Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹37.9 L+₹9.2 L (32.2%)Rejected-Finance S 170 B 192 VILLAGE JHARERA DELHI SOUTH WEST DELHI DELHI 110010 | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance Other than
lowest
bidder | |
| 3 | L3₹38.1 L+₹9.4 L (32.7%)Rejected-Finance 704 NEW PUMP HOUSE NEAR RED ROSE SCHOOL BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L3 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
5 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
REPAIR / MAINTENANCE OF ROOF TREATEMENT, SUNKEN REPAIR, PLASTERED WORK ETC IN OLD CAMP AREA UNDER AGE B/R-II BABINA CANTT
2023_MES_593473_2
8135/E8
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹86,000
Yes
30 Jan 2024
4 Nov 2023
9 Dec 2023
4 Nov 2023
5 Dec 2023
21 Nov 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Sunken waterproofing Tretment by SmartCare Ultron in following steps :- (i). Surface Preparation: Minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare SRP ii). Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare SRP (iii). Supplying & grouting the gaps around the pipe / inserts with SmartCare General Purpose Grout, a non-shrink cementitious waterproof grout. The “Nahani” trap, etc is to be fitted securely in the same manner & the gaps around it to be grouted with non-shrink Grout or equivalent (iv) Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane and all as specified and as directed. Make- Aisan paint/ fosroc/Pidilite
M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor over and including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed.
M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor over and including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed.
M&L glazed ceramic colour tiles 300mmx450mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:4, complete all as specified and directed.
M&L glazed ceramic colour tiles 300mmx200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed
Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 15 mm dia complete all as specified and as directed.
Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 20 mm dia complete all as specified and as directed.
S & F galvanised steel water tubing medium grade 15 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 20 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S/F in repair of stop valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia complete all as specified specified.
S&F in repair 15 mm bore stop valve (angle cock two in one) cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.
S&F in repair 15mm bore bib taps cast copper alloy fancy type chromium plated screwed for iron pipe or for brass ferrule complete all as specified and as directed
S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
S&F vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed
S and F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in repair including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed
S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items
S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.
Supply only 15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks abd fly -nuts screwed for iron pipe and fixed
S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed all as directed.
S&F PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointingcomplete all as specified and directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete.
S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.
Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm bore complete all as specified and as directed
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and as directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110 mm bore complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110 mm complete all as specified and as directed.
S and F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.
S and F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and as directed.
S & F in repair of Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.
S and F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed.
Taking down cement plaster on brick/concrete or stone walls etc incl racking out joints hacking for key and scrubbing down with water etc complete all as specified and as directed.
M&L rendering 10 mm thick CM (1:4) on concrete/brick surfaces on wall etc incl finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and nitobond chemical as per manufacturer instruction and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineer in charge.
M & L for applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.
Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.
M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete (on parapet wall) all as specified and as directed.
M&L Brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.
M and L for toothing and bonding with cement mortar (1:6) for openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.
M &L for Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) under floor and as directed by engineer in charge.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.
Taking down old existing unserviceable HDPE water storage tank(PVC/RCC and of capacity n exc 500 ltrs etc complete all as specified and as directed
Taking down old existing unserviceable HDPE water storage tank (PVC/RCC) and of capacity exc 500 ltrs but n exc 1000 ltrs complete all as specified and as directed
S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
Disconnecting existing tanks, Exc 250 & n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).
Disconnecting existing tanks, Exc 500 & n exc 1000 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).
S & F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe 20 mm dia and fixed in new tank (minimum weight 20mm 210 gm) complete all as specified and as directed
S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms 20mm-210gms /25mm-455gms/40mm-690gms complete all as specified and as directed
Taking out /Dismantling of existing roof treatment of any description , any position over roof including taking out plain cement concrete of any description to the thckness as directed etc complete and including lowering down complete waste materials to the ground on a place where directed and including removal of the same to a distance exc 250 mtr but n exc 500 mtr as directed . Note : The cost of lowering down and removal deemed included in unit rtae quoted by the tenderer.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only
Supply only integral water proofing compound complete all as specified and as directed.
M&L applying water proofing treatment with the following:- (a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated. (b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 150gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction. (c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane.
M &L for Plain concrete cement tiles 20cm X 20cm x 20mm set, jointed and pointed in neat cement slurry on roof over & including 15mm thick screed bed in CM (1: 4) and joint between the tiles to be filled with chemical like Grout etc Complete all as specified and directed.
M & L for preparation of newly/old surface of APP membrane and Apply two coat of bituminous aluminum paint @ 200 gm / Sq.m. complet all as specified and as directed.
Ayush Enterprises
M/s Pratham Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .