REPAIR RESURFACING OF ROAD ALONGWITH THERMOPLASTIC PAINTING 100 MM AT DOMESTIC AREA AT ARC CHARBATIA

M&L Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm complete all as specified and directed.

M&L 7.5cm thick (compacted thickness) WBM, granite trap or basalt with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

All as per Item No 2 here in before but except materials

Preparing of WBM surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 10 KG per 10 Sq.m of paving bitumen complete all as specified and directed.

M & L Brick edgings with burnt clay bricks of sub class B old size bricks Continuous brick edging; with width equal to the width of the brick; laid dry on end vertically including for embedding bricks in the ground to depths indicated and tamping ground around bricks and also for removing any surplus spoil complete all as specified and directed.

M&L Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using 4% binder paving bitumen of grade VG-30 complete all as specified and directed.

M & L for repair to Pot Holes exceeding 30 mm depth, not exceeding 1.00 Sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm depth, making good by applying tack coat with bituminous primer at 5 Kg per 10 Sq.m, and putting in bituminous Premixed Asphaltic Semi Dense Concrete and again well rammed with power road roller of 8 to 12 ton capacity and consolidated including supply of premixed macadam, binder and chipping complete all as specified and directed.

Preparing existing Black Top Surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen complete all as specified and directed.

M & L for laying Bituminous Premixed Semi Dense Asphaltic Concrete, 40 mm consolidated thickness, using paving bitumen of Grade VG – 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and directed. Note : (a) Rate deemed to be included for making good of any undulation/damages in wearing surfaces, where semi dense asphaltic concrete to be laid. (b) Semi dense ashphaltic bituminous concrete shall be designed as specified and binder content shall be provided as per design mix, contractor shall quoted his rates considering the bitumen contents as 5.5%. Any variation in binder content on minus side shall be adjusted at the rate of Rs 75.00 per kilogram of binder but variation in binder plus side shall not be paid extra contractor shall quote accordingly.

M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MORT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and directed.