"Shifting of existing S & T gears for infringement removal. Design, Supply, Installation, Programming, Testing, & Commissioning of New Electronic Interlocking (EI) systems. Alteration in existing Electronic Interlocking (EI), modification in Train Management System (TMS)/Interfacing of EI with TMS, Shifting of Auxiliary Warning system, complete Indoor & Outdoor Signalling and Telecom Works in connection with work of HARBOUR BG Line Between Goregaon(GMN) to Borivali (BVI) section & Vasai Road (BSR) station along with development of New Coaching Terminal for Platform returning Trains of Mumbai Division, Western Railway."

FINANCIAL ELIGIBILITY CRITERIA: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case the balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Format-6 (Chapter- 7 VARIOUS FORMATS & PROFORMA), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

BID CAPACITY: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI.

TECHNICAL ELIGIBILITY CRITERIA: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: Similar Nature of Work: 1.The similar nature of work for Signalling indoor & outdoor work (Schedules: A1, A2, B1, B2, E1, E2, F1, F2, G1, G2, H1, H2, J1, K1) amounting to 838310997.22 (92.92% of Total NIT cost) would mean - "Any RI or EI or CLS or ABS or IBS involving Indoor & Outdoor works (Cable laying & termination)" 2. The similar nature of work for Telecom indoor and outdoor work (Schedules: C1, C2, D1, D2, I1, I2) amounting to 63827136.79 (7.08% of Total NIT Cost) would mean - "Any Telecom Work" (b) Composite work (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of a tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.

Modification in existing TMS software modules is one of the important activities required for commissioning of EI. Hence, authorization from OEM must be submitted or the tenderer shall be an experienced firm who has successfully carried out modification in TMS software for at least one station. Relevant documents must be submitted by the firm. Similarly, OEM authorization may be submitted for AWS or experienced firms who have successfully carried out modifications in existing AWS work in the suburban section. Non-submission of authorization from OEM OR proof of experience for TMS and AWS shall result in rejection of the offer, and such bids will not be considered

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

ANNEXURE-V: FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS

ANNEXURE-V(A): (This certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.)

Annexure -VIB: Each Bidder or each member of a JV must fill in this form separately

FORMAT- 4: STATEMENT OF DEVIATIONS

FORMAT-8: LIST OF WORKS IN HAND

FORMAT - 9: NEFT / RTGS MANDATE FORM

FORMAT-12: CHECK LIST OF ITEMS TO BE COMPLIED BY TENDERERS BEFORE SUBMITTING THEIR BIDS. THE TENDERER SHALL ENSURE THAT THE FOLLOWING ARE COMPILED BEFORE QUOTING THE RATES.

FORMAT-13: Certificate of No Relative being an Employee of Western Railway

FORMAT-14: Certificate of Information Regarding Employment/Partnership etc. of Retired Railway Employees with the Tenderer

Annexure to Top Sheet

DETAILS OF PLANT AND MACHINERY ALREADY AVAILABLE WITH THE FIRM

CHECK LIST FOR JOINT VENTURE

CHECK LIST FOR SOLE PROPRIETOR FIRM

CHECKLIST FOR PARTNERSHIP FIRM

CHECK LIST FOR COMPANY