SPECIAL REPAIRS TO BLDG No. P-28 (ADM BLOCK) AND PROVN OF TOILETS, URINALS, WASH HAND BASIN NEAR MAIN GATE No. 1 AND MT AREA OF 641 EME BN UNDER AGE BR II SOUTH PUNE

Amount

Dismantling boarding/ceiling of any description, fixed in any position like partition etc with nails including frame work of timber

M&L for Gl framework for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S&F 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/C including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish ( Frame work for ceiling shall be measured & paid separately) complete all as specified and directed. (Note for item No 2 & 3 : Cost of making framework for light fittings/ grills/ diffusers and cutting to shape in ceiling etc shall be deemed to be included in the quoted rate of item.

S&F PVC false ceiling consisting of 595 X 595 mm , 5mm thick plain exposed PVC sheet of 600 kg/cum density manufactured by an ISO certified company,used as panel inserted in a frame work made from anodised aluminium T-section of sizes 25X25mm 19 gauge or 1mm thick in square pattern of grid 600X600mm.The minimum frame work supported from the ceiling with 'J' hooks and GI wire/6mm MS rod of required size to maintain proper level etc.The aluminium frame work is supported on side wall with the use of alum 'L' section of 25X25mm angles etc complete all as specified and as directed by engr-in-charege and as approved by GE. (Make :M/s Rajshree/Armstrong/Syntex as approved by GE)

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specified and as directed.

Taking down shutter from the frame exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Taking down shutter from the frame exc exc 1 Sqm and n.exc 2 Sqm each and refixing in same opening after repairing, easing etc. complete all as specified and directed.

S&F two track sliding window with two or more shutter with 4mm thick plane glass or frosted alongwith good quality bearing, handle, lock etc using following aluminum powder coated sections as given in 'JINDAL' Catalogue. (a) Bottom frame rail - 20619 (b) Top frame & Vertical - 20681 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed.

Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face,with particle board core, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 all as specified.

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panels) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces, complete as specified and directed.

S&F framed work such as grills, gratings, etc. with end of bar shouldered and/or riveted or forged in to spikes framed guard bars barred iron doors, ladders, framed blausters, walk ways, railings, frame work of water tanks and similar work confirming to Fe 290 Gde-E-165

S&F Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixing in repairs 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed by welding to the pressed steel door frame complete as specified and directed.

Supply and fixing 200 mm aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed with steel screws, complete as specified and directed.

S&F Aluminium anodised 150mm handle cast type, complete as specified and directed.

Supply and fixing 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed with steel screws, complete as specified and directed.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark complete all as specified and directed

M & L for Water proofing treatment to sunken slab, walls etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet / Baths / WCs / Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.

ITEM NO. 21.00 CONTD... (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and pply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh etc complete all as specified and directed by Engineer-in-Charge. (a) SP 20048 (b) Glazing clips 19352

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm thick plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following sections as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall of ISI mark complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified.

Demolition of cement concrete (unreinforced) of any decreiption and in any position not otherwise specifically provided for

M&L for 25 mm thick plain cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) as in floors complete all as specified and directed.

M&L for granite 16-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M & L for Double charged Vitrified tiles 10 to 15mm thick (Square/rectangular) of size 600 x 1200 mm in floor, etc set & jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed . (Make : Kajaria/Johnson/Somany or equivalent)

All as per item No 30.00 above but as in skirting over 10mm thick back coat in CM (1:4) complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.09 Sqm but not exc 0.18 Sqm in floor etc set & jointed in neat cement slurry and poited in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and directed .

Material and labour for coloured glazed ceramic tiles of size 300mm x 600mm x 7 to 8mm thick of colour and pattern as approved by EIC, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over back coat of 10mm thick in CM 1:4 complete all as specified and as directed.

Demolition of stone / block masonry /brick masonsy built in CM complete all as specified and as directed.

M&L for Brick work with Fly ash brick, straight or curved on plan exc 6M Mean radius built in type CM 1:6 complete all as specified and directed.

S & F Aluminium anodised Powder coating of ivory / brown colour frame / shutters for windows / doors / Ventilator with one or more rebates including joining cleat, glazing clips,anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed

S&F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of structural steel work including doors, gates etc complete all as specified and as directed.

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed.

M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying, two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone wall etc. incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cm 1:3 on fair faces of brick work or concrete surface in ceiling of roof, chhajja and facia etc complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed.

Material and labour for Flush pointing to squared rubble masonry, coursed or uncoursed in CM 1:4 including raking out joints complete all as specified and as directed.

M & L for 2mm thick wall care putty on wall complete all as specified and directed

M & L for 2mm thick wall care putty on ceiling complete all as specified and directed

M&L for Preparation of old painted surfaces of wall and applying two coats of Plastic emulsion paint complete all as specified and directed

M&L for Preparation of new plastered/putty surfaces of wall and applying two coats of Plastic emulsion paint over a coat of primer all as specified and directed

M&L for Preparation of new plastered/putty surfaces of ceiling and applying two coats of OBD over a coat of primer on ceiling all as specified and directed

M&L for Preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed.

M&L for Complete removal of existing treatment on walls/Stone masonary wall by scrapping washing rubbing down etc and applying two coats of Exterior emulsion paint over a coat of primer on stone masonry surface all as specified and directed

M&L for Preparation of old painted surfaces of ceiling and applying two coats of OBD on ceiling complete all as specified and directed

M&L for Preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm bore complete all as specified and as directed.

Cutting chases, pinning in, making good to fancings where required and pointing in cement mortar 1:3 to edges or edges of landings, steps, cills etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm girth in Stone walls/Brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm bore complete all as specified and as directed.

M&L for GI tubing 15mm bore medium grade with all fittings & fixed concealed to walls & ceiling or laid in floors complete all as specified and as directed.

M & L for GI tubing 20 mm bore medium grade with all fitting & fixed concealed to wall & Ceiling or laid in floor complete all as specified and as directed.

S&F Stainless Steel Nahani trap Squarewith trap 6'' x 6'' with grating of diameter of outlet 75mm. Ruhe 304 Grade Stainless Steel Product Code : 16-0306-14 complete all as specified and as directed.

S&F Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings complete all as specified and as directed. (Make : Jaquar of cat no SLS-WHT-6851S110PP or equivalent model in Kohler)

S&F in repairs Hand Shower (Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. (Make : Jaquar Product code ALD-CHR-577or equivalent model in Kohler)

M&L for Vitreous China urinals URS-WHT-132530 of Jaquar with fixing accessories complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing auto closing concealed urinal flush valve PRS-CHR-073 of Jaquar, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F Pillars cock with extension body of Jaquar Cat No FUS-CHR-29021N or equivalent complete all as specified and as directed.

S&F in repairs CP toilet paper holder confirming to CAT No ACN-WHM-1153S of "Jaquar" or equivalent complete all as specified and as directed.

S&F in repairs Soap dish holder confirming to CAT No ACN-WHM-1131N of "Jaquar" or equivalent complete all as specified and as directed.

S&F in repairs 2-Way Bib cock with Wall Flange conforming to Jaquar Product code FLR-CHR-5041N or equivalent complete all as specified and as directed.

S&F in repairs CP Bibcock with Wall Flange complete all as specified & directed. (Make : Jaquar Product code CON-CHR-047KN or equivalent specified here in after)

S&F in repairs Counter top basin of Size 610x415x160mm conforming to Jaquar Product code DRS-WHT-37601 or equivalent complete all as specified and as directed.

S&F Bottle trap (with internal Partition) 32mm size with 250mm & 190mm Long wall connection pipes and wall flange complete all as specified & directed. (Make : Jaquar Product code ALM-WHM-769L250x190 or equivalent specified here in after)

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc all as complete and directed. (Note : Pipe will be laid under floor all as directed)

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed. (Make : Cera/Parryware as approved by GE).

S&F in repair steel grating 150mm size of ISI mark complete all as specified and as directed.

S&F in repair aluminium powder coated decorative type curtain rod 20mm dia complete all as specified and as directed

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr depth n exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for reinforced concrete pipes, 150 mm bore, clase NP2 laid and jointed with collars complete all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm in soils complete all as specified and as directed.

Removing excavated material exc 250 m & n exc 500m in soils complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) any size / specification set in cement mortar complete all as specified and as directed.

S&F 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

All as per Sr. Item No. 88.00 above but 110mm bore complete all as specified and as directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm bore complete all as specified and as directed.

All as per Sr. Item No. 90.00 above but 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S & F Machine cut cuddappa stone 25 to 30 mm thick both side polished bedded & jointed in CM (1 : 3) complete all as specified and as directed.

Removing excavated material to a distance of 250 m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified & directed.

M&L for PCC (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection of average 75mm thick. Finishing cement concrete surface even and smooth without using extra cement

M&L for RCC (1:2:4) type B1 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation,beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC (1:2:4) type B1 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC (1:2:4) type B1 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC Slabs supported on walls,beam and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like, type B-1, 1:2:4 (20mm graded ) complete all as specified and as directed.

Supply only integral water profing compound.

M&L for water proofing treatment to RCC roof slab and shall be carried out as specified below and as directed (a) 10mm thick screed bed in CM 1:3 on concrete surfaces of roof slab and parapets mixed with and including WPC @ 3% by weight of cement finished even and smooth without using extra cement. (b) The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projection , surface washed, dried up and cleaned of all foreign matter and dust to receive primer. (c) Applying bituminous primer on cleaned surface @ 0.40 Litre/Sqm. (d) Providing APP polymer modified approved membrane 3mm thick, non woven, polyster,weighing not less than 3.6 Kg/Sqm and laying on roof surface and parapets with laps, overlaps and sealing joints as specified and applied completely by torch application method, the overlap of membrane while torching shall be kept 100mm on length wise and 100 mm width wise; all as specified & directed.

ITEM NO. 104 CONTD.... (e) Carrying out test by flooding water for 24 hrs for leakages & seepages and rectifying the same to the entire satisfaction of GE. (f) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 litre/Sqm on the top of membrane surfaces complete all as specified & directed. (g) The treatment shall be carried out as per manufacturers instructions and through authorised applicator of manufacturer. (Note :- The contractor shall furnish the following :- (i) Quality confirmation from the manufacturer of the product alongwith quantity supplied. (ii) Manufacturer test certificate. (iii) The result if tested any of the independent laboratory, the testing charges shall however be borne by the contractor).

M&L for form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200 mm thick on rough finished surface complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels, cantilevers, shelves including SllP~ portsl overhangs, etc. also splays between floors and beams, etc.on rough finished flat surface of concrete complete all as specified and as directed.

Use and waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions on rough finished surface complete all as specified and as directed.

Use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface complete all as specified and as directed.

M&L for Mild steel TMT bars 8 mm dia and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per Sr. Item No. 109.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 with water proofing compound on concrete/brick surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

S & F 100 mm butt hinges, excruded aluminium alloy type B-21 with galvanised mild steel ISI markedhinge pin, anodised and fixed with wooden screws complete as specified and directed.

S&F Rotational moulded polyethylene water storage tanks 1000 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 complete all as spoecified and directed.

S&F 20mm bore ball brass valve, high pressure with polythine float and fly nut complete screwed for iron pipe or brass ferule complete all as specified and directed.

M&L for two coats of Oil bound distamper including prepration of newly plastered wall surface over a coat of primer complete all as specified and as directed.

M&L for Vitreous China urinals, half stall type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. (Make : Cera of cat no S4020107 or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE

S&F 15mm bore brass self closing angle cock prismatic for urinal with wall flanges and 200 mm connecting pipe fixed complete all as specified and as directed. (Make : Cera of cat no F9020203 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE. )

S&F in repair urinal spreader of brass body chromium plated for fixing with 15mm dia pipe suitable for urinal complete all as specified and as directed. (Make : Cera of cat no F8070201 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE)

S&F for snow white vitreous china table top thin Rim Wash Basin type of overall size 485 x 370 mmx 110mm, cat No S2020162 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed by Engr-in-Charge. (Make : Cera of cat no S2020162 or equivalent model in Hindustan Sanitary Ware Industries (1st quality) (Hindware only) / Parry Ware (Super fine) /Neyveli Ceramics (Neycer) (1st quality) as approved by GE)

S&F Pillars cock with swan neck spout left and areator for iron pipe complete all as specified and directed (Make : Cera of cat no F2007104 or equivalent model in Jaguar/Marc/ ESS-ESS)

S&F in repairs vitreous china wash down floor mounting EWC of snow white colour including fixing bolts etc with flat bottom complete all as specified and directed. [Make : Cera of cat no S1050106 S trap or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine)]

M&L for in repairs of plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated hinging device complete all as specified and as directed. [Make : Cera of cat no B1510103 or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine)]

S&F in repairs Health faucet complete all as specified & directed. (Make :- Cera Cat No.F8030301 or equivalent model in Jaguar/Marc/ ESS-ESS)

S&F in repairs CP toilet paper holder confirming to CAT No CAN-1151N of "Jaquar" or Equivalent make here in after.

S&F in repair stop cock fancy type CP cast copper alloy with capastan heads screwed down high pressure of 15mm dia complete all as specified and directed. (Make : Cera/Parryware as approved by GE).

M & L for GI tubing 25 mm dia medium grade with all fitting & fixed complete to wall & Ceiling or laid in floor complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F as in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed.

S&F CP Two way bib cock with wall flange complete all as specified and as directed.

Supply and fix in repair 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.

Supply and fixing PVC (SWR) pipe single socketed in any length with rubber ring jounts fixed to walls for 110mm bore of 6kgf/cm2 capacity complete all as specified and as directed.

All as per Sr. item No. 132.00 above but 75mm bore of 6kgf/cm2 capacity complete all as specified and as directed.

M&L for precast inerlocking paver blocks glossy finish with any shape and size conforming to 15658-2006, 60mm thick M-35 grade with grey cement and pigment laid over & including 75mm thick stone dust/grit complete all as specified and as directed

M&L for 100mm plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

M&L for cement concrete type B1 1:2:4 (using 20 mm gradded aggregate), in coping, edging etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded agg) in foundation filling and mass concrete complete all as specified and as directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia RCC pipe complete all as specified and as directed.

Excavation in trenches not exc. 1.50 mtr wide & n. ex. 1.50 mtr in depth for foundation not exc. 10 Sqm on plan and n. exc. 1.50 mtr in depth and getting out in any type of rock complete all as specified and as directed.

M & L for point wiring complete with and including single core PVC FRLS insulated unsheathed flexible bright annealed multi stranded copper conductor cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls/ floors/ ceiling including all conduit accessories / fittings/junction boxes / inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches, sockets fan regulatos etc; including 1.5 Sqmm (22/0.30 mm)1100 V grade FRLS,PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earthwire connected to metallic bodies of luminaires/fans etc; at one end and to common earth dolly at other end, all as specified, directed (Note : Making good of disturbed surfaces will be done by contractor without any claim)

All as per Ser. item No. 141.00 above but for One 5A 3 pin switch socket outlet on same board complete all as specified and as directed.

All as per Ser. item No. 141.00 above but for One 5A 3 pin switch socket outlet mutipurpose on independent board complete all as specified and as directed.

All as per Ser. item No. 141.00 above but wiring complete with 4.0 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and as directed.

Supply and fix switch piano flush button type 5 amps SP one way complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 Pin 5 Amp flush type 240 volts complete all as specified and as directed.

Supply and fix socket 2/3 pin ,15/16 A flush type complete all as specified and as directed.

Supply anf fix lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings.

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals complete all as specified and as directed.

Supply and fix LED box type fitting pre-wired including LED tube 1x18/20W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable complete all as specified and as directed. (Make:- Havells or equivalent model of make Philips /GE/Crompton)

S&F in repairs Oval plastic bulk head LED luminaire 10Watt,6000K with IP 65 Protection Model LHEOAOP7UZ6WO10 Make Havells or of equivalent make specified here-in-after

Supply fix MCB DB of sheet metal enclosure double door SPN 8 way with 200 Amps rated bus bar 230 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

S & F MCB SP 6- 32Amps, 240 V,50 HZ,C series breaking capacity 10KA all as specified and directed. (Make-Havells,Cat part No.-DHMGBSPF006-032 or of equivalent make specified here-in-after)

Supply MCBs, SPN 40 to 63 Amps, 10 KA , IS/IEC 60898-12002 marked fixing in DBs complete all as specified and as directed. (Note : DBs catered separately in this Schedule) (Make:- Legrand/Havells/ Schneider)

M&L for ventilating Exhaust fan 300mm sweep,230 volts with blades and louvres fixing on wall complete with nut bolts incl duct for exhaust all as directed by engineer in charge.

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)

M & L for submain wiring complete with 2x4.0 Sqmm,1100 volts grade, PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in PVC conduit concealed in wall of suitable size, including continuous PVC insulated copper earth wire 1x 4 Sqmm complete all as directed. (Note :- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) Three runs of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit)

Supply, laying, testing and commissioning of UG LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches / ducts / under plinth floors passing through pipes etc, fixed on wall complete of 16 sqmm,2 core complete all as specified and as directed.

Supplying and laying G.I. Tubing 40mm bore light grade for encasing L.T. cables for mechanical protection, laid under plinths/floors/roads/paths /culverts or fixed on walls or concealed in walls or along the steel poles including M.S. F.I. clamps with necessary bolts nuts and washers & sealing ends with hession cloth impregnated with bituminous compound in ground and with teak wood bushes for ends etc. for fixing complete all as specified and as directed.

Excavating in trenches not exc 1.5m wide & not exc 1.5m in depth; for foundation, etc. or for manholes etc not exc.10 Sqm on plan and n.exc.1.5m in depth and getting out in soft/loose soil complete all as specified and directed

M&L for laying of Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 100 mm, 2 nos half round (for bottom and top) and before laying exacaved area shall be leveling all as specified and directed.

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

M & L for wiring complete with 1.5 sqmm single core FRLS grade PVC insulated unsheathed,1100V grade copper multistranded PVC insulated FRLS grade copper earth continuity conductor cable 1.5sqmm connected to common earth dolly FRLS wires to be drawn in PVC non metallic rigid conduit concealed in brick / stone wall including steel terminal boxes made out of 1.2 mm thick GI sheet concealed in walls for housing the modular switches, socket outlets ,fan regulators One light/one fan point controlled by one switch

All as per item No. 165.00 here in before but for One 5A 3 pin switch socket outlet on same board complete all as specified and as directed.

All as per Ser. item No. 165.00 above but for One 5A 3 pin switch socket outlet mutipurpose on independent board complete all as specified and as directed.

All as per Ser. Item No. 165.00 above but One bell point controlled by one, bell switch 5 Amps complete all as specified.

All as per Ser. Item No. 165.00 above but for One light point controlled by one, two way switch 5 Amps complete all as specified.

All as per item No. 165.00 above but wiring complete with 4.0 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and as directed

S & F for modular Bell push modular 6 Amps single module complete all as specified.

Supply and fix Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S & F for Modular switch one way 6 Amps, 1 module complete all as specified.

S & F for Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified.

S & F for Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

S&F in repairs recessed mounted LED luminaire 10Watt, 6000K with IP 65 Protection conforming to Model LHEOAOP7UZ6WO10 of Make Havells or of equivalent in Wipro, Philips, Luker complete all as specified and as directed.

Supply, lay, test, connecting and commissioning under ground cable, LT 1100 volts grade, heavy duty XLPE insulated, armoured with aluminium stranded conductor complete laid in trenches/fixed to Wall /floor, drawn through pipes with suitable size cable glands crimping type cable lugs etc of size 35 Sqmm 3.5Core, all as specified and directed.

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 100 amps rating & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB all as directed and spd by engr in charge Cat Part No DBVTH004SD L&T equivalant to Havells/Legrand all as specified and as directed.

Supply, fixing and testing LED IP 66 roadway luminarie 45 Watt with suitable size bracket high power LED as light source and electronic driver for 45 Watt LED efficacy 100 lumens/watt CCT 5700K,CRI>70 PF 0.95, IP66, IK 07 SP5KV interval & 10 KV, SPD external, complete all as specified and directed. (Make: Cat Part No :LR02-501-XXX-57-G1 Make : Wipro or equivalent model in Bajaj/Philips)

S&F Ceiling LED recessed Luminaire 600mmx600mm 35/36 Watt, 220VAC with high efficiency PMMA diffuser soft glare free light complete with driver holders &LED lamp suitable for roof,ceiling incl connecting up with driver three core flexible copper conductor cable of suitable size complete

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louverscomplete all as specified and as directed.

Supply and spreading fine dry river sand for cushioning to UG cable including spreading levelling and hand punning etc complete all as specified and directed. (Note : The punned thickness shall only be measured for payment.)

Supply and laying unreinforced precast concrete cover class LV type I, flat size 250mmx150mmx 40mm complete all as specified and as directed.

Gauri Associates

M/s.BAJRANG CONSTRUCTION