GE 874/EWS-64/2022-23

Amount

B/R Portion

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, in soft/loose soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) in foundations filling and mass concrete.

S&F pre painted galvatume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

M&L for prepration of new steel surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer all as directed by Engr-in-charge.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

Excavation over area n.exc 1.5m deep and getting out in soft loose soil complete all as specified and as directed.

Removing of excavated material exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

Removing of excavated material exc. 250m but notexc 500m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete, all as specified.

M&L for two coat of cement base paint over a coat of Alkali resistant primer to newly plastered surfaces of wall incl preparation of surface complete.

M&L Hardcore of gauge exc. 63mm, n exc 100mm deposited, spread and levelled in layers n exc. 15cm thick, watered, rolled and rammed to a true surface of broken stone or boulders.

M& L for 100mm Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floors Finishing cement concrete surface even and smooth using extra cement.

M& L for 100mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified.

M& L for Plastic dividing strips, 1.5 mm thick 22mm wide for floors.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair, complete all as specified and as directed.

M&L for 40 mm sand cushion under paving block including watering and consolidation for interlocking tiles all as specified.

S&F machine pressed precast concrete interlocking paver block 80mm thick any shape with grey cement and no pigment confirming to IS-15658-2006 M-40 Grade complete all as specified and as directed.

M&l providing cement concrete 1:2:4 type B-1 in kerb or mud stops rounded or chamfered on edges all as specified.

M/S RAFIQ AHMAD SOFI AND SONS

M/s Pall Constructions

M/S MOHD YOUSUF CONSTRUCTION CO

G N T CONSTRUCTION CO

M/S Thakur & Sons

RATHER BROTHERS

patriotic builders

M/S BEE AAY CONSTRUCTIONS

Bidder Name

patriotic builders

RATHER BROTHERS

G N T CONSTRUCTION CO

M/s Pall Constructions

M/S Thakur & Sons

M/S RAFIQ AHMAD SOFI AND SONS

M/S BEE AAY CONSTRUCTIONS

m/s mohd saleem and co

M/S MOHD YOUSUF CONSTRUCTION CO