752789 ADDN ALTN TO TRG INFRA OF THREE FACULTIES AT CMM JABALPUR

Amount

SCHEDULE "A" :

Item No 01:- S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including taking down old existing AC/ CGI sheet and manglore pattern tiles as complete all as specified and directed.

Item No 2 :- S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including taking down old existing AC/ CGI sheet and manglore pattern tiles as complete all as specified and directed.

Item No 3 :- M & L for 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gm/ sqm including taking down old existing sheet complete all as specified and directed.

Item No 04 : S & F for mild steel Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe- 410 - W (Fde - E - 250) quality - A including taking down old existing timber scantling complete all as directed.

Item No 05 : S&F mild steel flat iron as in wid tie for roof including securing bolts confirming to Fe 410-W (Gde E-250) complete all as specified and directed

Item No 06 : Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

Item No 07 : Dismantling of timber under 40 sqcm in section as in unframed work in any position as in fillets ,rails, posts, rafters ,purlins etc complete all as specified and directed.

Item No 08 - M&L for Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets suspended flase ceiling system using chicago metallic (e-grid) exposed suspended system, grid size 600x600 mm compressing of GI powder coated main runner of dimension 39 mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.5mm +PPPCGS/0.3,, & weight of runner 1.35 kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm + PPPCGS / 0.3mm & weight of Tee 0.195Jg for 600 mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.30mm & weight of angle 0.700 kg for 3050mm length) with and including 6mm thick HSPC (High Pressure steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for inculation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 kg.clip), hold down clips (wt - 0.0035 Kg/ clip), with provn of light fixture complete all as specified and directed. including dismentling of existing ceiling board all as specified and directed. (Make : Armstrong/ Everest)

Item No 09 : - M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) including demoletion old size brick work complete all as directed.

Item No 10 : - Ditto all as per item No 09 above but except bricks.

Item No. 11 - M&L Machine cut Kota stone slab flooring 20-25mm thick as in floor, over and including 20 mm thick screed bed CM 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab of the slab incl rubbing, polishing & rounding to edges/bull nosed including demolition old existing surface complete all as specified and directed.

Item No. 12 - M&L Machine cut Kota stone slab flooring 20-25mm thick as in riser, steps & skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab of the slab incl rubbing, polishing & rounding to edges/bull nosed complete incl 10mm thick plaster in CM 1:4. including demolition old existing surface.

Item No 13 :- M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm, & not exceeding 0.36 sqm in floors laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old existing floor. complete all as specified and directed.

Item No 14 :- M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm, & not exceeding 0.36 sqm in Wall laid over & including 10 mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Dismantling, old existing surface. complete all as specified and directed.

Item No 15 : M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6, including dismantling old existing wall tiles, complete all as specified and directed.

Item No 16 : M&L Vitrified Ceramic tiles 10 mm thick (square/ rectan gular) polished, area of each tiles exc 0.18 but not exceeding 0.36 sqm, in floors etc, laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor including Dismantling, old existing floor. complete all as specified and directed.

Item No 17 : M&L Vitrified Ceramic tiles 10 mm thick (square/ rectan gular) polished, area of each tiles exc 0.18 but not exceeding 0.36 sqm, in skirting etc, laid over & including 10 mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor including Dismantling, old existing tiles. complete all as specified and directed.

Item No. 18 :- M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles including 10mm thick plaster in CM 1:4 including dismantling old existing wall tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

Item No. 19 :- M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified and directed.

Item No. 20 :- M&L for rendering 15 mm thick (shall be in two layers 10mm in 1:4 setting coat, 5 mm thick 1:4 mm backing coat with WPC) on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth w/o using extra cement complete and using WPC by 3% of weight of cement used all including taking down existing cement plaster complete all as specified and directed.

Item No. 21 :- Supply only integral water proofing compound complete all as specified and directed.

Item No. 22 :- M&L for preparation of newly surfaces of walls and applying two coat of oil bound distemper over emulsion averaging minimum 2 mm thick birla white wall care putty including smoothening surfaces with sand papers over a coat of alkali resistant cement based primer on wall / ceiling surfaces , complete all as specified and directed.

Item No 23 :- M&L for preparation of newly plastered surfaces and wall including cornices, pilasters etc and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

Item No 24 :- M&L for preparation of old plastered surfaces of wall including cornices, pilasters etc and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

Item No 25 :- Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No 26 :- Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No. 27 :- M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Item No. 28 : S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified and directed

Item No. 29 :- S&F Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face,with particle board core supplying and fixing in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed.

Item No 30 :- S&F steel windows with side hung shutters of glazed or fly proofing including Box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Item No 31 : S&F steel windows with side hung shutters of glazed or fly proofing including Box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

Item No 32 : S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed

Item No 33 : S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No 34 : S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Item No 35 - S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Item No 36 : S&F 35 mm thick 2nd class hardwood factory made glazed and skeleton shutters, for window open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I clause 8.20 (a) complete all as specified and directed.

Item No 37 : - S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 No) ,suitable handle (1 No) complete all as specified and directed. Note-Glass and other filling material in panels shall be measured and paid seperately

Item No 38 :- S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as per specified and directed.

Item No 39 :- S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note-Glass and other filling material in panels shall be measured and paid seperately

Item No 41 : S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Item No. 42 - S&F in repairs brass mortice lock (4 levers), vertical type, size 100mm long complete all as specified and directed by Engineer - in - Charge.

Item No. 43 - S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Item No. 44 :- S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Item No. 45 :- Ditto all as item 44 above but frosted glass sheet.

Item No. 46 :- S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

Item No. 47 :- S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

Item No. 48 :- S&F aluminium handles cast type anodised of 100 mm size complete all as specified and directed.

Item No. 49 :- S&F aluminium, anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

Item No. 50 :- S&F aluminium, anodised, barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

Item No 51 :- S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed.

Item No 52 :- S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Item No 53:- M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Item No. 54 :- M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

Item No 55 :- M&L Broken stone hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Item No 56 :- PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 100 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

Item No 57 :- M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Item No 58 : S & F rotational moulded polyethylene water storage tanks of 1000 ltr capacity double layers (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank complete all as specified and directed.

Item No 59 : S & F 15 mm bore galvanized steel tubing, medium grade with all fittings, fixed to walls and ceilings or laid in floors including cutting chasing and making good including taking down old existing water tubing complete all as specified and directed.

Item No 60 : S & F 20 mm bore galvanized steel tubing, medium grade with all fittings, fixed to walls and ceilings or laid in floors complete including taking down old existing water tubing complete all as specified and directed.

Item No 61 : S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 15 mm bore dia of pipe complete all as specified and directed.

Item No 62 - S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

Item No. 63 :- M&L for PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

Item No. 64 :- S&F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

Item No 65 : - S&F 110 mm dia for PVC (SWR) bends any radius complete all as specified and directed.

Item No 66 :- S&F 75 mm dia for PVC (SWR) bends any radius complete all as specified and directed.

Item No. 67 :- S&F for PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement complete all as specified and directed.

Item No. 68 :- S&F in repairs Soap dish (CP) complete all as specified and directed.

Item No. 69 :- S&F in repairs vitreous China Wash hand basin, white, oval shape, size 550 mm 420 mm size counter top, excuding taps, chain & plug & porcelain stopper incl brackets, 40/32 mm dia PVC waste pipe, chromium plate coupling 32 mm dia, pedestal & cutting for and pinning ecds of brackets or erecting stand complete all as specified and directed.

Item No. 70 :- S&F in repair bib tap 15 mm dia, cast copper alloy chromium plated fancy type long body, long nose with wall flange with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

Item No. 71 :- S&F in repair stop/angle valves, cast copper alloy 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

Item No 73 : S&F sheet glass shelf asswmbly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 50 cm long brackets. complete all as specified and directed.

Item No. 74 :- S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white seat cover) including fixing bolts & CP jet system excluding flushing cistern and flush pipe complete all as specified and as directed.

Item No. 75 :- S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe etc and fixed as in repairs complete all as specified and directed.

Item No. 76 :- S&F for repairs 15mm bore dia brass CP mixer wall mixer with L Bend for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Item No 77 :- &F for repairs 15mm bore dia brass CP fancy Central Hole basin mixer with popup waste system with 450mm long braided hoses for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Item No. 78 :- S&F in repair chromium plated overhead shower arms and flange complete all as specified and directed

Item No. 79 :- S&F for repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete.

Item No 80 : S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed.(outer dia min 24mm, section thickness min 1mm)

Item No 81 : M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Item No 82 : M&L two coat of synthetic enamel painting ovr a coat of pink primer including preparation of new wooden surface over 10 cm width or girth complete all as specified and directed.

Item No. 83 - M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Item No. 84 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No. 85 : - M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Item No. 86 :- S&F machine pressed precast concrete interlocking paver block (Glossy finish) any shape and size confirming to IS 15658-2006 of of 80mm thickness M-40 Grade, of size shape colour and pattern as directed laid dry. including 50 mm thick crushed stone sand cuhening complete all as specified and directed.

INTERNAL ELECTRIFICATION

Item No. 87 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed. (Note: New Points for AC, Geysers, & Exhaust fan not considered for taking down.)

Item No. 88 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN / Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

Item No. 89 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials at size and making good disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Item No. 90 :- Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 91 :- M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch outlet point controlled by one switch on the same board.

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on independent board.

(e) One bell point controlled by one, bell switch 5 Amps

Item No. 92 :- All as per item No 91 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Item No. 93 :- All as per item No 91 but using 4 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Item No. 94 :- S&F Modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

Item No. 95 :- S&F Modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

Item No. 96 :- S&F Bell push modular 6 Amps single module complete all as specified.

Item No. 97 :- S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6Amp, 2 module piano flush type complete all as specified.

Item No. 98:- S&F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6Amp, 2 module piano flush type complete all as specified.

Item No. 99 :- S&F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fiffing complete all as specified.

Item No. 100 :- S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 HZ AC supply complete all as specified and directed at site.

Item No. 101 :- S&F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and directed.

Item No. 102 :- S & F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed.

Item No. 103 :- M&L for Sub main wiring with approved colour as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 10.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as direced. (Note:- four runs of 10 sq mm cable, one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit)

Item No. 104 :- M&L for Sub main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as direced. (Note:- Two runs of conductor cable, one run of earth wire and one run of PVC conduit will be measured as one unit)

Item No. 105 :- S&F sheet metal enclosure MCB DB TPN 6 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 106 :- S&F sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnatic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 107 :- S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnatic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 108 :- S & F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 109 :- S & F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 110 :- S & F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 111 :- Fixing only for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 112 :- Fixing only MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 113 :- Fixing only MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 114 :- S & F metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed.

Item No. 115 :- S & F ceiling fan 230 Volts, 1200 mm sweep with main air delivery 210 CFM, service value of the fan shall be greater than 6.1 as per BIS with blades, down rod & other necessary accessories with bushless direct current motor (BLDC) and electrical connections from ceiling rose to fan terminal complete all as specified and directed.

Item No. 116 :- Fixing only ceiling fans with replacement of UNSV 3 core PVC insulated PVC sheased 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, spray painting the fan body and wings with syntetic enamel paint of white colour and filling the cavities complete all as specified and directed.

Item No. 117 :- S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL diect fir lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.

Item No. 118 :- S & F LED 10 Watts batten aluminium extruded with decorative end caps complete all as specified and as directed. (Make- Bajaj Cat Part No BCLSB 10 WH or its equivalent as per Group-I of list of make.)

Item No. 119 :- S & F Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired, with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 form ceiling rose to fitting including LED bulb complete all as directed. (Make :- Bajaj Cat No. BIBWP 10W LED or its as per Group-I of list of make)

Item No. 120 :- S & F for wall mounted LED tube light fitting 20 watts batten for surface molnted, anodized extrded aluminium housing, high transmissitivity diffuser, high lumen etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make:- Bajaj Cat Part No BCLSB 20 W, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent as per Group-I of list of make.

Item No. 121 :- S&F LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed at site.

Item No. 122 :- Fixing only for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, recess mounted light fitting batained from item No 1 with necessary electrical connections complete all as specified and directed at site.

Item No. 123 :- S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements with warranty option of 5 years from date of installation/completion and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. Make :- Bajaj Cat Part No BRLEP 25W LED WH (Edge plus series) or its equivalentas per Group-I of list of make.

Item No. 124 :- S&F PVC non-metallic rigid conduit ISI marked heavy duty white/ivory colour and its accessories heavy duty ISI marked of size 25 mm dia for LAN, telephone and TV connections including cutting chases and making good disturbed surfaces to match with existing finish with plaster complete all as specified and directed.

Item No. 125 :- S&F PVC non-metallic rigid conduit ISI marked heavy duty white/ivory colour and its accessories heavy duty ISI marked of size 40 mm dia for LAN, telephone and TV connections including cutting chases and making good disturbed surfaces to match with existing finish with plaster complete all as specified and directed.

Item No. 126 :- S&F PVC cable tray with cover ISI marked heavy duty white/Ivory colour and its accessories heavy duty, ISI marked of size 100 x 50 mm for LAN, telephone and TV connections complete all as specified and directed.

Item No. 127 :- S & F Energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable o size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick for fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No. 128 :- Taking down existing Single pointed air termination aluminium rod, 12mm dia, 300 mm long keeping safe custody for reuse complete all as specified and directed at site.

Item No. 129 :- Taking down roof conductor aluminium strip 25 mm x 3.15 mm complete with saddles and keeping xisting Single pointed air termination aluminium rod, 12mm safe custody for reuse complete all as specified and directed at site.

Item No. 130 :- Fixing only Air termination, single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified and directed.

Item No. 131 :- Fixing only aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Item No. 132 :- S&F air termination, single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified and directed.

Item No. 133 :- S & F aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Item No. 134 :- Supply & laying 15 mm dia GI tubes Light grade fixed with clamps as per site requirement etc complete all as specified and directed.

Item No. 135 :- M&L test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed.

External Water Supply/ELECTRIC SUPPLY

Item No. 136 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft / loose soil etc complete all as specified and directed.

Item No. 137 :- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil etc complete all as specified and directed

Item No. 138 :- Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No. 139 :- Supply and laying un-reinforced precast concrete cable cover LV, type 1 with peak of size 250 mm x 150 mm x 40 mm with minimum average breaking load 200 kg as per IS 5820:1970, ISI marked, complete all as specified.

Item No. 140 :- Boring holes horizontally under Road without damaging the surface of road (minimum 1.0 Mtr below the road surface with the help of GI tubing of any dia not exceed 80 mm bore for passing of UG cable all mas specified and as directed (GI pipe laid shall be measured seperately).

Item No. 141 :- Supply & laying 40 mm dia GI tubes Light grade in protection of cable at road crossing/ hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed.

Item No. 142 :- Supply & laying 25 mm dia GI tubes Light grade in protection of cable at road crossing/ hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed.

Item No. 143 :- Supply, spread and filling approved sand in cable trenches for cushioning of UG cable all as specified. Note: Punned thickness only will be measured and paid.

Item No. 144 :- Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Item No. 145 :- Supply and laying testing commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi stranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of following sizes complete all as specified and directed.

(a) 4 core x 25 Sqmm

(b) 4 core x 16 Sqmm

Item No. 146 :- M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level, with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part -I including excavation and earthwork in any type of soil/strata and testing on completion Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 1033009.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

C L BHATIA

Deepesh Electricals

DOBARIA BUILDCON

M/S UnitedConstruction

M/s R.V. Constructions

M/s Shrangi Rishi Construction