PERIODICAL SERVICES IN MD ACCN OTM ACCN AND WELCOME MAINT OF OFFRS MD ACCN AND INTERNAL ELECTRIFICATION AT EBS BABUGARH UNDER AGE BR II AGE E M I OF GE NORTH MEERUT CANT

Amount

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed

M&L for applying 15mm thick rendering using ready mix plaster bags on brick/concrete surface of external wall finished even and fair complete all as specified and directed Make : Ultratech / Rediplast / Birla Acrocem. Note : Contractor shall deposit ready mix bags for 100% CA quanitity to Engr-in-charge with in 15 days of date of comencement.

M&L rendering 10 mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:3 in chajjas/beam/Ceiling etc with X PM if required to make up to original shape at any height complete all as specified and directed

M&L preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over a coat of chalk whiting complete all as specified and directed

M&L for prepration of new surfaces of walls including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying three coats of white (Lime) wash complete all as specified and directed

M&L for preparing new plastered surfaces of ceiling and appying three coat of white wash complete all as specified and directed

M&L brick work with fly ash old size bricks, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:6 complete all as specified and diretced.

All as per Srl item No 9.00 here-in-before but except bricks

Dismantling floor, hearth or wall tilling including cement mortar bedding complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over CM screed (screed shall be measured and paid for separately under respective item). Jointed complete all as specified and and directed

M&L for 10 mm thick backing coat in cement mortar 1:4 on vertical surfaces of wall complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for light shed vetrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm as in floor etc. set and jointed in neat cement slurray and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for light shed vetrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm as in skirting/ vertical surfaces of wall etc. Set and jointed in neat cement slurray and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. .

M&L for 20 mm thick machine cut Granite stone slab PERFECT BLACK table rubbed polished and round edges as in cooking plateform, steps and window cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigmen to match with shade of graniteomplete all as specified and directed.

M&L for screed bed for layer of 15 mm thick in cement mortar 1:6 to receive the top layer of tiles complete all as specified and directed.

M&L for prepration of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc( Plastered or un plastered surfaces) and applying one coat of white (lime) wash complete all as specified and directed

All as per item No 19.00 here-in-before but one coat of white wash on ceiling

All as per item No 19.00 here-in-before but two coats of white wash on walls.

All as per item No 19.00 here-in-before but two coats of white wash on ceiling.

M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper using roller for painting including over a coat of 2mm thick wall putty wherever required complete all as specified and directed.

M&L for prepration of old decorated surfaces of walls and complete removal of existing treatment including washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil bound distemper using roller for painting over a coat of 2mm thick wall putty complete all as specified and directed.

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint. complete all as specified and directed

M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

All as per item No 27.00 here-in-before but area exc 1.5 Sqm and not exc 4 Sqm each..'

Taking down shutter/ leaf only of any description area exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face pannels, commercial type on both sides complete all as specified and directed. .

S&F 35mm thick IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain fitted with cut and mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I complete all as specified and directed

S&F steel window with pressed steel frame made out from 1.25 mm thick steel sheet with one or more rebate with glazed shutters and mosquito proofing shutter including guard bars, hinges, peg stay, handles, tower bolts, lugs incl treated with tar or coat tar black paint on steel surfaces in contact/ embedded in concrete/ masonary work complete all a specified and shown on drawing complete all as specified and directed

S&F steel ventilator with top hung shutter incl hinges steel peg stay complete all as specified and directed

S&F in repair stainless steel CP Towel rack with rail and hooks size 18" x 24" complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters including aluminium grills , side hung type without sash, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodise aluminium fittings such as peg stays 150mm long(1 No) hinges type B-21 100mm long(2 Nos) suitable handle(1 No) complete all as specified and directed

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed

Hacking out old broken glass ( any thickness, size, quality or description ) from metal frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

M&L for 4.8mm thick sheet glass, fixed with rubber gasket beading and aluminium channels in aluminium door and windows complete all as specified and directed

S&F in repairs 15mm bore dia CP WHB mixer single lever without Popup waste system with 450 mm long copper pipes and brass nut ( Make : Parko / GEM / JAQUAR ) complete all as specified and directed.

S&F 250mm long mild steel sliding door bolts stove enamelled black ISI Marked, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

S&F in repair 250mm long mild steel sliding door bolts stove enamelled black ISI Marked, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

S&F in repairs 100mm size butt hinges medium weight cold rolled mild steel ISI marked complete all as specified and directed

S&F 100mm size butt hinges medium weight cold rolled mild steel ISI marked complete all as specified and directed

S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt ISI Marked complete all as specified and directed

S&F in repair 150mm long mild steel tower bolt stove enamelled black with bright bolt ISI Marked complete all as specified and directed

S&F in repair 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F in repairs 125mm mild steel pressed handles oval type, stove enamelled black complete all as specified and directed

S&F 125mm mild steel pressed handles oval type, stove enamelled black complete all as specified and directed

S&F in repair for 150 mm long aluminium handles cast type complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)” Make: Rajshree, ECOCELL, M/s TVL Engineers Pvt Ltd, New Delhi (Floresta)

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make: Rajshree, ECOCELL, M/s TVL Engineers Pvt Ltd, New Delhi (Floresta) complete all as specified and directed

S&F hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, Size of hasp and staple 100mm complete all as specified and directed.

S&F in repair 300 mm long ordinary mild steel rat tail rod pattern springs including roller roller plate complete fixed to wooden/ steel frame. complete all as specified and directed

S&F in repair for 15mm dia CP brass sink mixer with swan neck complete with two legs all as per sample and specified and directed Make : Peal / Marc / Gem

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm complete all as specified and directed.

Taking down and refixing in the same opening of PVC doors by making edging etc all as specified and directed by Engineer - in - Charge.

S&F in repair continuous (piano) hinges, mild settl, bright finish or electro galvanised, width of flap (when open ) 40 mm complete all as specified and directed.

S&F in repair 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed.

S&F in repair MS CP tubular curtain rod 20mm dia as per sample kept in AGE B/R-II office complete all as specifed and directed.

S&F in repair brass CP brackets and knobs for curtain rod as per sample kept in AGE B/R-II office complete all as specifed and directed. complete all as specified and directed.

M&L in repair 19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work as in cup board shelves kitchen cup borad etc. complete all as specified and directed

S&F in repair ply board grade BWR type BB 11/12 mm thick(9 ply) ISI marked fixed with screw to timber frame work complete all as specified and directed.

S&F in repair 01 mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts to water tanks for water capacity not exc 750 ltrs. complete all as specified and directed and sample kept in AGE B/R - II Office.

S&F in repair mild steel window handle left/right with screws complete all as specified and directed.

S&F in repair peg stay 300 mm for steel window with screws complete all as specified and directed .

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

S&F GI water tubing 15mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F GI water tubing 20mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F in repair angle valve,15 mm cast copper alloy chromium plated fancy type with long shank &cup(concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified and directed.

S&F in repair stop valve,20 mm cast copper alloy chromium plated fancy type with long shank &cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 20 mm bore iron fixed complete all as specified and directed.

S&F in repair cast copper alloy chromium plated bib tap 15 mm bore fancy type with crutch or butterfly handle screwed down, screwed for iron pipe for brass ferrule complete all as specified and directed.

S&F in repair two way bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed

------------BLANK------------------

S&F in repair 15 mm bore dia Pillar taps chromium plated , screwed down with high pressure with or without lettered 'HOT'or 'COLD' with long screwed shanks and fly nuts complete all as speciied and directed.

S&F in repair MS CP grating doom 125 mm dia with waste hole over floor/Nani trap complete all as specified and directed.

S&F in repair CP Health faucet set classic chrome 2 in 1 (with tube and hook) with 1 mtr CP tube & Hook complete all as specified and directed

S&F in repair health faucet set tube of 900 mm to 1200 mm length complete all as specifed and directed.

S&F in repair plate rack of stainless steel 1 mm thick for kitchen or laborotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed.

S&F in repair, vitreous china wash down water closet pan, 'Pedestal' pattern (EWC) integral foot rest or without foot rest including jet spray, seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete complete all as specified and directed.

S&F in repair EWC seat cover with fittings (hinges) complete all as specified and directed.

S&F in repair Toilet papar holder as per sample kept in the office of Engineer-in-Charge complete all as specified and directed

S&F in repairs PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs. complete all as specified and directed

S&F in repair PVC connection fiber suitable for HOT WATER, reinforced 600 mm long with brass check nut and PVC washers at both ends complete complete all as specified and directed

Dismantling of old water tank exc 500 Ltrs & n.exc 1000 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Cleaning of water tanks of capacity exceeding 500 ltr and not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

S&F in reapirs 20 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specifed.

S&F in repair 15 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specifed. make Pearl/Prayag.

S&F in repair 15 mm dia 40 mm long CP brass extension nipple complete all as specifeid and directed.

S&F in repair 15 mm dia 50 mm long CP brass extension nipple complete all as specifeid and directed.

S&F in repair 125mm dia cast copper alloy chromium plated shower rose with arms complete all as specified and directed.

S&F in reair corner glass shelf with bracket as per sample kept in the office of AGE B/R-II complete all as specified by Engineer - in - Charge.

S&F in repair acrylic bathroom corner set of three complete all as specified and directed.

S&F vitreous china WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.

S&F in repair single towel rail 600 mm long complete all as specified and directed

S&F in repair 20 mm dia stainless steel/CP/brass spindle for Bib cock, stop cock, pillar tap, angle wall wall mixer etc half or full turn of any description complete all as specified by Engineer - in - Charge.

S&F in repair brass 2 levers mortice lock verticle type size 100mm with two Stainless steel handles and all fixing components complete all as specified and directed.

Demolition and breaking up drain pipes 75/100 mm dia (salt glazed ware, AC or reinforced concrete) or PVC pipe set in cement mortar complete all as specified and directed

S&F 75 mm PVC (SWR) pipes (pressure rating 6kgf/sqcm) single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes (pressure rating 6kgf/sqcm) single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specieid and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and direted.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified and directed.

S&F in repair UPVC (SWR) cowl, 75 mm bore complete all as specified and directed.

S&F in repair UPVC (SWR) cowl, 110 mm bore complete all as specified and directed.

S&F in repair wall mixer 15mm dia brass chromium plated (3 in 1) as per sample complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges of any description as in roof covering including removal from site complete all as specified and directed.

S&F pre-painted galvalume zinc coating (AZ-150) GI based plain steel sheet 0.50mm thick of any colour having a tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self-tapping screws as specified and directed

Taking down carefully copper/ aluminium point wiring (light, fan,socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed.

M&L for point wiring complete with two runs of 1.5 Sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn thorough and including non metallic medium grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc complete all as specified and as directed for :- (a) One light point controlled by one way switch.

All as per Srl item No 120.00 here-in-before but One light point controlled by 2-way switch.

All as per Srl item No 120.00 here-in-before but One ceiling fan/ exhaust fan point controlled by one way switch.

All as per Srl item No 120.00 here-in-before but One 3 pin socket outlet 5 Amps on the same board with other switches.

All as per Srl item No 120.00 here-in-before but One 3 pin socket outlet 5 Amps on the Independent board.

All as per Srl item No 120.00 here-in-before but One bell/ buzzer point controlled by one push button on the same board with other switches.

All as per Srl item No 120.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

All as per Srl item No 120.00 here-in-before but supply and drawing 1.5 sqmm copper conductor cable with one 1.5 sqmm continuous earth wire into existing conduit after taking out the existing wiring including replacement of required size of terminal box with 3mm thick bakelite sheet cover fixed with brass screws for One light point / Fan point controlled by one way switch. all as specified and as directed.

All as per Srl item No 127.00 here-in-before but One light point controlled by 2-way switch.

All as per Srl item No 127.00 here-in-before but One 3 pin socket outlet 5 Amps on the same board with other switches.

All as per Srl item No 127.00 here-in-before but One 3 pin socket outlet 5 Amps on the Independent board.

All as per Srl item No 127.00 here-in-before but One bell/ buzzer point controlled by one push button on the same board with other switches or independent.

All as per Srl item No 120 here-in-before but with sunk zinc coated pressed steel terminal boxes suitable for modular fixtures including suitable Modular box, base plate and outer plate for One light/Fan/Bell point controlled by one, one way modular switch 06 Amps complete all as specified and as direcited.

All as per Srl item No 132.00 here-in-before but One 06 Amps socket outlet point on independent board controlled by one, one way modular switch 06 Amps.

All as per Srl item No 132.00 here-in-before but One 06 Amps outlet point on same board controlled by one, one way modular switch 06 Amps.

All as per Srl item No 132.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable with earth wire 2.5 sqmm for one 16 Amps socket outlet point on independent board.

S&F in repair Switch Piano, flush type single pole, one way 6 Amps complete all as specified and as directed.

S&F in repair Switch Piano flush type two way 5 Amps complete all as specified and as directed.

S&F in repair Switch Piano, flush type single pole, one way 15 Amps complete all as specified and as directed.

S&F in repair Switch bell push 5 Amps flush type 5 Amps complete all as specified. and directed.

S&F in repair socket outlet 5 pin and 5/6 Amps flush type complete all as specified and as directed.

S&F in repair socket outlet flush type 2 in 1, 3 pin , 5 and 15 Amps complete all as specified and as directed

S&F in repair Stepped type electronic fan regulator flush type SP/DP complete all as specifeid and as directed.

S&F in repair Ceiling rose PVC/ Polycorbonate insulated body with three terminals complete all as specified and as directed.

S&F in repair bell, Ding Dong AC, 230 volts, SP complete all as specifeid and as directed.

S&F in repair Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings including LED lamp 10W complete all as specified and as directed.

S&F in repairs LED tube light fitting surface mounting, CRCA batten decorative box type , 4 feet, 240V, 20 Watt, including T-8 poly carbonate diffuser type 20 watt rectrofit tube rod complete all as specified and as directed.

S&F in repairs integrated LED tube light fitting surface mounting, poly carbonate batten type, 4' , 240V, T5, 20 watt complete all as specified and as directed.

S&F in repairs integrated LED tube light fitting surface mounting, Poly carbonate batten,2', 240V, T5, 9/10 Watt complete all as specified and as directed.

S&F in repairs, IP65, Post Top,energy saving spun Aluminium landscape luminaire with 15 / 20 Watts high power LEDs of Make: Havells /Phillips / Crompton complete all as specified and as directed.

S&F in repairs Retrofit polycarbonate diffuser type 20 watt retrofit LED tube rod 4 feet, 240V compete all as specified and directed.

S&F in repair sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including 25mm dia, medium grade PVC conduit and its accessories and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- two runs of 4.0 Sq mm alongwith one run of 4.0 Sq mm and one run of PVC conduit and its accessories shall be measured as one unit length.

S&F in repair sub main wiring with two runs of 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including 25mm dia medium grade PVC conduit and its accessories and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- two runs of 6.0 Sq mm alongwith one run of 6.0 Sq mm and one run of PVC conduit and its accessories shall be measured as one unit length.

S&F in repair sub main wiring with four runs of 6.0 Sq mm and two run of 6.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including 25mm dia, medium grade PVC conduit and its accessories and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- four runs of 6.0 Sq mm alongwith two runs of 6.0 Sq mm and one run of PVC conduit and its accessories shall be measured as one unit length.

S&F in repair sub main wiring with four runs of 10.0 Sq mm and two run of 10.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including 32mm dia, medium grade PVC conduit and its accessories and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- four runs of 10.0 Sq mm alongwith two runs of 10.0 Sq mm and one run of PVC conduit and its accessories shall be measured as one unit length.

S&F in repair MCB Distribution board double door type (for incoming MCCB & out going MCBs) VTPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing only incoming MCCB and MCBs of various rating capacity complete all as specified and as directed.

S&F in repair MCB Distribution board double door type TPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

S&F in repair MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

S&F in repair MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

S&F in repair MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

S&F in repair MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

S&F in repairs, 4 Pole MCCB 63 Amps, 50 Hz, 415 V with rupturing capacity 16 KA with thermal - Magnetic Release complete all as specified and as directed.

S&F in repairs, 4 Pole MCCB 100 Amps, 50 Hz, 415 V with rupturing capacity 25 KA with thermal - Magnetic Release complete all as specified and as directed.

S&F in repair MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repair Isolator TPN 100 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repair MCB SPN 40 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repair MCB SPN 32 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repair MCB SP 6-32 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repair Modular switch 6A one way complete all as specifeid and as directed.

S&F in repair Modular switch 16A one way complete all as specifeid and as directed.

S&F in repair Modular Socket outlet 6A complete all as specifeid and as directed.

S&F in repair Modular Socket outlet 6/16A complete all as specifeid and as directed.

S&F in repair Modular bell push complete all as specifeid and as directed.

S&F in repairs Modular Step Fan Regulator, 2 module, 120W, AC, 240V, complete all as specified and as directed.

S&F in repair condenser 2.5 MFD suitable for ceiling/ Exhasut fan complete all as specified and as directed.

S&F in repair condenser 3.15 suitable for ceiling/ Exhasut fan complete all as specified and as directed.

S&F in repair LED lamp 15 Watts 2 pin with B22 base, clear acrylic diffuser, power factor .90, 100 lumens per watt all as directed.with inbuilt accessories of capacity 15W complete all as specified and as directed.

All as per Srl item No 176.00 here-in-before but 12 Watts

All as per Srl item No 176.00 here-in-before but 9 Watts

All as per Srl item No 176.00 here-in-before but 5/6 Watts

S&F in repair LED 10 watt (Bulk head light fitting) cast aluminium oval shape body finished with stove enameled & heat resistant oval shape designed clear /diffuser glass cover with rubber gasket.with wire mash guard complete all as specified and as directed.

Supply only insulation tape 20mm width & 25 mtrs length ISI marked complete all as specified and as directed

S&F in repair LED pannel Recess mounted 2'x 2', 36 watts light fitting SIM type with inbuilt including connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose complete accessories and making all necessary connection complete all as specified and as directed

S&F Water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty including taking down old unserviceable one and deposit to AGEE/M-I MES store complete all as specified and derected by Engr-in-charge. Make : Racold / Venus / Havells

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. 5 Star rated with brushless direct current motor (BLDC) including taking down old unserviceable one and deposit to AGEE/M-I MES store complete all as specified and as directed.

S&F in repair LED pannel Recess mounted 2'x 2', 24 watts light fitting SIM type with inbuilt including connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose complete accessories and making all necessary connection complete all as specified and as directed

Carrying out Electrical maint work of day to day Internal Electric or Fans or Geysers or Solar Water Heaters complaints such as repair / rectification / replacement of defective items like wiring, cables, switches, sockets,holders, ceiling rose, call bells, condensers,tube rods,fittings,fixtures,LED drivers, MCB's, MCCB's, DB's, Heating Elements,Thermostats, Hot water connections etc. by providing skilled Technician at any location under GE (North) Meerut AoR all as specified and directed by Engr-in-Charge.(Store required will be provided seperately) complete all as specified and as directed.

S&F in replacement PVC water distributer 3 way with PVC pipe 15 mm with 15 mm dia flexible braided OD for Desert cooler of any size/capacity complete all as specified and as directed.

S&F in replacement Sumersible pump 18 watt, 230V, single phase for Desert cooler of any size/capacity complete all as specified and as directed. Make : Bajaj / CG / Havells

S&F in replacement wood wool pad for desert cooler of suitable size in wire net complete weight not less than 450 gms. ( set of three ) complete all as specified and as directed.

S&F in replacement fan motor copper wounded suitable for desert cooler 230 Volts, 50HZ, single phase, Heavy duty, AC supply four speed 180 watts of 450 mm sweep complete with fan blade and legs completed complete all as specified and as directed. Make : CG /Bajaj / Havells

S&F PVC fresh air fan, 300mm sweep with louvers, AC, 230V incl taking donw old unserviceable one and depositing to AGE E/M-I, MES store complete all as specified and directed.

S&F in repair copper cable 1100 volts grade with multi-stranded copper conductors of size 1.5 Sqmm complete all as specified and as directed

S&F in repair copper cable 1100 volts grade with multi-stranded copper conductors of size 2.5 Sqmm complete all as specified and as directed

S&F in repair copper cable 1100 volts grade with multi-stranded copper conductors of size 4.0 Sqmm complete all as specified and as directed

S&F in repair PVC insulated copper cable 1100 volts grade twin twisted flexible conductor 1.5 sqmm, conform to 23/0.76 complete all as specified and as directed

S&F in repair PVC insulated copper cable 1100 volts grade twin twisted flexible conductor 1.5sqmm conform to 40/0.60 complete all as specified and as directed

S&F in repair Temper proof digital energy meter Single Phase 230 volts of capacity 5-30A complete all as specifeid and as directed. NOTE: Taken down unsv Electric meter of any description will be deposited in AGE E/M-I MES store complete all as specified and as directed.

S&F in repair/ replacement Temper proof digital energy meter three Phase 415 volts of capacity 10-40A complete all as specifeid and as directed. Note : taken down unsv Electric meter of any description will be deposited in AGE E/M-I MES store.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 4.0 mm galvanized iron wire as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 15mm dia med. gr. GI pipe for protection of galvanized iron wire in the ground, further connecting with suitable size of earthing lead to Distribution boards etc., including excavation, earth work, Charcoal & Salt all as specified, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, complete all as specified and as directed. NOTE: a) GI Pipe for protection of earthing strip and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items complete all as specified and as directed.

Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan including connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose fan connector complete all as specified and as directed.

All as per item No. 200.00 here-in-before but exhaust fans of any sweep complete all as specified and as directed.

Dismantling the unserviceable bearing and S&F new sealed bearing suitable for the existing Ceiling fans / exhaust fans complete all as specified and as directed.

Dismantling the unserviceable Gun metal bush and S&F new gun metal bush suitable for existing wall mounted/ pedestal/ exhasut fans complete all as specified and as directed.

Disconnect and remove unserviceable capacitor and S&F new capacitor 2.5 MFD suitable for ceiling fan / exhaust fan complete all as specified and as directed.

Disconnect and remove unserviceable capacitor and S&F new capacitor 3.15 MFD suitable for ceiling fan / exhaust fan complete all as specified and as directed.

Dismantle the unserviceable and S&F new shackle assembly comprising GI bolts, nuts, rubber bush and split pin complete all as specified and as directed.

Material & labour for removing the defective fan winding and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding Ceiling fan of size upto 1200/1400 mm sweep complete all as spedified and as directed.

All as per item No. 207.00 here-in-before but Exhaust fan of size 350 to 450mm Sweep.

All as per item No. 207.00 here-in-before but Exhaust fan of size upto 300 mm Sweep.

Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections, dismantling the unit, painting with one coat of synthetic enamel paint and refixing in its original position and reconnecting the inlet/ outlet water pipes and testing on completion complete all as specified and as directed.

S&F of following items in repairs, suitable for single phase, 230 Volts, 50 Hz for existing type electric Geyser of capacity 25/50 ltrs including taking down unsv spares items complete all as specified and as directed:- (a) Geyser heating element 1.5 kw / 2 kw push/ thread type porcelain / Circular / triangular type as required at site complete all as specified and as directed.

All as per item No. 211.00 here-in-before but Thermostat as per the existing type at site.

All as per item No. 211.00 here-in-before but Thermostate controller of existing type at site.

All as per item No. 211.00 here-in-before but Indication lamp red/ green.

All as per item No. 211.00 here-in-before but Aperture plate assembly complete for the geyser of capacity 25 ltr

All as per item No. 211.00 here-in-before but Aperture plate assembly complete for the geyser of capacity 50 ltr

Taking down the electric geyser of capacity 25 Ltrs / 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, dismantling the unit, taking out the inner leaking copper shell, brazing the copper shall, testing for leaks, re-assembling the geyser including provision of additional glasswool as required, refixing in position, testing for functionality and commissioning complete all as specified and as directed.

Taking down unserviceable PVC connection of any description and S&F new PVC connection 15mm dia 450mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water complete all as specified and as directed.

Taking down unserviceable PVC connection of any description and S&F new PVC connection 15mm dia 600mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water complete all as specified and as directed.

M&L for Servicing of Solar water Heater of any capacity complete by cleaning soar panel with sutable cleaning agent complete all as specified and as directed.

S&F in repairs Solar water heater heating element of capcity 3 KW, single phase, 230 Volts, 50 Hz for existing type Solar water geyser including taking down unsv spares complete all as specified and as directed.

Disconnect and remove unserviceable starting relay and S&F new starting relay suitable for existing model of Water cooler of capacity upto 150 Ltrs complete all as specified and as directed.

All as per item No. 222.00 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable over load protector and S&F new overload protector (OLP) suitable for Water cooler of capacity upto 150 Ltrs complete all as specified and as directed.

All as per item No. 224.00 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable thermostat and S&F new thermostat suitable for existing model of Water cooler of capacity upto 150 Ltrs complete all as specified and as directed.

All as per item No. 226.00 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable starting capacitor and S&F new starting capacitor suitable for existing model of Water cooler of capacity upto 150 Ltrscomplete all as specified and as directed.

All as per item No. 228.00 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable running capacitor and S&F new running capacitor suitable for existing model of Water cooler of capacity upto 150 Ltrs complete as as specified and as directed.

All as per item No. 230.00 here-in-before but Refrigerator/ deep freezer of capacity upto 310 Ltrs

Disconnect and remove unserviceable compressor and S&F new sealed rotary/ reciprocating compressor, including brazing the suction/discharge lines suitable for existing model of Water cooler of capacity 40/80 Ltrs filling the gas and testing on complete all as specified and as directed

All as per item No. 232.00 here-in-before but Water cooler of capacity 60/120 Ltrs

All as per item No. 232.00 here-in-before but Refrigerator/ deep freezer of capacity upto 165 Ltrs

All as per item No. 232.00 here-in-before but Refrigerator/ deep freezer of capacity 310/320 Ltrs

M&L for Checking of leakage of Water cooler of capacity 40/80 Ltrs by putting the nitrogen pressure, identifying the leaks / defects ,repairing the same by brazing/ welding of bottom leg supports and testing and vaccuumising the system and charging suitable refrigerant gas and oil in desired level complete all as specified and as directed .

All as per item No. 236.00 here-in-before but Water cooler of capacity 60/120 Ltrs

All as per item No. 236.00 here-in-before but Refrigerator/ deep freezer of capacity upto 165 Ltrs

All as per item No. 236.00 here-in-before but Refrigerator/ deep freezer of capacity 310/320 Ltrs

Taking down the corroded body of water cooler of any capacity, tinkering the corroded sheet metal parts, bottom base, angle iron frame, fan motor base plate, side covers, legs, door etc. with existing gauge new MS sheet, angles by welding and brazing, renewal of nuts and bolts sheets metal screws, re-assembling, preparing the surface and painting with two coats of synthetic enamel paint over a coat of zinc chrome primer including renewal of door gasket where ever required complete all as specifeid and as directed.

Taking out unserviceable waste water tray of any description and S&F new steel waste water tray suitable for existing water coolers complete all as specified and as directed.

Taking out unserviceable ball valve assembly and S&F new PVC ball valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of size 15 mm dia bore suitable for water coolers / desert coolers complete all as specified and as directed.

Taking out unserviceable push button tap and S&F new chromium plated push button tap of size 15 mm dia bore suitable for water cooler complete all as specified and as directed.

Taking out unserviceable stop valve of any description and S&F new stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of size 15mm dia complete all as specified and as directed.

Taking out unserviceable PVC waste water pipe from Water cooler and S&F new PVC waste water pipe of suitable size complete all as specified and as directed.

Taking out unserviceable plug top of any description and S&F new plug top 3 pin 15 Amps single phase 230 volts complete all as specified and as directed.

Taking out unserviceable plug top of any description and S&F new plug top 3 pin 5 Amps single phase 230 volts complete all as specified and as directed.

Taking down unserviceable plug and socket of any description, S&F sheet metal enclosure with single pole and neutral with two pin and earth plug and socket along with a 20 to 30Amps rated SP MCB, 230 volt, 50 HZ as required at site, complete all as specified and as directed.

Disconnect and remove unserviceable copper cable of any description and S&F new PVC insulated and PVC round sheathed 3 core, 1.5 Sqmm Copper conductor cable, heavy duty, 1100 Volts grade complete all as specified and as directed.

Disconnect and remove unserviceable copper cable of any description and S&F new PVC insulated and PVC round sheathed 3 core, 2.5 Sqmm Copper conductor cable, heavy duty, 1100 Volts grade complete all as specified and as directed.

S&F in repairs 1x25 Watt LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and as directed.

S&F in repairs 1x45 Watt LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and as directed.

Disconnect and remove unserviceable electronic voltage stablizer of any description and S&F automatic electronic voltage stabilizer of capacity 5.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 270V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc. complete all as specified and as directed.

Disconnect and remove unserviceable electronic voltage stablizer of any description and S&F automatic electronic voltage stabilizer of capacity 4.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 270V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc. complete all as specified and as directed.

GARG CONSTRUCTION CO