Construction of Section office building with cash collection center at Pungampally 110 KV SS premises.

Amount

HGS Earth work excavating and depositing on bank with initial lead of 10m and initial lead of 2m in hard stiff clay, Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

SDR Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting, as per standard specification, etc., complete.

MR & DMR Earth work excavating and depositing on Bank with initial lead of 10m and initial lift of 2m in medium rock and dense medium rock not requiring blasting, as per standard specification, etc., complete..

Earth work excavating for foundation in Hard rock by wedging and chiseling and trimming to proper shape where blasting is prohibited including all leads, lifts etc., as per standard specification etc., complete.

Supplying and Filling with M sand for filling the foundation and floor including sand, filling charges, with all leads and lifts, watering, consolidation etc., complete.

Plain cement concrete in CC 1:3:6, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Random rubble masonry, using rubble stone of HBG in CM 1:5 for footings and basement, including cost of cement, all materials labour curing, all leads and lifts,as per standard specification, etc,complete.

Refilling the foundation and basement with excavated earth other sand with all leads and lifts, watering, consolidation etc., complete as per standard specification and as per direction of the Engineer incharge.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for plinth beam including cost of cement, all materials, labour, curing, vibration charges,with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement)

Flush pointing with C.M 1:3, for the exposed faces of R.R. masonry including cost of cement, raking charges, all materials, labour, curing, all leads and lifts as per standard specification, etc., complete.

Providing anti-termite treatment over the plinth area of building (Foundation stage, flooring stage and outside of the building) including cost of approved chemical, lead, lift, etc., complete.

Brick work in C.M. 1:6 using class II chamber burnt table moulded bricks for super structure including, cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete.

Brick work in C.M. 1:4 using class II chamber burnt table moulded bricks for partition walls and others including, cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lintel beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for sill beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Sunshades of 600 mm with 80 mm thick at wall and 50 mm thick at free end including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Elevation Sunshade of 1000 mm with 100mm thick including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) including cost of cement, all materials, labour, curing, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab of 125mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for septic tank cover slab of 100 mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for septic tank Baffle wall 50mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Providing steel reinforcement MS/RTS rods for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Plastering with CM 1:5, 12mm thick including cost of cement, labour, curing, all leads and lifts etc., complete as per standard specification.

Plastering with CM 1:3, 12 mm thick including cost of cement, labour, curing, all leads and lifts etc., complete as per standard specification.

White washing two coats for ceiling using best quality of white cement including cost of all materials, labour, curing, all leads & lifts etc., complete, as per standard specification

Painting two coats of plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping of old surface, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Dadooing walls with Glazed tiles of approved quality and colour of size 150x150x6mm with ISI mark, laid in CM 1:2, 10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joint , and pointing flush with tile surface including cost of all materials, lead, lift, labour, curing etc., complete.

Supplying and laying of Vitrified floor tiles slippery/non slippery tiles of approved quality and colour with ISI mark, laid in c.m 1:2 10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joint , and pointing flush with tilesurface including cost of all materials,lead, lift, labour, curing etc., complete.

Flooring with PCC 1:3:6 using 40mm HBG machine crushed metal, including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, including cost of centering, shutting, as per standard specification, etc., complete.

Supplying and fixing of Doors (Double leaf) of size 1.20 x 2.10m using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffeners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffeners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Supplying and fixing of PVC door for toilet with frame of approved quality and make with fitting with all materials lead lift, etc complete as per standard specification.

Supplying and fixing of Windows (4 Leaves) of 1.20 x 1.35m approved size using 35x35x5mm MS angle for outer frame 25x25x3mm angle for shutter frame with shutter 18 gauge M.S.Sheet and 12mm dia bars as horizontal 11 Nos.with necessary locking arrangements including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour, cost of all materials, leads, lifts labour etc., complete.

Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame and M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm 'T' section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend required and made good to the original conditions after fixing as directed by the officers etc., complete.

Supplying and providing PPGI sheet roof of 0.5mm thick including cost of all materials leads, lifts, labour charges etc., complete.

Supplying and filling well gravel for section office site with all leads and lifts, watering, consolidating etc., complete as per standard specification and as per direction of the Engineer incharge.

Weathering course with broken brick jelly 20mm size in pure slacked lime over R.C.C. roof slab, the proportion being 32:12:5 for required depth of 80 mm for giving required slope and thickness to roof as required well beaten with wooden beaters and laying one course of pressed tiles of 23 cm x 23cm x 2 cm size using CM 1:3, mixed with crude oil 10 percent by weight of cement and pointed with the same oiled mortar including cost of cement, all materials, labour, curing, all leads and lifts, etc., complete as per standard specification.

Supplying and fixing white glazed earthen ware (oriya type) Indian water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift, etc., complete, as per standard specification.

Supplying and fixing white glazed earthen ware wash hand basin of size 22"x16" reputed make with tap, one soap tray, one Gate valve and fibre beading Mirror of size 24" x 18" including cost of all fitting materials lead lift transporting, labour charges etc. complete, as per standard specification.

Supplying and fixing of 600mm long aluminium towel rod, including cost of all materials, labour, lead, lift, as per standard specification, etc. complete

Providing PVC down fall rain water pipe of 110 mm dia of 4 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing of 25 mm dia PVC pipe 10 Kg/cm2 for water supply line, including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Supplying and fixing of 40 mm dia PVC pipe 10Kg/cm2 of appd. quality for water supply line from water sump and delivery line including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Supplying and fixing of 25 mm dia GM gate valve appd. quality for water supply line including labour, lead, lift and fixing in position etc., complete.

Supplying and fixing of 40 mm dia GM Gate valve appd. quality for water supply line including labour, lead, lift and fixing in position etc., complete.

Supplying & fixing of cuddapah slab polished both sides for cup-Board, 20mm thick including all materials, lead, lift and fixing in position etc., complete.

Supplying Godrej Navthal lock of approved good quality lock of reputed make including cost of all materials, labour, lead, lift, as per standard specification etc complete.

Supplying and fixing of 1000 liters PVC water tank (white coated) of approved quality with ISI mark including cost of all materials labour for connection, lead, lift etc., complete as per standard specification.

Providing fixing 12mm Pillar cock water supply tap including cost of pipe and labour fixing charges lead, lift, as per standard specification etc. complete

Providing and fixing ventilating shaft of PVC pipe 110 mm dia of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing 110 mm dia PVC Tee of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing of 110 mm dia PVC pipe for sewage line of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Providing cast iron man hole cover of size 600 x 600 mm cover of heavy duty including cost of all materials, labour, all lead, lift, as per standard specification , etc., complete.

Wiring with 2x2.50 sq.mm PVC unsheathed SC copper cable of 1100V. Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories and with T.W suitable box on wall, covered with hylem sheet of 3mm thick with painting of suitable colour continuous earth wire connection of 14SWG TC. wire for PVC light and fan point.

Wiring with 2x2.50 sq.mm.PVC unsheathed SC copper conductor of 1100V. Grade in suitable PVC rigid pipe concealed on wall and ceiling with PVC accessories in with 150mm x100mm x113mm T.W switch box with 3mm thick Hylem sheet cover for 5A 3pin non inter locking CS plug with continuous earth wire connection of 14SWG TC wire PVC plug point.

Wiring with 2x4.00 sq.mm.PVC unsheathed SC copper conductor of 1100V. Grade in suitable PVC rigid pipe concealed on wall and ceiling with PVC accessories in with 150mm x100mm x113mm T.W switch box with 3mm thick Hylem sheet cover for 15A 3pin non inter locking CS plug with continuous earth wire connection of 14SWG TC wire PVC plug point.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.

Supplying and fixing of ISI make 4 way triple pole and natural MCB Distn Board with 1 No. 32 Amps DPIC switch of 500V as incoming 6 Nos. 32 Amps SPMCB outgoing necessary hug with wall and making good of concealed portion with earthy etc., complete.

Earthing with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and fixing of meter board suitable for 32 A three phase service coonection with 3Nos 32 A fuse unit (500V) 32 A netural link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from meter to fuse unit.

Supplying and fixing the 45 W Led model No BRP 320, 1X24 LED-HP/ CWPSCGR fitting with pipes, leads etc., philips make or equivalent make.

Supplying and fixing of 4ft 40 W street light fittings with copper choke and condenser with conduit pipe suspension from the ceiling with PVC unsheated copper leads from the terminals to the fitting with flu. Tubes.

Filling with 40 mm metal in dispersion trench including all materials, spreading, labour, lead, lift etc., complete.

Supplying and fixing of MS grills of required size including painting two coats ready mixed enamel paint with one coat of red oxide primer approved quality and colourcost of all materials fabrication charges including cost of all materials labour charges, lead, lift etc., complete.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu

DHARIENEESH HOUSING DEVELOPERS

PERUMAL.S.K