Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.7 LAccepted-AOC ROOM NO 214 GANESH MURTHY NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹49.8 L+₹2.9 L (6.23%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Being other than lowest tenderer |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
23 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col NG Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8461 ADDITION ALTERATION AND SPECIAL REPAIRS TO SUB FIRE STATION SBW JETTY BUILDING NO P 191 C NO 80 FIRE DEPARTMENT AT ND MBI PROVN OF CUPBOARD OVER KITCHEN SLAB AT STAFF QUARTER AT NAVY HOUSE AT ND MBI PROVISION OF GABAGE DUMPING POINT AT INS VAJJR
2022_MES_540655_1
8461/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹87,000
Yes
31 Oct 2022
25 Jul 2022
25 Aug 2022
1 Aug 2022
23 Aug 2022
8 Aug 2022
25 Jul 2022 - 1 Aug 2022
Amount
Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.
Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swanneck, etc. including cleaning or refixing or removal to store ( measured over all as fixed along the centre line over fittings and accessories)
Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.
All as per item No. 4 above but 20 mm bore GI Pipe.
Dismantling asbestos cement (Corrugated, semicorrugated, etc.) sheets in roof coverings sheetings, any gauge, thickness, incluidng Nainital or Similar pattern roof covering.
Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises.
Taking down cement plaster on brick/ surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for.
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc
M&L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6)
All as per item No. 13 above but half brick thick wall built in CM 1:4.
S&F 35 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.
S&F Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., of grade Fe 410 -W(Gde-E- 250) quality- A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
M&L Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane
M&L 8mm thick frosted, on one side sheets ordinary quality glass in squares exc 0.50 Sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm.
M&L for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications.
S&F in repair aluminium anodised Grill (Deco Grill DG 103 of 7.5 mmthick of M/s ELESAR FOCCHI Ltd) fixed with suitable F section No 8584 15.3x23.40x1.4 mm fabricated and rivetted to aluminium windows complete all as specified and directed by Engr-in-charge.
M&L for 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work.
M&L for second class hardwood Plain fillets exc 13 sqcm but nexc 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails or brads. All as specified and directed.
M&L for Veneered decorative plywood, 12 mm thick grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work. All as specified and directed.
S&F 4mm thick backelite with decoratve choice laminated on both side complete as specified and as directed
S&F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11
M&L for 75 mm Butt hinges , cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11.
S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .
S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.
S&F Extended aluminium anodised alloy handles, fabricated type 200mm size.
M&L Brass handles, 75 mm th cast type, polished bright. All as specified and directed.
S&F aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg
M&L for Mortice lock,4 lever vertical type, size 65 mm. All as specified and directed.
S&F for Mild steel door catcher 65 mm size for cupboard door . All as specified and directed.
M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
All as per item No. 36 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.
M&L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.
M&L for Providing 100mm thick cement concrete 1 : 2 : 4 type B-1 using 20mm graded stone aggregate as in floor. for hard standing or sub base and surface shall be finishead with broom including form work as required.
M&L for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling (sunken portion). etc
M&L PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete.
M&L for preparation of coping on top of wall the cement concrete ratio 1:2:4 type B1, using grade 20mm graded stone aggregate the tringle shap and size as per directed by Engr-in-Charge
M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction , as sub floor, 40mm thick. (Water Proofing Chemical shall be measured and paid separately)
Supply only Water proofing chemical Pidiproof LW+ of Dr. Fixit or Equvalent.
M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, as roof kerbs / padding, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent as per manufacturer's instruction etc complete all as specified. (Water Proofing Chemical shall be measured and paid seperately).
M&L Cement concrete 20mm graded aggregate type B2 (1:2:4) in foundations, filling and mass concrete . All as specified and directed.
M&L for the roof surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive bituminous primer, apply bituminous based cold applied primer @ 270 to 300 gms/Sqm manufactured by the same agency as that of APP all as per manufacturers instructions. Laying 5 layered, 4 mm thick APP (A tactic poly propylene) modified membrane reinforced with 180 GSM (Gms/Sqm) of non woven polyester mat, applied by thermo fusion using LPG torch on the bottom portion of the membrane with an overlap of 75mm in longitudinal direction. Note : Rates quoted shall be including disconnecting & refixing of existing AC outdoor units / lighting conductor / lighting arrester / or any other obstructing material etc if required as per site condition complete all as specified.
M&L for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3.
M&L for providing 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of resin base latex polymer and cement slurry by pressure grouting for column, beams and slabs, includind sealing the holes with CM 1:3, all as specified and as directed by EIC.
M&L for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer @ 10 to15% by weight of cement complete & finally finishing the surface all as specified and directed. Make : Dr. Fixit/ Sunanda/ chemestik/ Fosrok. Note :-(New reinforcement and MS Sections will be measured and paid separately)
M&L for guniting (spreyed concrete) on damaged RCC surfaces of columns, slabs, beams etc with concrete mix 1:1.2:2.4 (cement : well graded coarse sand confirming to zone II: 8 mm down well graded coarse aggregate retained on 2.36 mm sieve) added with fibrilated Polypropene Fibres (125 gm per bag of cement) and chemical admixer (Polymer Monobond 5% of wt of cement) min thk of 60 mm incl high tensile welded wire mesh of 5 mm dia @ 50 mm spacing properly anchored with ext surfaces as per the reqmt/ recommenmdations of Engr-in-Charge Including removing all loose dirt, rust / scale from reinforcement etc by using wire brushes, sand paper incl cleaning of exposed surface of reinforcement using blower and applying single component solution of rust remover rust CHM I PIN (RB & CC) and applying one coat of Anticorrosive epoxy coating to steel reinforcement. Note:- (New reinforcement and MS Sections will be measured and paid separately)
S&F welded steel wire fabric, cut to length, fixed to steel members/ reinforcement steel, weigh per Sqm nexc. 4 Kg.
M&L for RCC Type B1 1:2:4 using 20 mm graded stone aggregate slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as directed.
M&L for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0
All as per item No. 55 above but as in stirrups.
S&F pre-painted galvalume aluminium zinc coating GI baseds corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F 0.80mm thick of in mm plain galvanised mild steel sheeting in ridges, hips, valley gutter, drips ;and straight flashings (length and girth as fixed) with grade of zinc coating 275mm.
S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quqlity-A, as in post, runners, rafters, purlins, trusses, steps etc fixed with connecting plates including bending, welding etc complete.
S&F Steel work in tubular trusses any dia required at site and posts incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 all as specified and directed.
S&F for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting plates, base plate etc. welding etc complete all as specified and directed .
M&L for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.
S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.
All as per item No 64 but 15mm or 20 mm dia GI pipes concelled all as above and directed by Engr-in-Charge.
All As per item No. 64 above but 20mm dia medium GI Pipe
S&F white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified complete all as specified and as directed.
S&F white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified.
S&F vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe).
S&F white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete
S&F 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. Complete.
S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs
S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends
S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.
S&F PVC Connections 15mm size with PTMT nuts of length 600mm
S&F chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs.
S&F Soap dish, vitreous china white, approximat size 160X160X90mm fixed in repairs
S&F 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc. (Note:- Measurment shall be taken along the centre line of the pipes.)
S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.
S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.
S&F 110mm dia PVC ( SWR) grade double T with access doors including fixing clips
All as per item No. 81 above but 75mm dia
M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement
S&F polyethylene water storage rotational moulded, 2000 Ltrs Capacity, hoisted and fixed in position with connecting nipple, top cover etc. complete including dismantling old U/S tank of any description.
M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer.
M&L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer.
M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth all as specified and directed.
M&L for preparation of newly plastered surfaces in ceiling , applying three coats of white wash.
M&L for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash
M&L for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction and finishing the surface seven and fair. (Water Proofing Chemical shall be measured and paid seperately)
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L complete removal of existing plastered wall surfaces, over 10cm girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L for preparation of old decorated wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic eanmel paint.
M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
M&L for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil.
Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil.
S & F MS Flat iron wind ties and stays for gutter including securing with bolts and all necessary drilling bolting or riveted etc confirming to Fe 410 or Fe 310 complete all as specified directed.
M&L for Stainless steel grade 316 decorative railings, chains, staircase, covers, (design and pattern as approved) made out of SS pipes, SS flats, SS plates etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as directed.
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. All as specified and directed.
S & F Rolled section as in main and cross beams, angle in any size, hip and jack rafters; purlins, vertical post, plates, pipes where connected to common rafter and running rails and fixing with angle cleats or other connection plates also fixing wind tie bars etc. complete all as specified and directed.
Supply and fix logo multi colour acrylic laser cutting design in office information boards of CG Complex in oval shape of size n.exc 30 cm in height and made in stainless steel material all as per directed by Engr-in-Charge.
Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed by Engineer-in-Charge
M&L point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly all as specified .
One light point controlled by one 5A switch
One Fan point controlled by one 5A switch
One Exhaust fan point controlled by one 5A switch
One 5A flush type switch socket point on same board board
One 5A flush type switch socket point on independent board
M&L point wiring complete with 2.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 2.5 Sq. mm as earth continuity conductor connected to common earth dolly for15 amp swich socket on independant board complete all as specified .
S & F in replacement of Switch piano flush type single pole one way ,5/6 Amps complete all as directed.
Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete.
Supply and fix in replacement switch socket combination multi purpose 3 pin 15 Amps controlled by one switch flush type 240 Volts AC complete.
S & F in replacement of fan regulator electronic step type socket size and making all necessary connections complete all as directed.
S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 teRunning Metreinal, 240 volts, 5 Amps complete all as directed.
S & F Ceiling fan ( BLDC) 5 Star Rating 1200mm sweep , suitable for operation on 230 / 240 V. 50 Hz, single phase, A.C, supply complete with electronic type regulator including connecting up with 3 core flexible cord of size 23/0.0076mm from ceiling rose to fan all as specified and directed. Ceiling fan make : Havells/Crompton/Bajaj
S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/ khaitan / Bajaj
S&F Water heater storage type 25 ltr 5 star rated 230 volt single phase.
S & F in replacement 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB.make -Legrand Cat part no -507814,siemens ,GE
Supply and fixing walll/surface mounted 20W LED batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed by Engr-in-Charge. Make : C&S cat No LTTB4F20WLEDEW BATTEN/Bajaj/Havells/Philips
S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.Make- Legrand/Siemens/GE
S & F in replacement of MCB,SPN 40 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.Make-Legrand,siemens,GE
S & F in replacement of MCB,SPN 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.Make-Legrand,siemens,GE
S & F in replacement of MCCB, 4 Pole, 125 Amp capacity, C Curve type suitable for 415 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.make legrand Cat Part no-408702 Equivalent in Siemens,GE
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 607731 or equivalent in siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 8 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 607735 or Equivalent in siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
M&L for concealed sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing & caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex
M & L Submain wiring with two run 6 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one PVC insulated & unsheathed multistranded copper conductor 6.0 Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly
Supply and fixing in repair of LED 45 W Street/building security light fittings with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection complete all as specified and directed by EIC. Make : Wipro/Jaguar / C & S Cat Part No - LTESSI60WLED
Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed by the Engr-in-Charge.
S&F in replacement of LED highbay light 150 W energy saving and envirment friendly light fitting, pressure dia cost aluminium housing with aim & adjustable bracket, matt finished reflector for gglare elimination, SMD LED with secondary lens with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge. bajaj/C&S/Havells/Philips (Note Existing Servicable Highbay light will be carefully taking down & re- fixied on site.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .