PROVN OF SHED OVER EXISTING HARD STANDING (INTERLOCKING TILES) FOR B VEHS AT EPU, PROVN OF SEPTIC TANK NEAR JCOS LIVING AND ONE BATHROOM IN LOC OF CIB AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R I UNDER GE PANAGARH

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and directed.

All as per Item No 1.00 above but exc 1.5 m depth and n.exc 3.0 m in depth complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40 mm graded stone aggregates) as in foundations,fillings and mass concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 4.00 above but 6mm to 8mm dia complete all as specified and directed.

All as per item No 4.00 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat fair finished surfaces of concrete complete all as specified and directed..

S&F roof trusses (framed) of angle iron members trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.

M&L for preparation of painting of new steel surfaces over 10 cm in width or girth over a coat of primer using red oxide and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for Brickwork with fly ash old sized bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finish smooth & even with using extra cement complete all as specified and directed

M&L for Preparing new surfaces of walls plastered and white washing with three coats of white wash on walls complete all as specified and directed.

Excavation over areas, n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed.

M&L for brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Supply only Integral Water proofing compound complete all as specified and directed.. (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L rendering 15 mm thick cement plaster in CM 1:6 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC (WPC will be measured and paid separately).

M&L for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) mixed with water proofing compound complete all as specified and directed. Note:-WPC measured and paid separately complete all as specified and directed.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete wall surfaceS&Finishing the surfaces fair and even on ceiling complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including Preparation of new plastered surfaces complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed..

M&L for broken stones hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed

M&L for 75 mm thick PCC type C-1, 1:3:6 as in sub base and plinth protection/hardstanding (using 20 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed for floor finishes complete all as specified and directed

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

S&F Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all completed as specified and as directed.

S&F in tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed

S&F in stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified complete all as specified and directed.

S&F in angle valve cast copper alloy chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified complete all as specified and directed.

S&F in Brass chromium plated shower rose 125mm with or without swivel joints, including fixing to steel pipe or union size complete all as specified and directed

S&F in Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and directed.

M&L glazed ceramic coloured tiles 350 x 250 mm x 7/ 450 x 350 x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in CM (1:3) on brick or concrete surfaces complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F anodised powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Sheet glass 4.00 mm thick,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed..

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed..

S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed..

S&F Vitreous China wash down water closet pan (pedestal pattern with seat cover), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

Supply only 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets (Fixing rate included in Ser item No 42 above of WC item) complete all as specified and directed.

S&F vitreous china wash basin white, flat back, size 550X400 mm including cutting for pinning in ends of brackets, complete all as specified and directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed..

S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed..

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F Vitreus China bowl urinal flat back Size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete all as specified and directed.

S&F Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed.

M&L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed..

M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and directed

M&L for cast- in- situ cement concrete in Type B0 1:2:4 (12.5 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills,steps and other similar bands, plinth courses,string courses and railings upto 60cm in height ,copings,apex stones,kerbs and the like including weathering, slightly rounded or chamfered angles and throating as desired complete all as directed by the Engr-in-charge.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC (1:2:4) 100 mm thick Type B1 (using 20 mm graded stone aggregate) used as in floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and directed

M&L for 150 mm thick in two layers of each 75 mm thick in pavings,with mix of fly ash ,clinker & stone dust in the proportion of 1:3:6 ( i.e. 10% fly ash,30% clinker & 60% stone dust) laying in layers n.exc 15 cm thick ,watering ,ramming and compacted complete all as directed by Engr-in-charge .

M&L for 100 mm thick PCC Type D - 2, 1:4:8 (using 40 mm graded stone aggregate) used as in sub base floor/pavings complete all as specified.

M&L for Machine prepolished pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M- 35 Grade with grey cement and pigments complete all as specified and as directed.

M&L for providing precast cement concrete in Type B1 1:2:4 (20 mm graded aggregate) in windows or door cills, lintels , bressumers,steps quoin blocks (for use with masonry) string courses, copings, kneelers,apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders , landings, manhole cover etc with plain fair faces, including chamfers, weatherings, throating, etc and setting in mortar CM (1:4) complete with joints to match all as specified and as directed by the Engr-in-charge.

M&L for Brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in modular bricks in CM (1:4) complete all as specified and as directed.

S&F PVC (SWR) pipes of 110 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard dense soilcomplete all as specified and as directed.

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor/pavings and finishing cement concrete surface for receiving floor finishes complete all as specified and as directed.

Excavation in post holes not exc 0.50 cum, getting out, returning filling in and ramming earth, watering and removing surplus soil not exc 50 m in soft/loose soil

M&L for chequered cement tiles 300 X 300 x 25 mm thick set and jointed and pointed in neat cement slurry with gray cement and pigment and over including 15 mm thick screed bed in CM (1:6) complte all as specified. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

S&F framed work as in doors or gates of angle or other section of Fe 410 -W (Gde- E- 250) quality-A Fe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L for preparation of new plastered surfaces of wall and applying three coat of white washing complete all as specified.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick ,spread, levelled and rammed including watering complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) 100 mm thick as in sub base of floor for receiving floor finishes.

S&F closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engr-in-Charge.

S&F 125 mm Brass Chromium Plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engr-in-charge.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.

S&F 25 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.

S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed by Engr-in-charge.

S&F Rotational moulded polyethyline water storage tanks 500 ltrs (Cylindrical vertical with closed top minimum three layer) hoisted and fixed in position all as directed by Engr-in-charge. Make: Sintex/Vectus/Prayag

S&F 15 mm bore angle valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed..

S&F 25 mm dia ball valve, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms), screwed for iron pipes or brasas ferrule, complete all as per specified and as directed by Engr-in-charge.

E/M Portion M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC Cassing capping and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

M&L for switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F surface down light square made of aluminium PDC with high lumen pakage 18 watt complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

S&F surface down light square made of aluminium PDC with high lumen pakage 9 watt complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), triple pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

S&F MCB SPN 40 Amps, 'C' curve, 240 Volts,ISI marked and to be housed in DBs complete including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F XLPE armoured cable 10 sqmm 2 core,1100 volts grade heavy duty cable, passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

S&F GI light grade 40mm dia of size for road cross/cutting on wall,floor,drain etc complete all as specified and directed

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

M&L wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc.complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F sheet metal enclosure with 20 Amp Mcb and two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.

Supply and fixing wall security light fittings 35 watts 230v, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as specified and directed.

S&F 10 W LED light fitting mirror type 2',220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

S&F exhaust ventilation fan with louvers of sweep 300mm,230 volts, with blade and frame and loures steel body,complete all as directed by Engr-in-Charge.

S&F LED light fitting 1x 20 W LED light AC decorative box type 4' with driver , holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. Note: all wire connection with suitable sizw copper lugs

S&F 240V, 10 KA 'c' series 10 KA 240 volts miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&Fin repairs MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. (Note: Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F XLPE armoured cable 16 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed.

S&F 1000 Ltrs Rotational /moulded Polyehtylene water tank (Cylindrical vertical with closed top, minimum three layer) hoisted & fixed in position complete all as specified and directed.

S&F 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings all as specified & as directed including taking down old unseviceable pipe complete all as specified and directed.

All as per item No 124.00 above but 40 mm bore complete all as specified and directed.

S&F water heater storage type electric of capacity 25 ltrs BEE 5 star rated including Pvc connection pipe ,drill in wall and fixing properly with sitable fastner nut bolt etc complete testing and commisioning by Engr-in-charge all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts and bolt 450mm long with connecting items all as directed by Engr-in-Charge.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed Make : Havells/ABB/Legrand

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size conduit pipe PVC concealed conduits and fittings of medium grade, including PVC/pressed steel terminal Modular switch boxes with cover plate and frame upto 2 to 8 module size and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No.130.00 above but 5 Amp socket on indipendant board with wire 2.5 Sqmm other switches complete all as specified and directed..

M&L for point wiring for Geyser point controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size conduit pipe PVC concealed conduits and fittings of medium grade, including PVC/pressed steel terminal Modular switch boxes with cover plate and frame upto 2 to 8 module size and 4 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

S&F switch modular type 6 Amp one way, one module, single phase, complete all as specified and directed by Engr-in-charge.

S&F switch modular type 16/20 Amp one way, one module, single phase, complete all as specified and directed by Engr-in-charge.

S&F socket outlet modular type 6 Amp 2/3 pin , two module, single phase, complete all as specified and directed by Engr-in-charge.

S&F socket outlet modular type 16 Amp 2/3 pin , two module, single phase, complete all as specified and directed by Engr-in-charge.

S&F LED light fitting 2 feet 1x 10 W LED light AC decorative box type with driver , holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

M/s BISWAJIT GHOSH

M/S BHATTACHARJEE ENTERPRISE

M/S S M ENTERPRISE

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

INDIAN CONSTRUCTION