Attending top overhauling of 01 Engine Make TATA, Type 497TC99 of 05 Ton capacity Forklift (BF-09) stationed at ALHW workshop, Haddo Wharf.

Amount

Removing the engine from foundation of the 5 Ton Cap. Forklift (Engine St. No GTY 8-27708. Type: 497TC 99) and dismantling the cylinder head assembly. Push rods, rocker arm, lub oil pump, piston assembly with connecting rod, compressor assembly, fuel pump etc. Inspect, clean. and resurface the cylinder head, replace valves & valve seats, including valve guides, replace or recondition pistons and replace piston rings & liner including honing or boring the cylinder walls if needed to accommodate oversized piston rings, replace all the required gaskets and seal, replace or recondition fuel injectors if needed. Removing all the defective damaged parts and replacing the same with new suitable genuine parts. Thoroughly inspect all components for wear and tear, cracks. or damage, and measure critical dimensions to ensure proper fit and performance. Carefully reassemble the engine, ensuring proper torque specifications and lubrication. Mounting the whole assembled engine on the foundation of forklift, filling the lub oil and start the engine and operate in low rpm in order to set right the newly fitted piston rings with liners as an usual practice and observing the recommended lub oil pressure in the gauge Output pressure of the air from the air compressor etc., Finally the engine is to be tested on its full load etc complete. The rate includes cost of all labourers, transportation, minor and major tools & plants required. all required genuine parts, GST. etc complete but excluding the cost of fuel filters cum water separator. Lub oil filters element, lub oil, fan belts which would be issued by the department on free of cost and then test the engine to verify its performance. The work shall be executed as per the direction of EIC

Charming Construction (BID ID -3234264)

M/s MANIKANDAN ELECTRICALS (BID ID -3234099)