REAPIR/MAINT OF EPOXY PAINTING IN AIRCRAFT SHELTERS AND SIGNAGE BOARDS CONNECTED WORKS IN AIRFIELD AT TECH AREA AFS GWALIOR

Amount

M&L for preparation of old existing concrete floor surface of any description and in any position by brooming down/ wire brushing & finally cleaning with compressor and to make the surface dust free and providing 5mm thick antistatic EPU flooring including prime coat, screed coat, conductive coat, self leveling top coat including removing old sealant cleaning and filling existing joints all as per manufacturer’s instructions complete all as specified and as directed. Make : (i) M/s Cipy Poyurethane Pvt Ltd (ii) M/s BASF India Limited (iii) M/s FOSROC (iv) M/s Sika India Pvt Ltd

M &L for preparation surface of epoxy flooring and painting with three coats of polyurethane based paint over a coat of primer to lines , dashes , arrows , letters etc of colour as approved by Airforce authorities and GE complete all as specified and as directed.

S&F in repairs of Runway/links Mandatory and Infromative LED illuminated signage boards front legend facia made out of 4.00 mm thick UV stabilized polycarbonate/ Acrylic sheet with UV printed letters and symbols on facia as per specifications and requirement of Airforce authorities. Colour of background and lettering (size and spacing) shall be as per ICAO Annex-14 volume 1 and Aerodome Design Manual Part 9157 Part 6 complete all as specified and directed by Engr-in-charge. Note:- Quoted rates will include 1. One sample signage board of size 1.92 sqmtr for approval of GE and Airforce authorities before placing order for full Quantity. 2. Replacing of old rubber beading/gasket for fixing in existing Aluminium frame. 3. Change of unserviceable/broken aluminium cleats, hinges, steel screws etc

S&F in repairs of Runway/links Mandatory and Infromative signage boards back cover made out of 2.00 mm thick painted aluminium sheets complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / loose soil complete all as specified and as directed.

S&F in repair aluminium extrusion framed work as in runway/links mandatory and informative signage boards including joining cleats, aluminium snap beading, rubber gasket, U channel etc including necessary fixture complete all as specified & directed. Make : Jindal, Hindalco or Equivalent

S& F in repair of Runway/Links mandatory and informative signage boards front legend facia made out of 4mm thick UV stabilized polycarbonate/ Acrylic sheet with letter and symbols made by computerized cutting of commercial grade retro reflective sheeting pasted with pressure sensitive adhesive provides clear visual information in low light and poor weather as per specifications and requirement of Airforce authorities. Colour of background and lettering (size and spacing) shall be as per ICAO Annex-14 volume 1 and Aerodome Design Manual Part 9157 Part 6 complete all as specified and directed by Engr-in-charge. Note : Rates are included for supplying new rubber gasket to fix above panel in existing aluminium frame.

Demolition of cement concrete (unreinforced) ground floors and pavings of any description and in any position n. exc 15 cm thick below or above G.L including removing and disposal complete all as specified and directed .

M&L for PCC (1:2:4) type B1( using 20mm graded stone aggregate) as in foundation, filling, plinth for DTGM/signage boards etc including necessary formwork complete all as specified and directed

M&L for PCC (1:4:8) type D2 ( using 40mm graded stone aggregate) as in foundation, filling etc including necessary formwork complete all as specified and directed

M&L for 10mm thick rendering on brick work or concrete surfaces of wall in CM 1:6 finished even and smooth complete all as specified and directed.

M/S J P ENTERPRISES

RAVINDRA SALES

M/s Pal Construction

M/S LAKSHYA CONSTRUCTIONS