Construction of Rain Water Harvesting Structure Nag Tibba Top Matiana,Sub Division Matiana Tehsil Theog, Distt. Shimla

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of ;sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts in pick jumper work and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the engineer-in-charge.

Providing and laying cement concrete 1:4:8( 1cement:4 sand:8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in:- foundation and plinth.

Providing and laying CC 1:6:12(1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth

Providing and laying cement concrete work 1:2:4(1cement:2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-charge:-

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting , strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work including all leads and lifts in:-

a)Vertical surfaces such as soffits of suspended floors,roofs,landings and the like including attached pillasters,buttresses, plinth and string courses and the like.

Providing mild steel / tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level. Tor steel

Manufacturing and fixing of GI pipe (Dismentalled pipe to be issued by the Deptt.) Gate 1.00x1.50mtr by cuting and welding of pipes as per standerd design and drawing i/c locking arrangement complete in all respect with all leads and lifts complete.

Manufacturing and fixing of G.I. pipe (Dismentalled pipe to be issued by the deptt.) fencing pole by cutting, welding of pipe 32mm to 50mm dia with necessary M.S. hooks for fixing of square wire mess with all leads and lifts complete.

Supplying and fixing of welded steel wire Mesh fabric as per IS: 4948-2002 with all latest amdt made out of Galvanised Steel wire (as per IS: 280- 1978), IS: 4826-1979 mesh size 50mmx50mm wire dia 3.15mm. fixing with M.S. equal angle 25mmx25mm, 3mm thick & G.I. pipe (Dismentalled ) fencing poles with hooks or nuts and bolts complete in all respect with all leads and lifts.

Mohinder Singh Govt. Contractor