138WE/L-41/25-26

Amount

Dismantling boarding, any description, fixed in any position with nails

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

Material and labour for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.

Material and labour for 10mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed,over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and directed by Engr-in-Charge.

Supply and fix wooden panelling on vertical surfaces of wall using the following specifications:- (a) Supply and fix IInd class hard wood wooden gutties of size 25 mm x 25mm x 200 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) (b) Supply and fix Horizontal runner II nd class hard wood @ 1.20 mtr C/C of cross sectional area exc 13 Sqcm and 25 Sqcm clean swan with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment. (c) Supply and fix IInd class hard wood boarding 12 to 15 mm with tongue and groove method of fittings as in wall panelling planed one side, and other side wrought fixed with screws. (d) Supply and fix IInd class hard wood decorative beading 40 mm wide on top and bottom along perimeter of the wall or as specified. (e) Material and labour for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface smooth/glossy complete all as specified and directed.

Material and labour for 9mm thick prelaminated particle board interior grade, prelaminated one side with decorated choice lamination and other side balancing white fixed with screws/nails to timber frame work as in wall pannelling, complete all as specified.

Material and labour for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section

Material and labour for 2nd class softwood with plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads but bullnosed, splayed, chamfered or rounded on one edge or face,exc 3 sq.cm and n.exc 06 sq.cm

Supply and fix in repair 750 mm long, 32/40 mm dia, PVC plain waste pipe for sinks/ wash hand basins complete all as specified and directed

Material and labour for painting one coat of synthetic enamel paint including preparation of old painted surfaces of any description, not otherwise described all as specified

Demolition of brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Material and labour for Precast cement concrete solid blocks masonry PCC 1:3:6 type C1, using 20 mm graded stone crushed aggregate & set in cement motar 1:6 complete all as specified and directed.

Demolition cement concrete (unreinforced) of any descriptions, in ground floors not exc. 15 cm thick, above or below ground level, complete all as specified and directed.

Material and labour for 25 mm thick, plain cement concrete, 1:2:4 (Nominal Mix), type B-0 (using 12.5 mm graded stone crushed aggregates) as in floors finished rough surface to receive floor finishes, complete all as specified and directed by Engr-in-charge.

Material and labour for two coat of acrylic emulsion distemper over a coat of primer on plastered surface of any description,including preparation of new plastered surface complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing coat any number of layer complete), removing serviceable tiles to store and rubbish off the premises, complete all as specified

Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry including rendering 10 mm thickness in cm 1:3 and pointed in white or colour cement to match.

Taking down cement plaster on Brick/PCC block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc.

Material and labour for rendering 15mm thick in cm 1:4 concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement

Material and labour for painting new surface with one coat of primer over two coats of cement based paint on new surface

Material and labour for rendering 15mm thick in cm 1:6 concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement incl mixing of wpc .

Material and labour for 10mm thick screed bed or bedding laying of cement mortar (1:6) for as in floor finishes, complete all as specified and as directed.

Supply and fix in repair Soap dish fixed with and including CP brass screws complete all a specified and directed (Make: Jaquar Cat No: AKN-35731P).

Supply and fix in repair chromimum plated brass 32 mm coupling for table top wash hand basin half or full thread fixed complete all as specified and directed. (Make: Jaquar Cat No. ALD-725)

Supply and fix sinks with drainage board made of stainless steel one mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia.

Supply and fix 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors.

Supply and fix PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified.

Supply and fix 75mm bore PVC (SWR) pipe bends any radius.

Supply and fix PVC (SWR) 110mm bore bends any radius, complete all as specified.

Supply and fix PVC (SWR) 110mm bore junction single (single T), complete all as specified.

Supply and fix 75mm bore PVC (SWR) junction single, (Single T) equal or unequal

Supply and fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

Supply and fix Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

Supply and fix Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.( Make : Jaguar/Kohler/Cera and equivalent)

Supply and fix Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

Supply and fix in repair single piece china wash down water closet , with UF soft close seat cover, hinges, accessories set, cistern fittings size 370x690x795mm Make: jaquar Cat No. KUSWHT-358515N or equivalant complete all as specified and directed.

Supply and fix wash hand basin table top type fixed on granite top grooving and cutting if required with long body pillar tap connection and partition boxes below complete all as specified and directed Make: Jaquar cat No SLS WHT-6011 or equivalent

Supply and fix pillar tap single lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. Make Jaquar Cat No. ARI 39005B or equivalent

Supply and fix in repair hand shower ( health faucet ) CP with 8 mm dia. 1.2 Metre long flexible tube and wall hook complete all a specified and directed. Make : Jaquar Cat No. ALD-573 or equivalent.

Supply and fix Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

Material and labour for Waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 600mm

Supply and fix in repair Chrominum plated Bib taps 15 mm dia , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Supply and fix in repairs Stop valves 15mm dis , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified.

Supply and fix 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

Supply and fix PP-R Gate valves 25 mm dia(brass insert) as per requirement of the site

Supply and fix PP-R Ball valves 25 mm dia (brass insert) as per requirement of the site

Supply and fix 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Supply and fix 110 mm dia PVC (SWR) 'S' trap

Supply and fix 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal

Material and labour Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces,complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

Supply and fix in repair Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of up to 700 mm in width and weight not more than 35 Kg and fixed complete all as specified and directed.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames

Material and labour for factory made brown colour solid WPC (wood particle composite) door frame of size 100mmx63 mm single rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and directed.

Providing and fixing 30 mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600Kg/Cum shiuld be 100% lead free door complete all as specified and directed. Make ECHON cat No. LPD-11 or equivalant

Supply and fix only 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position

Supply and fix 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Supply and fix aluminum door handle cast type 150 mm in old or new position

Supply and fix 100mm long mild steel medium weight but hinges cold rolled.

Supply and fix in repair towel rack chromium plated brass fixed to walls with screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35781PS or Equivalent)

Supply and fix in repair glass shelf corner fixed on walls with screws complete all as specified and directed (Make: Jaquar Cat No: ACN-1173 or Equivalent))

Supply and fix in repair chromium plated paper holder fixed on walls complete all as specified and directed. (Make: Jaquar Cat No: AKP-CHR-35753P or Equivalent)).

Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

Supply and fix Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for plain sheet glass 4.80mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane including hacking out complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair urinal divider/urinal partition fixed on walls complete all as specified and directed. (Make: Jaquar /Cera/Parryware or equivalent ).

S& F 1000 ltr capacity rotational moulded polythelene water storage tanks triple layer white colour (cylindrical vertical with clossed top) hoisted and fixed in position including dismantling all as specified in SSR Part 1 complete all as specified and directed .

Dismantling of water tank of any description capacity exc 500 ltr and not exc 1000 ltr complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc all serviceble LED light to be deposited in MES Store complete all as specified and directed.

Material and labour for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light point controlled by one switch with PVC insulated multistranded copper conductor cable FRLS of size 1.5 sq mm for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling/wooden panelling including fixing 3 mm thick bakelite sheet on of any size complete all as directed and specified.

All as per Item No 76 but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 Sqmm size complete all as directed and specified.

All as per Item No 76 but for one 3 pin socket outlet, 5 Amps Independent with cables 1.5 Sqmm size complete all as directed and specified.

Material and labour for point wiring for 3 pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing/caping with sunk cast iron complete all as directed and specified.

Supply and fix in replacement switch piano flush type one way single pole 5 Amp 240 volts. Make : Anchor/Havells or equivalent

Supply and fix in replacement switch socket combination 2 in 1, 5 Amps flush type universal. Make : Anchor/Havells or equivalent

Material and labour for lamp holder PVC/Polycor bonate type insulated body with back plate suitable for batten /angle fittings as specified and directed.

Supply and fix decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 20 Watts LED 6000K with connection 3 core copper wire from ceiling rose to fitting with complete accessories . Make : Havells/ Bajaj/CG or equivalent

Supply and fix in replacement of LED 36watts recessed 2x2 luminaire Warm White to enhance the delight of occupants with comfortable experence through its design & glare free soft illumination and connection of 3 core copper wire with all accessories complete. Make :Havells LHEBAEP5IW1W036 or equivalent

Supply and fix LED 36 watts recessed 2x2 luminaire Cool white to enhance the delight of occupants with comfortable experence through its design & glare free soft illumination and connection of 3 core copper wire with all accessories complete. Make : Havells LHEBAEP5IW1W036 or equivalent

Supply and fix Energy saving, environmental friendly, long life, decorative Recess Ceiling mounted LED 20 Watt with washers suitable tilted 70° outwards and swivels 360° to offer best illumination on the wall and retail displays including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings. Make: Havells PARKLEPROSNOOTDLR20W 830MOD30 DWHTNEEM or equivalent

Suppy and fimxing Energy saving, environmental friendly, long life, decorative, corrosion resistant Hanging light 25 watt including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings. Make: Havells Cat NoMONDO400RDP/S25WLED830SPSWH or equivalent

Supply and fix in replacement of MCB DB SPN Regal Gray 12 Way double door 240Volt 50Hz with complete accessories. Make : Havells / ABB/Schenider or equivalent

Supply and fix in replacement sheet metal enclosure TPN DBs with 200 Amps rated bus bar of 8 way 415 volts with blank plate complete with double door, complete all as specified and directed by Engr-in-Charge. Make : Havells/ABB/Schneider or equivalent

Supply and fix in replacement of MCB SP 6 to 32 Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/Indoasian/ C&S or equivalent

Supply and fix in replacement of MCB SP 40 Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/ C&S or equivalent

Supply and fix in replacement of MCB SP 63 Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/ C&S or equivalent

Supply and fix in replacement of MCB SPN 40-63 Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/ C&S or equivalent

Supply and fix in replacement of MCB TPN 100Amps 'C' series complete all specified and directed by Engr-In-Charge. Make : Havells/ABB/ C&S or equivalent

Supply and fixing LED lamp 5 Watt 230V, complete all as specified and as directed by Engr-in-Charge. Make : Havells or equivallent in BAJAJ/CG/Philips/Wipro)

Supply and fix for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 2 x 10 sq. mm +1x10 sq. mm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in required in existing surpace recessed PVC conduit incl taking down old one complete all as specified and directed by Engr-in-Charge

All as per item no 96 but size 2 x 16 sq. mm +1x 16 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.

Material and labour for earthing complete with Copper earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including copper strip of size 20×3mm by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 m GI earth lead.

R B TRADERS (BID ID -3322054)