steel gates, top hung, consisting of Channel Pickets, Pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in posistion and securing runners with holdffast and brackets, complete all as specified and as directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) all as specified and as directed.

S&F in repair harison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed base of cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade to the slab incl rubbing and polishing complete all as specified and as directed.

M&L machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid cement screed and jointed with grey cement slurry mixed with pigment to match the shade to the slab incl rubbing and polishing complete over and including 10 mm thick on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:6 all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

S&F coloured Glazed ceramic tile in verticle surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick rendering in CM 1:6 complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in Hard / dense soil all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls all as specified and as directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth; for foundation etc and getting out in hard/dense soil all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 (40 mm graded stone aggt) as in foundations, filling & mass concrete all as specified and as directed.

M & L reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in foundation, incl rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs under reamed piles and mass concrete all as specified and as directed.

M & L reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts all as specified and as directed.

M & L reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span all as specified and as directed.

M & L reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in chajjas all as specified and as directed.

M & L reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs and in shelves and the like all as specified and as directed.

M&L for formwork to sides of flat concrete foundations, footings, based of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers columns fair finished etc all as specified and as directed.

Formwork to chullah hoods, chajjas and similar items fair finished etc all as specified and as directed.

Formwork to sides & soffits of lintel beams, bands, cantilivers, shelves fair finished etc all as specified and as directed.

Form work to soffits of suspended slab such as roof slabs floor slabs etc Complete including fair finished surfaces all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and as directed.

M&L for rendering 5 mm thk on brick work or concrete surface as in ceiling in cement mortar 1:3 and finished smooth and even without using extra cement all as specified and as directed.

M&L preparation of newly plastered surfaces of wall and applying three Coats of White wash on plastered surface all as specified and as directed.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

M & L for machine cut cudappa stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and as directed.

S & F 15 mm dia stop cock/valve cast copper alloy screwed down, high pressure with ro without crutch or butterfly handle screwed both ends for iron pipe or for union and fixed all as specified and as directed.

S&F Rotaional moulded polyethylene 1000 Ltrs water storage tanks(cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR part I all as specified and as directed.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and as directed.

S&F 20 mm bore gun-,metal, globe or gate valves, with irion wheel head, screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

S & F GI pipe 20 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor all as specified and as directed.

S & F GI pipe 15 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor concealed type all as specified and as directed.

S&F in repair 15 mm bore concussive push button taps of cast copper alloy screwed for iron pipe and fixed all as specified and as directed.

S & F in repair washdown water closet orrissa pattern size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe incl making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan all as specified and as directed.

Supply and fix vitreous china wash hand basin 630x450mm and waste pipe waste coupling etc but incl brackets all as specified and as directed.

S &F vitreous chinaware urinal half stall type white with grating & union for discharge pipe down take pipe etc all as specified and as directed.

S&F vitreous china urinal partion white 310x700mm fixed to wall complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm all as specified and as directed.

S&F 15 mm bore Fancy type two way Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. Make Jaquar Cat No. ARI-CHR-39041.

S & F Health faucet (ABS Body) Mild steel chromium plated suitable for 15mm dia pipe with 1.25 metere long flexible tube and ABS wall hook including making connections and fixed in posistion complete in all respect all as specified and as directed.

S&F swivel shower of PTMT any colour for fixing with 15 mm pipe. (Min wt 40 gms) and shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour. (Min wt 42 gms) all as specified and as directed..

S&F 110x75 mm bore PVC (SWR) reducers all as specified and as directed.

S&F 75 mm bore PVC (SWR) vent cowl all as specified and as directed.

PVC 110 mm bore (SWR), junction single, (Single T) equal or unequal with access door all as specified and as directed.

150 mm dia SGSW pipe ,excavation in ordinary soil at average depth of 1.50M inclusive of RCC manhole covers with angle iron frame work , pipes laid on PCC bed including packing under and haunching against the sides all as specified and as directed.

M&L concrete bed to 150 mm bore drain pipes incl packing under,and completely surronding against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) all as specified and as directed.

Cutting into existing manholes for removing existing branch 150 mm dia drains, making good to walling and rendering, cutting out branch channel and making good benchings complete all as specified.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Excavatoin over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified.

Excavatoin over areas, exc 1.5 m deep and getting out in hard/dense soil complete all as specified.

Removing excavated material exc 1.5 Km but n.exc 5 Km and depositing where directed.

M&L providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier, caps, columns, pillars, bed plates, pintle blocks, anchorage blocks, bounder (for stone walling), setting in cement mortar 1:4 complete all as specified and directed.

M & L Loose filling with aggregate of gauge 80 to 150 mm in soakage pits, soakage wells with broken bricks.

M & L Loose filling with aggregate of gauge 40 to 80 mm in soakage pits, soakage wells with broken bricks.

M & L for sand filling under floors for laying top layer including watering and consolidation complete all as specified

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips.

M&L Reinforced concrete pipes, 250 mm dia class NP3, laid and jointed complete with collars

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor)

S & F 20 mm bore dia medium grade galvanised steel tubings, with all fitting, fixed complete to walls and ceilings or laid in floors/roofs, including taking down old unserviceable GI tubing complete all as specified and as directed.

S & F 25 mm bore dia medium grade galvanised steel tubings, with all fitting, fixed complete to walls and ceilings or laid in floors/roofs, including taking down old unserviceable GI tubing complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 ltr and n.exc 1000 ltr tanks, setting aside (or lowering if required) for repairs, cleaning etc, and hoisting if required reconnecting and re-fixing in position complete all as specified

S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S& F in repair PVC bends any radius 110mm dia

S&F grating square 150 mm size of PTMT, (Min wt 100 gms).

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary modular metal flush box and modular white cover plate for fixing switches, sockets, fan regulators etc. and making good disturbed surfaces in cement mortar 1:3 for one light /fan / bell / CB point controlled by one switch, complete all as specified and as directed.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.

S&F MCB single pole 'C' curve , 240 volts 6 to 32 Amps, complete all as specified and as directed.

S&F MCB single pole and neutral 'C' curve 32 Amps, 240 Volts, complete all as specified and as directed.

M&L Switch Piano type, 5 Amps single pole one way complete all as specified and as directed.

S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral Double door, 4 way, 240 Volts complete all as specified and as directed.

M&L Sub main wiring concealed type with Four runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) including earth coninuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note:- Three runs of 5 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length)

S&F LED lights fitting 1x20 watt, 220V, AC decoratvie box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F exhaust fan, steel body AC single phase 230V of size 300mm sweep with blades, frames and louvers complete all as specified and as directed.

Supply and install hi wall split AC 1.5 Ton Capacity units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating including complete all accessories make- Voltas/Samsung/LG

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designated for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +- 2.5% and capacity 2 KVA Make- V Guard complete all as specified and as directed.

M&L point wiring with 4 Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC casing caping incl 2mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 4 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch complete all as specified and as directed.

Suppluy and fixing metal clad box Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp capacity complete all as specified and as directed.

RAHUL ENTERPRISES

RAJESWARI CONSTRUCTIONS

M/S POTHIRAJ AND CO

Varsha Enterprises

RAMSON TRADERS

PRIYADARSHINI CONSTRUCTIONS